[PATCH] arm64: dts: mt7986: use size of reserved partition for bl2

[Matthias Brugger]

On 28/05/2023 13:33, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w at public-files.de>
> 
> To store uncompressed bl2 more space is required than partition is
> actually defined.
> 
> There is currently no known usage of this reserved partition.
> Openwrt uses same partition layout.
> 
> We added same change to u-boot with commit d7bb1099 [1].
> 
> [1] https://source.denx.de/u-boot/u-boot/-/commit/d7bb109900c1ca754a0198b9afb50e3161ffc21e
> 
> Cc: stable at vger.kernel.org
> Fixes: 8e01fb15b815 ("arm64: dts: mt7986: add Bananapi R3")
> Signed-off-by: Frank Wunderlich <frank-w at public-files.de>

Applied, thanks!

> ---
> If the bl2 does not fit into the bl2-partition (cut off), board does
> not boot, thats why i want to increase it now. My current bl2 is 197K
> for nor and i ran into this problem.
> 
> Openwrt uses also the first reserved partition to give bl2 more
> space:
> 
> https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-nor.dts;h=f597b869abc80d1a73f44ebb85ad4da17376bb52;hb=HEAD#l22
> 
> so imho it should be same in mainline to not require complex bl2
> compression.
> 
> have now sent the board-specific dts to uboot too:
> https://source.denx.de/u-boot/u-boot/-/commit/d7bb109900c1ca754a0198b9afb50e3161ffc21e
> ---
>   .../boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso     | 7 +------
>   1 file changed, 1 insertion(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
> index 84aa229e80f3..e48881be4ed6 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
> @@ -27,15 +27,10 @@ partitions {
>   
>   					partition at 0 {
>   						label = "bl2";
> -						reg = <0x0 0x20000>;
> +						reg = <0x0 0x40000>;
>   						read-only;
>   					};
>   
> -					partition at 20000 {
> -						label = "reserved";
> -						reg = <0x20000 0x20000>;
> -					};
> -
>   					partition at 40000 {
>   						label = "u-boot-env";
>   						reg = <0x40000 0x40000>;