[PATCH 2/2] dt-bindings: i2c: imx-lpi2c: Add bus recovery example

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Tue May 30 07:58:32 PDT 2023


On 29/05/2023 09:43, carlos.song at nxp.com wrote:
> From: Clark Wang <xiaoning.wang at nxp.com>
> 
> Add i2c bus recovery configuration example.

Why? That's just example... also with coding style issue.

> 
> Signed-off-by: Clark Wang <xiaoning.wang at nxp.com>
> Signed-off-by: Carlos Song <carlos.song at nxp.com>
> ---
>  .../devicetree/bindings/i2c/i2c-imx-lpi2c.yaml   | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
> index 4656f5112b84..62ee457496e4 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
> @@ -58,6 +58,16 @@ properties:
>    power-domains:
>      maxItems: 1
>  
> +  pinctrl-names:
> +    minItems: 1
> +    maxItems: 3

What's the benefit of this? Entries should be defined but without it is
not really helpful. Anyway not explained in commit msg.

> +
> +  scl-gpios:
> +    maxItems: 1
> +
> +  sda-gpios:
> +    maxItems: 1

You don't need these two. Anyway not explained in commit msg.

> +
>  required:
>    - compatible
>    - reg
> @@ -70,6 +80,7 @@ examples:
>    - |
>      #include <dt-bindings/clock/imx7ulp-clock.h>
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/gpio/gpio.h>
>  
>      i2c at 40a50000 {
>          compatible = "fsl,imx7ulp-lpi2c";
> @@ -78,4 +89,9 @@ examples:
>          interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
>          clocks = <&clks IMX7ULP_CLK_LPI2C7>,
>                   <&clks IMX7ULP_CLK_NIC1_BUS_DIV>;
> +        pinctrl-names = "default","gpio";

Missing space.

> +        pinctrl-0 = <&pinctrl_i2c>;
> +        pinctrl-1 = <&pinctrl_i2c_recovery>;
> +        scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +        sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
>      };

Best regards,
Krzysztof




More information about the linux-arm-kernel mailing list