[PATCH v4 03/11] coresight-tpdm: Initialize DSB subunit configuration

Tao Zhang quic_taozha at quicinc.com
Thu May 25 01:12:53 PDT 2023


On 5/23/2023 9:42 PM, Suzuki K Poulose wrote:
> On 27/04/2023 10:00, Tao Zhang wrote:
>> DSB is used for monitoring “events”. Events are something that
>> occurs at some point in time. It could be a state decode, the
>> act of writing/reading a particular address, a FIFO being empty,
>> etc. This decoding of the event desired is done outside TPDM.
>> DSB subunit need to be configured in enablement and disablement.
>> A struct that specifics associated to dsb dataset is needed. It
>> saves the configuration and parameters of the dsb datasets. This
>> change is to add this struct and initialize the configuration of
>> DSB subunit.
>>
>> Signed-off-by: Tao Zhang <quic_taozha at quicinc.com>
>> ---
>>   drivers/hwtracing/coresight/coresight-tpdm.c | 60 
>> +++++++++++++++++++++++++---
>>   drivers/hwtracing/coresight/coresight-tpdm.h | 17 ++++++++
>>   2 files changed, 72 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/hwtracing/coresight/coresight-tpdm.c 
>> b/drivers/hwtracing/coresight/coresight-tpdm.c
>> index ba1867f..6f8a8ab 100644
>> --- a/drivers/hwtracing/coresight/coresight-tpdm.c
>> +++ b/drivers/hwtracing/coresight/coresight-tpdm.c
>> @@ -20,17 +20,51 @@
>>     DEFINE_CORESIGHT_DEVLIST(tpdm_devs, "tpdm");
>>   +static void tpdm_reset_datasets(struct tpdm_drvdata *drvdata)
>> +{
>> +    if (drvdata->datasets & TPDM_PIDR0_DS_DSB) {
>> +        memset(drvdata->dsb, 0, sizeof(struct dsb_dataset));
>> +
>> +        drvdata->dsb->trig_ts = true;
>> +        drvdata->dsb->trig_type = false;
>> +    }
>> +}
>> +
>> +static void set_trigger_type(struct tpdm_drvdata *drvdata, u32 *val)
>> +{
>> +    if (drvdata->dsb->trig_type)
>> +        *val |= TPDM_DSB_CR_TRIG_TYPE;
>> +    else
>> +        *val &= ~TPDM_DSB_CR_TRIG_TYPE;
>> +}
>> +
>
> Given this is not reused, we could simply inline it in the caller
> to avoid creating a confusion, like other operations ?
Sure, I will update it in the next patch series.
>
>>   static void tpdm_enable_dsb(struct tpdm_drvdata *drvdata)
>>   {
>>       u32 val;
>>   -    /* Set the enable bit of DSB control register to 1 */
>> +    val = readl_relaxed(drvdata->base + TPDM_DSB_TIER);
>> +    /* Set trigger timestamp */
>> +    if (drvdata->dsb->trig_ts)
>> +        val |= TPDM_DSB_TIER_XTRIG_TSENAB;
>> +    else
>> +        val &= ~TPDM_DSB_TIER_XTRIG_TSENAB;,
>> +    writel_relaxed(val, drvdata->base + TPDM_DSB_TIER);
>> +
>>       val = readl_relaxed(drvdata->base + TPDM_DSB_CR);
>> +    /* Set trigger type */
>> +    set_trigger_type(drvdata, &val);
>> +    /* Set the enable bit of DSB control register to 1 */
>>       val |= TPDM_DSB_CR_ENA;
>>       writel_relaxed(val, drvdata->base + TPDM_DSB_CR);
>>   }
>>     /* TPDM enable operations */
>> +/* The TPDM or Monitor serves as data collection component for various
>
> minor nit: Please could you extend the existing comment than adding a
> new multi-line comment ?
Sure, I will update it in the next patch series.
>
>> + * dataset types. It covers Basic Counts(BC), Tenure Counts(TC),
>> + * Continuous Multi-Bit(CMB), Multi-lane CMB(MCMB) and Discrete Single
>> + * Bit(DSB). This function will initialize the configuration according
>> + * to the dataset type supported by the TPDM.
>> + */
>>   static void __tpdm_enable(struct tpdm_drvdata *drvdata)
>>   {
>>       CS_UNLOCK(drvdata->base);
>> @@ -110,15 +144,24 @@ static const struct coresight_ops tpdm_cs_ops = {
>>       .source_ops    = &tpdm_source_ops,
>>   };
>>   -static void tpdm_init_default_data(struct tpdm_drvdata *drvdata)
>> +static int tpdm_datasets_setup(struct tpdm_drvdata *drvdata)
>>   {
>>       u32 pidr;
>>   -    CS_UNLOCK(drvdata->base);
>>       /*  Get the datasets present on the TPDM. */
>>       pidr = readl_relaxed(drvdata->base + CORESIGHT_PERIPHIDR0);
>>       drvdata->datasets |= pidr & GENMASK(TPDM_DATASETS - 1, 0);
>> -    CS_LOCK(drvdata->base);
>
> Why are we removing the CS_{UN,}LOCK here ?

CS_UNLOCK is used before writing data to Coresight registers. Here this 
function

doesn't need to write data to any registers, so I remove the 
CS_{UN,}LOCK here.


Best,

Tao

>
> Rest looks OK to me.
>
> Suzuki
>
>> +
>> +    if (drvdata->datasets & TPDM_PIDR0_DS_DSB) {
>> +        if (!drvdata->dsb) {
>> +            drvdata->dsb = devm_kzalloc(drvdata->dev,
>> +                            sizeof(*drvdata->dsb), GFP_KERNEL);
>> +            if (!drvdata->dsb)
>> +                return -ENOMEM;
>> +        }
>> +    }
>> +
>> +    return 0;
>>   }
>>     /*
>> @@ -181,6 +224,7 @@ static int tpdm_probe(struct amba_device *adev, 
>> const struct amba_id *id)
>>       struct coresight_platform_data *pdata;
>>       struct tpdm_drvdata *drvdata;
>>       struct coresight_desc desc = { 0 };
>> +    int ret;
>>         pdata = coresight_get_platform_data(dev);
>>       if (IS_ERR(pdata))
>> @@ -200,6 +244,12 @@ static int tpdm_probe(struct amba_device *adev, 
>> const struct amba_id *id)
>>         drvdata->base = base;
>>   +    ret = tpdm_datasets_setup(drvdata);
>> +    if (ret)
>> +        return ret;
>> +
>> +    tpdm_reset_datasets(drvdata);
>> +
>>       /* Set up coresight component description */
>>       desc.name = coresight_alloc_device_name(&tpdm_devs, dev);
>>       if (!desc.name)
>> @@ -216,7 +266,7 @@ static int tpdm_probe(struct amba_device *adev, 
>> const struct amba_id *id)
>>           return PTR_ERR(drvdata->csdev);
>>         spin_lock_init(&drvdata->spinlock);
>> -    tpdm_init_default_data(drvdata);
>> +
>>       /* Decrease pm refcount when probe is done.*/
>>       pm_runtime_put(&adev->dev);
>>   diff --git a/drivers/hwtracing/coresight/coresight-tpdm.h 
>> b/drivers/hwtracing/coresight/coresight-tpdm.h
>> index 5438540..68f33bd 100644
>> --- a/drivers/hwtracing/coresight/coresight-tpdm.h
>> +++ b/drivers/hwtracing/coresight/coresight-tpdm.h
>> @@ -11,8 +11,14 @@
>>     /* DSB Subunit Registers */
>>   #define TPDM_DSB_CR        (0x780)
>> +#define TPDM_DSB_TIER        (0x784)
>> +
>>   /* Enable bit for DSB subunit */
>>   #define TPDM_DSB_CR_ENA        BIT(0)
>> +/* Enable bit for DSB subunit trigger type */
>> +#define TPDM_DSB_CR_TRIG_TYPE        BIT(12)
>> +/* Enable bit for DSB subunit trigger timestamp */
>> +#define TPDM_DSB_TIER_XTRIG_TSENAB        BIT(1)
>>     /* TPDM integration test registers */
>>   #define TPDM_ITATBCNTRL        (0xEF0)
>> @@ -41,6 +47,16 @@
>>   #define TPDM_PIDR0_DS_DSB    BIT(1)
>>     /**
>> + * struct dsb_dataset - specifics associated to dsb dataset
>> + * @trig_ts:          Enable/Disable trigger timestamp.
>> + * @trig_type:        Enable/Disable trigger type.
>> + */
>> +struct dsb_dataset {
>> +    bool            trig_ts;
>> +    bool            trig_type;
>> +};
>> +
>> +/**
>>    * struct tpdm_drvdata - specifics associated to an TPDM component
>>    * @base:       memory mapped base address for this component.
>>    * @dev:        The device entity associated to this component.
>> @@ -57,6 +73,7 @@ struct tpdm_drvdata {
>>       spinlock_t        spinlock;
>>       bool            enable;
>>       unsigned long        datasets;
>> +    struct dsb_dataset    *dsb;
>>   };
>>     #endif  /* _CORESIGHT_CORESIGHT_TPDM_H */
>
> _______________________________________________
> CoreSight mailing list -- coresight at lists.linaro.org
> To unsubscribe send an email to coresight-leave at lists.linaro.org



More information about the linux-arm-kernel mailing list