[PATCH v3 5/5] thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation

[Bernhard Rosenkränzer]

From: Balsam CHIHI <bchihi at baylibre.com>

Update LVTS calibration data documentation for mt8192 and mt8195.

Signed-off-by: Balsam CHIHI <bchihi at baylibre.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado at collabora.com>
[bero at baylibre.com: Fix issues pointed out by Nícolas F. R. A. Prado <nfraprado at collabora.com>]
Signed-off-by: Bernhard Rosenkränzer <bero at baylibre.com>
---
 drivers/thermal/mediatek/lvts_thermal.c | 31 +++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index d5e5214784ece..9185d02003633 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -531,7 +531,8 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
  * The efuse blob values follows the sensor enumeration per thermal
  * controller. The decoding of the stream is as follow:
  *
- * stream index map for MCU Domain :
+ * MT8195 :
+ * Stream index map for MCU Domain mt8195 :
  *
  * <-----mcu-tc#0-----> <-----sensor#0-----> <-----sensor#1----->
  *  0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09
@@ -542,7 +543,7 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
  * <-----mcu-tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> <-----sensor#7----->
  *  0x13 | 0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21
  *
- * stream index map for AP Domain :
+ * Stream index map for AP Domain mt8195 :
  *
  * <-----ap--tc#0-----> <-----sensor#0-----> <-----sensor#1----->
  *  0x22 | 0x23 | 0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A
@@ -556,6 +557,32 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
  * <-----ap--tc#3-----> <-----sensor#7-----> <-----sensor#8----->
  *  0x40 | 0x41 | 0x42 | 0x43 | 0x44 | 0x45 | 0x46 | 0x47 | 0x48
  *
+ * MT8192 :
+ * Stream index map for MCU Domain mt8192 :
+ *
+ * <-----mcu-tc#0-----> <-----sensor#0----->        <-----sensor#1----->
+ *  0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09 | 0x0A | 0x0B
+ *
+ * <-----sensor#2----->        <-----sensor#3----->
+ *  0x0C | 0x0D | 0x0E | 0x0F | 0x10 | 0x11 | 0x12 | 0x13
+ *
+ * <-----sensor#4----->        <-----sensor#5----->        <-----sensor#6----->        <-----sensor#7----->
+ *  0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21 | 0x22 | 0x23
+ *
+ * Stream index map for AP Domain mt8192 :
+ *
+ * <-----sensor#0----->        <-----sensor#1----->
+ *  0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A | 0x2B
+ *
+ * <-----sensor#2----->        <-----sensor#3----->
+ *  0x2C | 0x2D | 0x2E | 0x2F | 0x30 | 0x31 | 0x32 | 0x33
+ *
+ * <-----sensor#4----->        <-----sensor#5----->
+ *  0x34 | 0x35 | 0x36 | 0x37 | 0x38 | 0x39 | 0x3A | 0x3B
+ *
+ * <-----sensor#6----->        <-----sensor#7----->        <-----sensor#8----->
+ *  0x3C | 0x3D | 0x3E | 0x3F | 0x40 | 0x41 | 0x42 | 0x43 | 0x44 | 0x45 | 0x46 | 0x47
+ *
  * The data description gives the offset of the calibration data in
  * this bytes stream for each sensor.
  */
-- 
2.41.0.rc2