[RFC PATCH v1 1/4] iio: adc: Add Allwinner D1/T113s/R329 SoCs GPADC

Maxim Kiselev bigunclemax at gmail.com
Wed May 24 01:27:30 PDT 2023


The General Purpose ADC (GPADC) can convert the external signal into
a certain proportion of digital value, to realize the measurement of
analog signal, which can be applied to power detection and key detection.

D1, T113s and R329 contain this GPADC IP. The only difference between
this SoCs is the number of available channels:

 T113 - 1 channel
 D1   - 2 channels
 R329 - 4 channels

Signed-off-by: Maxim Kiselev <bigunclemax at gmail.com>
---
 drivers/iio/adc/Kconfig            |  10 ++
 drivers/iio/adc/Makefile           |   1 +
 drivers/iio/adc/sun20i-gpadc-iio.c | 275 +++++++++++++++++++++++++++++
 3 files changed, 286 insertions(+)
 create mode 100644 drivers/iio/adc/sun20i-gpadc-iio.c

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index eb2b09ef5d5b..988804f46bf6 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -1123,6 +1123,16 @@ config SUN4I_GPADC
 	  To compile this driver as a module, choose M here: the module will be
 	  called sun4i-gpadc-iio.
 
+config SUN20I_GPADC
+	tristate "Support for the Allwinner SoCs GPADC"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	help
+	  Say yes here to build support for Allwinner (D1, T113 and R329) SoCs
+	  GPADC. This ADC provides up to 4 channels.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called sun20i-gpadc-iio.
+
 config TI_ADC081C
 	tristate "Texas Instruments ADC081C/ADC101C/ADC121C family"
 	depends on I2C
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index e07e4a3e6237..fc4ef71d5f8f 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o
 obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o
 obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
 obj-$(CONFIG_SUN4I_GPADC) += sun4i-gpadc-iio.o
+obj-$(CONFIG_SUN20I_GPADC) += sun20i-gpadc-iio.o
 obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o
 obj-$(CONFIG_STM32_ADC) += stm32-adc.o
 obj-$(CONFIG_STM32_DFSDM_CORE) += stm32-dfsdm-core.o
diff --git a/drivers/iio/adc/sun20i-gpadc-iio.c b/drivers/iio/adc/sun20i-gpadc-iio.c
new file mode 100644
index 000000000000..90f3bb2e41cd
--- /dev/null
+++ b/drivers/iio/adc/sun20i-gpadc-iio.c
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * GPADC driver for sunxi platforms (D1, T113-S3 and R329)
+ * Copyright (c) 2023 Maksim Kiselev <bigunclemax at gmail.com>
+ */
+
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+
+#define SUN20I_GPADC_SR					0x00
+
+#define SUN20I_GPADC_CTRL				0x04
+#define SUN20I_GPADC_CTRL_ADC_FIRST_DLY			((GENMASK(7, 0) & (x)) << 24)
+#define SUN20I_GPADC_CTRL_ADC_AUTOCALI_EN		BIT(23)
+#define SUN20I_GPADC_CTRL_ADC_OP_BIAS			((GENMASK(1, 0) & (x)) << 20)
+#define SUN20I_GPADC_CTRL_WORK_MODE_SELECT(x)		((GENMASK(1, 0) & (x)) << 18)
+#define SUN20I_GPADC_CTRL_ADC_CALI_EN			BIT(17)
+#define SUN20I_GPADC_CTRL_ADC_EN			BIT(16)
+
+#define SUN20I_GPADC_CS_EN				0x08
+#define SUN20I_GPADC_CS_EN_ADC_CHAN_CMP_EN(x)		((GENMASK(16, 0) & BIT(x)) << 16)
+#define SUN20I_GPADC_CS_EN_ADC_CHAN_SELECT(x)		(GENMASK(16, 0) & BIT(x))
+
+#define SUN20I_GPADC_DATA_INTC				0x28
+#define SUN20I_GPADC_DATA_INTC_CHAN_DATA_IRQ_EN(x)	(GENMASK(16, 0) & BIT(x))
+
+#define SUN20I_GPADC_DATA_INTS				0x38
+#define SUN20I_GPADC_DATA_INTS_DATA_PENDING(x)		(GENMASK(16, 0) & BIT(x))
+#define SUN20I_GPADC_DATA_INTS_DATA_PENDING_MASK	GENMASK(16, 0)
+
+#define SUN20I_GPADC_CHAN_DATA(x)			(0x80 + (x) * 4)
+
+#define SUN20I_GPADC_TIMEOUT				msecs_to_jiffies(100)
+#define SUN20I_GPADC_MAX_CHANNELS			16
+
+struct sun20i_gpadc_configuration {
+	const struct iio_chan_spec	*channels;
+	u8				num_channels;
+};
+
+struct sun20i_gpadc_iio {
+	struct iio_dev			*indio_dev;
+	struct regmap			*regmap;
+	struct completion		completion;
+	struct mutex			lock;
+};
+
+#define SUN20I_GPADC_ADC_CHANNEL(_channel) {			\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.channel = _channel,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+}
+
+static const struct iio_chan_spec sun8i_t113_gpadc_channels[] = {
+	SUN20I_GPADC_ADC_CHANNEL(0),
+};
+
+static const struct iio_chan_spec sun20i_d1_gpadc_channels[] = {
+	SUN20I_GPADC_ADC_CHANNEL(0),
+	SUN20I_GPADC_ADC_CHANNEL(1),
+};
+
+static const struct iio_chan_spec sun50i_r329_gpadc_channels[] = {
+	SUN20I_GPADC_ADC_CHANNEL(0),
+	SUN20I_GPADC_ADC_CHANNEL(1),
+	SUN20I_GPADC_ADC_CHANNEL(2),
+	SUN20I_GPADC_ADC_CHANNEL(3),
+};
+
+static const struct sun20i_gpadc_configuration sun20i_gpadc_config[] = {
+	{ sun8i_t113_gpadc_channels, ARRAY_SIZE(sun8i_t113_gpadc_channels) },
+	{ sun20i_d1_gpadc_channels, ARRAY_SIZE(sun20i_d1_gpadc_channels) },
+	{ sun50i_r329_gpadc_channels, ARRAY_SIZE(sun50i_r329_gpadc_channels) },
+};
+
+static const struct regmap_config sun20i_gpadc_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.fast_io = true,
+};
+
+static int sun20i_gpadc_adc_read(struct sun20i_gpadc_iio *info,
+				 struct iio_chan_spec const *chan, int *val)
+{
+	reinit_completion(&info->completion);
+
+	/* enable the analog input channel */
+	regmap_write(info->regmap, SUN20I_GPADC_CS_EN,
+		     SUN20I_GPADC_CS_EN_ADC_CHAN_SELECT(chan->channel));
+
+	/* enable the data irq for input channel */
+	regmap_write(info->regmap, SUN20I_GPADC_DATA_INTC,
+		     SUN20I_GPADC_DATA_INTC_CHAN_DATA_IRQ_EN(chan->channel));
+
+	/* enable the ADC function */
+	regmap_update_bits(info->regmap, SUN20I_GPADC_CTRL,
+			   SUN20I_GPADC_CTRL_ADC_EN, SUN20I_GPADC_CTRL_ADC_EN);
+
+	if (!wait_for_completion_timeout(&info->completion,
+					 SUN20I_GPADC_TIMEOUT))
+		return -ETIMEDOUT;
+
+	/* read the ADC data */
+	regmap_read(info->regmap, SUN20I_GPADC_CHAN_DATA(chan->channel), val);
+
+	return IIO_VAL_INT;
+}
+
+static int sun20i_gpadc_read_raw(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan, int *val,
+				 int *val2, long mask)
+{
+	struct sun20i_gpadc_iio *info = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&info->lock);
+		ret = sun20i_gpadc_adc_read(info, chan, val);
+		mutex_unlock(&info->lock);
+		return ret;
+	case IIO_CHAN_INFO_SCALE:
+		/* 1800mV / 4096 * raw */
+		*val = 0;
+		*val2 = 439453125;
+		return IIO_VAL_INT_PLUS_NANO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static irqreturn_t sun20i_gpadc_irq_handler(int irq, void *data)
+{
+	struct sun20i_gpadc_iio *info = data;
+	u32 reg;
+
+	/* clear data interrupt status register */
+	regmap_read(info->regmap, SUN20I_GPADC_DATA_INTS, &reg);
+	regmap_write(info->regmap, SUN20I_GPADC_DATA_INTS, reg);
+
+	complete(&info->completion);
+
+	return IRQ_HANDLED;
+}
+
+static const struct iio_info sun20i_gpadc_iio_info = {
+	.read_raw = sun20i_gpadc_read_raw,
+};
+
+static int sun20i_gpadc_probe(struct platform_device *pdev)
+{
+	const struct sun20i_gpadc_configuration *config;
+	struct iio_dev *indio_dev;
+	struct sun20i_gpadc_iio *info;
+	struct reset_control *rst;
+	void __iomem *base;
+	struct clk *clk;
+	int irq;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	info = iio_priv(indio_dev);
+	platform_set_drvdata(pdev, indio_dev);
+
+	mutex_init(&info->lock);
+	init_completion(&info->completion);
+
+	info->indio_dev = indio_dev;
+	indio_dev->info = &sun20i_gpadc_iio_info;
+	indio_dev->name = dev_name(&pdev->dev);
+
+	config = of_device_get_match_data(&pdev->dev);
+	if (!config)
+		return -ENODEV;
+
+	/* Sanity check for possible later IP variants with more channels */
+	if (config->num_channels > SUN20I_GPADC_MAX_CHANNELS)
+		return dev_err_probe(&pdev->dev, -EINVAL,
+				     "max channels exceeded\n");
+
+	indio_dev->channels = config->channels;
+	indio_dev->num_channels = config->num_channels;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	info->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+					     &sun20i_gpadc_regmap_config);
+	if (IS_ERR(info->regmap))
+		return dev_err_probe(&pdev->dev, PTR_ERR(info->regmap),
+				     "failed to init regmap\n");
+
+	clk = devm_clk_get_enabled(&pdev->dev, NULL);
+	if (IS_ERR(clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(clk),
+				     "failed to enable bus clock\n");
+
+	rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(rst))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rst),
+				     "failed to get reset control\n");
+
+	ret = reset_control_deassert(rst);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				    "failed to deassert reset\n");
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return dev_err_probe(&pdev->dev, irq, "failed to get irq\n");
+
+	ret = devm_request_irq(&pdev->dev, irq, sun20i_gpadc_irq_handler,
+			       0, dev_name(&pdev->dev), info);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "failed requesting irq %d\n", irq);
+
+	/* set the single conversion mode and enable auto calibration*/
+	regmap_write(info->regmap, SUN20I_GPADC_CTRL,
+		     SUN20I_GPADC_CTRL_ADC_AUTOCALI_EN |
+		     SUN20I_GPADC_CTRL_WORK_MODE_SELECT(0));
+
+	ret = devm_iio_device_register(&pdev->dev, indio_dev);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "could not register the device\n");
+
+	return 0;
+}
+
+static const struct of_device_id sun20i_gpadc_of_id[] = {
+	{
+		.compatible = "allwinner,sun8i-t113-gpadc",
+		.data = &sun20i_gpadc_config[0],
+	},
+	{
+		.compatible = "allwinner,sun20i-d1-gpadc",
+		.data = &sun20i_d1_gpadc_channels[1]
+	},
+	{
+		.compatible = "allwinner,sun50i-r329-gpadc",
+		.data = &sun50i_r329_gpadc_channels[2]
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sun20i_gpadc_of_id);
+
+static struct platform_driver sun20i_gpadc_driver = {
+	.driver = {
+		.name = "sun20i-gpadc-iio",
+		.of_match_table = sun20i_gpadc_of_id,
+	},
+	.probe = sun20i_gpadc_probe,
+};
+module_platform_driver(sun20i_gpadc_driver);
+
+MODULE_DESCRIPTION("ADC driver for sunxi platforms");
+MODULE_AUTHOR("Maksim Kiselev <bigunclemax at gmail.com>");
+MODULE_LICENSE("GPL");
-- 
2.39.2




More information about the linux-arm-kernel mailing list