[PATCH 14/15] ARM: dts: imx6qdl-var-dart: Use the mux- prefix

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

According to Documentation/devicetree/bindings/sound/imx-audmux.yaml,
there must be a "mux-" prefix in the audmux port nodes.

Add the "mux-" prefix to avoid devicetree schema warnings.

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 arch/arm/boot/dts/imx6qdl-var-dart.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
index c41cac502bac..200559d7158d 100644
--- a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
@@ -39,7 +39,7 @@ &audmux {
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -51,7 +51,7 @@ IMX_AUDMUX_V2_PDCR_RXDSEL(2)
 		>;
 	};
 
-	aud3 {
+	mux-aud3 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
-- 
2.34.1