[PATCH 5/6] ARM: dts: bcm21664-garnet: use node labels

[Stanislav Jakubek]

Use node labels instead of nodename at address for BCM21664 Garnet
to simplify its DTS file.

Signed-off-by: Stanislav Jakubek <stano.jakubek at gmail.com>
---
 arch/arm/boot/dts/bcm21664-garnet.dts | 46 +++++++++++++--------------
 1 file changed, 23 insertions(+), 23 deletions(-)

diff --git a/arch/arm/boot/dts/bcm21664-garnet.dts b/arch/arm/boot/dts/bcm21664-garnet.dts
index dead91d97b63..8789fae178bf 100644
--- a/arch/arm/boot/dts/bcm21664-garnet.dts
+++ b/arch/arm/boot/dts/bcm21664-garnet.dts
@@ -15,33 +15,33 @@ memory at 80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
+};
 
-	serial at 3e000000 {
-		status = "okay";
-	};
+&sdio1 {
+	max-frequency = <48000000>;
+	status = "okay";
+};
 
-	sdio1: mmc at 3f180000 {
-		max-frequency = <48000000>;
-		status = "okay";
-	};
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	status = "okay";
+};
 
-	sdio2: mmc at 3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		status = "okay";
-	};
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
 
-	sdio4: mmc at 3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
-		status = "okay";
-	};
+&uartb {
+	status = "okay";
+};
 
-	usbotg: usb at 3f120000 {
-		status = "okay";
-	};
+&usbotg {
+	status = "okay";
+};
 
-	usbphy: usb-phy at 3f130000 {
-		status = "okay";
-	};
+&usbphy {
+	status = "okay";
 };
-- 
2.25.1