[PATCH v3 2/3] dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5

AngeloGioacchino Del Regno angelogioacchino.delregno at collabora.com
Wed May 24 02:45:30 PDT 2023


Il 24/05/23 10:30, Julien Stephan ha scritto:
> From: Florian Sylvestre <fsylvestre at baylibre.com>
> 
> This adds the bindings, for the MIPI CD-PHY module v0.5 embedded in
> some Mediatek soc, such as the mt8365
> 
> Signed-off-by: Florian Sylvestre <fsylvestre at baylibre.com>
> Signed-off-by: Julien Stephan <jstephan at baylibre.com>
> ---
>   .../bindings/phy/mediatek,mt8365-csi-rx.yaml  | 67 +++++++++++++++++++
>   MAINTAINERS                                   |  6 ++
>   2 files changed, 73 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml
> new file mode 100644
> index 000000000000..a1bd96a98051
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml
> @@ -0,0 +1,67 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2023 MediaTek, BayLibre
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/mediatek,mt8365-csi-rx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek Sensor Interface MIPI CSI CD-PHY
> +
> +maintainers:
> +  - Julien Stephan <jstephan at baylibre.com>
> +  - Andy Hsieh <andy.hsieh at mediatek.com>
> +
> +description:
> +  The SENINF CD-PHY is a set of CD-PHY connected to the SENINF CSI-2
> +  receivers. The number of PHYs depends on the SoC model.
> +  Depending on the SoC model, each PHYs can be either CD-PHY or D-PHY only
> +  capable.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - mediatek,mt8365-csi-rx
> +
> +  reg:
> +    maxItems: 1
> +
> +  '#phy-cells':
> +    const: 0
> +
> +  mediatek,phy-type:

Instead of declaring a phy-type here like this, can't we instead declare that in
the phy cells, like we're doing with MTK TPHY and like other non-MediaTek PHYs are
already doing?

device {
	...
	phys = <&csi0_rx PHY_TYPE_CDPHY>;
	...
}

Regards,
Angelo





More information about the linux-arm-kernel mailing list