[PATCH 5/8] arm64: dts: qcom: Add SDX75 platform and IDP board support
Konrad Dybcio
konrad.dybcio at linaro.org
Fri May 19 10:28:23 PDT 2023
On 19.05.2023 11:09, Rohit Agarwal wrote:
> Add basic devicetree support for SDX75 platform and IDP board from
> Qualcomm. The SDX75 platform features an ARM Cortex A55 CPU which forms
> the Application Processor Sub System (APSS) along with standard Qualcomm
> peripherals like GCC, TLMM, UART, QPIC, and BAM etc... Also, there
> exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
> etc..
>
> This commit adds basic devicetree support.
>
> Signed-off-by: Rohit Agarwal <quic_rohiagar at quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/sdx75-idp.dts | 19 ++
> arch/arm64/boot/dts/qcom/sdx75.dtsi | 534 +++++++++++++++++++++++++++++++++
> 3 files changed, 554 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sdx75-idp.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sdx75.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index d42c595..4fd5a18 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -173,6 +173,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sdx75-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
> new file mode 100644
> index 0000000..e2e803b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
> @@ -0,0 +1,19 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "sdx75.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. SDX75 IDP";
> + compatible = "qcom,sdx75-idp", "qcom,sdx75";
> + qcom,board-id = <0x2010022 0x302>;
You should be able to get by without qcom,{msm,board}-id.
> +
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <110 6>;
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
> new file mode 100644
> index 0000000..c2b8810
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
> @@ -0,0 +1,534 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * SDX75 SoC device tree source
> + *
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + *
> + */
> +
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + qcom,msm-id = <556 0x10000>;
> + interrupt-parent = <&intc>;
> +
> + chosen: chosen { };
> +
> + memory {
The memory node should have a unit address.
> + device_type = "memory";
> + reg = <0 0 0 0>;
> + };
> +
> + clocks { };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
[...]
> +
> + CLUSTER_PD: power-domain-cpu-cluster0 {
> + #power-domain-cells = <0>;
> + domain-idle-states = <&CLUSTER_SLEEP_0 &CX_RET &CLUSTER_SLEEP_1>;
Is CLUSTER_SLEEP_1 deeper than CX retention?
> + };
> + };
> +
> + firmware {
> + scm: scm {
> + compatible = "qcom,scm-sdx75", "qcom,scm";
> + };
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + gunyah_hyp_mem: memory at 80000000 {
reserved memory subnodes should have meaningful node names, e.g.
hypervisor at 800...
> + reg = <0x0 0x80000000 0x0 0x800000>;
> + no-map;
> + };
> +
[...]
> +
> + smem: qcom,smem {
> + compatible = "qcom,smem";
> + memory-region = <&smem_mem>;
> + hwlocks = <&tcsr_mutex 3>;
> + };
> +
> + soc: soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
Are the SoC buses limited to 32b addresses?
> + compatible = "simple-bus";
Compatible should go first.
> +
> + tcsr_mutex: hwlock at 1f40000 {
> + compatible = "qcom,tcsr-mutex";
> + reg = <0x0 0x01f40000 0x0 0x40000>;
> + #hwlock-cells = <1>;
> + };
> +
> + pdc: interrupt-controller at b220000 {
> + compatible = "qcom,sdx75-pdc", "qcom,pdc";
> + reg = <0x0 0xb220000 0x0 0x30000>,
> + <0x0 0x174000f0 0x0 0x64>;
> + qcom,pdc-ranges = <0 147 52>,
> + <52 266 32>,
> + <84 500 59>;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&intc>;
> + interrupt-controller;
> + };
> +
> + tlmm: pinctrl at f000000 {
> + compatible = "qcom,sdx75-tlmm";
> + reg = <0x0 0x0f000000 0x0 0x400000>;
> + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 133>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + wakeup-parent = <&pdc>;
> + };
> +
> + apps_smmu: iommu at 15000000 {
> + compatible = "qcom,sdx75-smmu-500", "arm,mmu-500";
> + reg = <0x0 0x15000000 0x0 0x40000>;
> + #iommu-cells = <2>;
> + #global-interrupts = <2>;
> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
Many newer SoCs have dma-coherent SMMUs. Is this the case here?
> + };
> +
> + intc: interrupt-controller at 17200000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + #redistributor-regions = <1>;
> + redistributor-stride = <0x0 0x20000>;
> + reg = <0x0 0x17200000 0x0 0x10000>,
> + <0x0 0x17260000 0x0 0x80000>;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + timer at 17420000 {
> + compatible = "arm,armv7-timer-mem";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + reg = <0x0 0x17420000 0x0 0x1000>;
> + clock-frequency = <19200000>;
clock-frequency is discouraged, unless strictly necessary.
Since gh is running, the timer is already programmed so it should be
fine to drop this.
[...]
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
> + clock-frequency = <19200000>;
Ditto
Konrad
> + };
> +};
More information about the linux-arm-kernel
mailing list