[PATCH v5 15/25] PM / devfreq: rockchip-dfi: give variable a better name
Sascha Hauer
s.hauer at pengutronix.de
Wed May 24 01:31:43 PDT 2023
struct dmc_count_channel::total counts the clock cycles of the DDR
controller. Rename it accordingly to give the reader a better idea
what this is about. While at it, at some documentation to struct
dmc_count_channel.
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
drivers/devfreq/event/rockchip-dfi.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/devfreq/event/rockchip-dfi.c b/drivers/devfreq/event/rockchip-dfi.c
index 8a7af7c32ae0d..50e497455dc69 100644
--- a/drivers/devfreq/event/rockchip-dfi.c
+++ b/drivers/devfreq/event/rockchip-dfi.c
@@ -46,9 +46,14 @@
#define DDRMON_CH1_COUNT_NUM 0x3c
#define DDRMON_CH1_DFI_ACCESS_NUM 0x40
+/**
+ * struct dmc_count_channel - structure to hold counter values from the DDR controller
+ * @access: Number of read and write accesses
+ * @clock_cycles: DDR clock cycles
+ */
struct dmc_count_channel {
u32 access;
- u32 total;
+ u32 clock_cycles;
};
struct dmc_count {
@@ -150,7 +155,7 @@ static void rockchip_dfi_read_counters(struct rockchip_dfi *dfi, struct dmc_coun
continue;
count->c[i].access = readl_relaxed(dfi_regs +
DDRMON_CH0_DFI_ACCESS_NUM + i * 20);
- count->c[i].total = readl_relaxed(dfi_regs +
+ count->c[i].clock_cycles = readl_relaxed(dfi_regs +
DDRMON_CH0_COUNT_NUM + i * 20);
}
}
@@ -182,29 +187,29 @@ static int rockchip_dfi_get_event(struct devfreq_event_dev *edev,
struct rockchip_dfi *dfi = devfreq_event_get_drvdata(edev);
struct dmc_count count;
struct dmc_count *last = &dfi->last_event_count;
- u32 access = 0, total = 0;
+ u32 access = 0, clock_cycles = 0;
int i;
rockchip_dfi_read_counters(dfi, &count);
/* We can only report one channel, so find the busiest one */
for (i = 0; i < DMC_MAX_CHANNELS; i++) {
- u32 a, t;
+ u32 a, c;
if (!(dfi->channel_mask & BIT(i)))
continue;
a = count.c[i].access - last->c[i].access;
- t = count.c[i].total - last->c[i].total;
+ c = count.c[i].clock_cycles - last->c[i].clock_cycles;
if (a > access) {
access = a;
- total = t;
+ clock_cycles = c;
}
}
edata->load_count = access * 4;
- edata->total_count = total;
+ edata->total_count = clock_cycles;
dfi->last_event_count = count;
--
2.39.2
More information about the linux-arm-kernel
mailing list