[PATCH 09/15] ARM: dts: imx6dl-qmx6: Use the mux- prefix

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

According to Documentation/devicetree/bindings/sound/imx-audmux.yaml,
there must be a "mux-" prefix in the audmux port nodes.

Add the "mux-" prefix to avoid devicetree schema warnings.

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 arch/arm/boot/dts/imx6dl-qmx6.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/imx6dl-qmx6.dtsi
index 150d69858255..05fd8ff4da1e 100644
--- a/arch/arm/boot/dts/imx6dl-qmx6.dtsi
+++ b/arch/arm/boot/dts/imx6dl-qmx6.dtsi
@@ -48,7 +48,7 @@ &audmux {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_audmux>;
 
-	audmux_ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSDIR |
@@ -60,7 +60,7 @@ IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT6)
 		>;
 	};
 
-	audmux_aud6 {
+	mux-aud6 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT6>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
-- 
2.34.1