[PATCH 3/6] ARM: dts: bcm-mobile: move status properties to the end of nodes

[Stanislav Jakubek]

Move some DT "status" properties so that they're the last specified
property (before sub-nodes).

Signed-off-by: Stanislav Jakubek <stano.jakubek at gmail.com>
---
 arch/arm/boot/dts/bcm11351.dtsi   | 8 ++++----
 arch/arm/boot/dts/bcm21664.dtsi   | 6 +++---
 arch/arm/boot/dts/bcm23550.dtsi   | 6 +++---
 arch/arm/boot/dts/bcm28155-ap.dts | 8 ++++----
 4 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index f395e95e0177..773d717de7f0 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -51,42 +51,42 @@ smc at 3404c000 {
 
 	serial at 3e000000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e000000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
 		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
 	serial at 3e001000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e001000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
 		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
 	serial at 3e002000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e002000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
 	serial at 3e003000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e003000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
 	L2: l2-cache at 3ff20000 {
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
index 19ade84e42c1..9e3835a0a7ef 100644
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -51,32 +51,32 @@ smc at 3404e000 {
 
 	serial at 3e000000 {
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e000000 0x118>;
 		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
 		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
 	serial at 3e001000 {
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e001000 0x118>;
 		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
 		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
 	serial at 3e002000 {
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e002000 0x118>;
 		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
 	L2: cache-controller at 3ff20000 {
diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi
index ed3ce2fabca6..445eadb8d871 100644
--- a/arch/arm/boot/dts/bcm23550.dtsi
+++ b/arch/arm/boot/dts/bcm23550.dtsi
@@ -129,32 +129,32 @@ slaves at 3e000000 {
 
 		uartb: serial at 0 {
 			compatible = "snps,dw-apb-uart";
-			status = "disabled";
 			reg = <0x00000000 0x118>;
 			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			status = "disabled";
 		};
 
 		uartb2: serial at 1000 {
 			compatible = "snps,dw-apb-uart";
-			status = "disabled";
 			reg = <0x00001000 0x118>;
 			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			status = "disabled";
 		};
 
 		uartb3: serial at 2000 {
 			compatible = "snps,dw-apb-uart";
-			status = "disabled";
 			reg = <0x00002000 0x118>;
 			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			status = "disabled";
 		};
 
 		bsc1: i2c at 16000 {
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index c496e33a71a6..0a8ad1d673d8 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -21,23 +21,23 @@ serial at 3e000000 {
 	};
 
 	i2c at 3e016000 {
-		status = "okay";
 		clock-frequency = <400000>;
+		status = "okay";
 	};
 
 	i2c at 3e017000 {
-		status = "okay";
 		clock-frequency = <400000>;
+		status = "okay";
 	};
 
 	i2c at 3e018000 {
-		status = "okay";
 		clock-frequency = <400000>;
+		status = "okay";
 	};
 
 	i2c at 3500d000 {
-		status = "okay";
 		clock-frequency = <100000>;
+		status = "okay";
 
 		pmu: pmu at 8 {
 			reg = <0x08>;
-- 
2.25.1