[PATCH V9 3/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver
Yu Tu
yu.tu at amlogic.com
Wed May 17 00:02:14 PDT 2023
Add the S4 PLL clock controller driver in the s4 SoC family.
Signed-off-by: Yu Tu <yu.tu at amlogic.com>
---
drivers/clk/meson/Kconfig | 13 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/s4-pll.c | 907 +++++++++++++++++++++++++++++++++++++
drivers/clk/meson/s4-pll.h | 87 ++++
4 files changed, 1008 insertions(+)
create mode 100644 drivers/clk/meson/s4-pll.c
create mode 100644 drivers/clk/meson/s4-pll.h
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index fc002c155bc3..a663c90a3f3b 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -115,4 +115,17 @@ config COMMON_CLK_G12A
help
Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
devices, aka g12a. Say Y if you want peripherals to work.
+
+config COMMON_CLK_S4_PLL
+ tristate "S4 SoC PLL clock controllers support"
+ depends on ARM64
+ default y
+ select COMMON_CLK_MESON_MPLL
+ select COMMON_CLK_MESON_PLL
+ select COMMON_CLK_MESON_REGMAP
+ help
+ Support for the pll clock controller on Amlogic S805X2 and S905Y4 devices,
+ aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229.
+ Say Y if you want the board to work, because plls are the parent of most
+ peripherals.
endmenu
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 6eca2a406ee3..376f49cc13f1 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -19,3 +19,4 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
+obj-$(CONFIG_COMMON_CLK_S4_PLL) += s4-pll.o
diff --git a/drivers/clk/meson/s4-pll.c b/drivers/clk/meson/s4-pll.c
new file mode 100644
index 000000000000..c70a33586bcd
--- /dev/null
+++ b/drivers/clk/meson/s4-pll.c
@@ -0,0 +1,907 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson-S4 PLL Clock Controller Driver
+ *
+ * Copyright (c) 2021 Amlogic, inc.
+ * Author: Yu Tu <yu.tu at amlogic.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-mpll.h"
+#include "clk-pll.h"
+#include "clk-regmap.h"
+#include "s4-pll.h"
+
+static DEFINE_SPINLOCK(meson_clk_lock);
+
+static struct clk_regmap s4_fixed_pll_dco = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = ANACTRL_FIXPLL_CTRL1,
+ .shift = 0,
+ .width = 17,
+ },
+ .l = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = ANACTRL_FIXPLL_CTRL0,
+ .shift = 29,
+ .width = 1,
+ },
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fixed_pll_dco",
+ /*
+ * This clock is a fixed value (4GHz) that is initialized by ROMcode.
+ * This clock won't ever change at runtime.
+ * The chip design determines that this clock cannot be changed after
+ * initialization. To prevent system crash caused by changing
+ * fixed related register in kernel phase. This register is not
+ * writable in the kernel phase.
+ * So we use ro_ops.
+ */
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", }
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_fixed_pll = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = ANACTRL_FIXPLL_CTRL0,
+ .shift = 16,
+ .width = 2,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fixed_pll",
+ /*
+ * This clock is a fixed value (2GHz) that is initialized by ROMcode.
+ * For more information, please refer to s4_fixed_pll_dco.
+ */
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_fixed_pll_dco.hw
+ },
+ .num_parents = 1,
+ /*
+ * This clock won't ever change at runtime so
+ * CLK_SET_RATE_PARENT is not required
+ */
+ },
+};
+
+static struct clk_fixed_factor s4_fclk_div2_div = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_fclk_div2 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL1,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2",
+ /*
+ * This clock is a fixed value (1GHz) that is initialized by ROMcode.
+ * For more information, please refer to s4_fixed_pll_dco.
+ */
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_fclk_div2_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor s4_fclk_div3_div = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_fclk_div3 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL1,
+ .bit_idx = 20,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3",
+ /*
+ * For more information, please refer to s4_fixed_pll_dco.
+ */
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_fclk_div3_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor s4_fclk_div4_div = {
+ .mult = 1,
+ .div = 4,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div4_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_fclk_div4 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL1,
+ .bit_idx = 21,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div4",
+ /*
+ * For more information, please refer to s4_fixed_pll_dco.
+ */
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_fclk_div4_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor s4_fclk_div5_div = {
+ .mult = 1,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div5_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_fclk_div5 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL1,
+ .bit_idx = 22,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div5",
+ /*
+ * For more information, please refer to s4_fixed_pll_dco.
+ */
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_fclk_div5_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor s4_fclk_div7_div = {
+ .mult = 1,
+ .div = 7,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div7_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_fclk_div7 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL1,
+ .bit_idx = 23,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div7",
+ /*
+ * For more information, please refer to s4_fixed_pll_dco.
+ */
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_fclk_div7_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor s4_fclk_div2p5_div = {
+ .mult = 2,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2p5_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_fixed_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_fclk_div2p5 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_FIXPLL_CTRL1,
+ .bit_idx = 25,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2p5",
+ /*
+ * For more information, please refer to s4_fixed_pll_dco.
+ */
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_fclk_div2p5_div.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static const struct pll_mult_range s4_gp0_pll_mult_range = {
+ .min = 125,
+ .max = 250,
+};
+
+/*
+ * Internal gp0 pll emulation configuration parameters
+ */
+static const struct reg_sequence s4_gp0_init_regs[] = {
+ { .reg = ANACTRL_GP0PLL_CTRL1, .def = 0x00000000 },
+ { .reg = ANACTRL_GP0PLL_CTRL2, .def = 0x00000000 },
+ { .reg = ANACTRL_GP0PLL_CTRL3, .def = 0x48681c00 },
+ { .reg = ANACTRL_GP0PLL_CTRL4, .def = 0x88770290 },
+ { .reg = ANACTRL_GP0PLL_CTRL5, .def = 0x39272000 },
+ { .reg = ANACTRL_GP0PLL_CTRL6, .def = 0x56540000 }
+};
+
+static struct clk_regmap s4_gp0_pll_dco = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = ANACTRL_GP0PLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_GP0PLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = ANACTRL_GP0PLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = ANACTRL_GP0PLL_CTRL1,
+ .shift = 0,
+ .width = 17,
+ },
+ .l = {
+ .reg_off = ANACTRL_GP0PLL_CTRL0,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = ANACTRL_GP0PLL_CTRL0,
+ .shift = 29,
+ .width = 1,
+ },
+ .range = &s4_gp0_pll_mult_range,
+ .init_regs = s4_gp0_init_regs,
+ .init_count = ARRAY_SIZE(s4_gp0_init_regs),
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "gp0_pll_dco",
+ .ops = &meson_clk_pll_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", }
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_gp0_pll = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = ANACTRL_GP0PLL_CTRL0,
+ .shift = 16,
+ .width = 3,
+ .flags = (CLK_DIVIDER_POWER_OF_TWO |
+ CLK_DIVIDER_ROUND_CLOSEST),
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "gp0_pll",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_gp0_pll_dco.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/*
+ * Internal hifi pll emulation configuration parameters
+ */
+static const struct reg_sequence s4_hifi_init_regs[] = {
+ { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x00010e56 },
+ { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00000000 },
+ { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x6a285c00 },
+ { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x65771290 },
+ { .reg = ANACTRL_HIFIPLL_CTRL5, .def = 0x39272000 },
+ { .reg = ANACTRL_HIFIPLL_CTRL6, .def = 0x56540000 }
+};
+
+static struct clk_regmap s4_hifi_pll_dco = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL1,
+ .shift = 0,
+ .width = 17,
+ },
+ .l = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 29,
+ .width = 1,
+ },
+ .range = &s4_gp0_pll_mult_range,
+ .init_regs = s4_hifi_init_regs,
+ .init_count = ARRAY_SIZE(s4_hifi_init_regs),
+ .flags = CLK_MESON_PLL_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hifi_pll_dco",
+ .ops = &meson_clk_pll_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", }
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_hifi_pll = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 16,
+ .width = 2,
+ .flags = (CLK_DIVIDER_POWER_OF_TWO |
+ CLK_DIVIDER_ROUND_CLOSEST),
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hifi_pll",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_hifi_pll_dco.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_hdmi_pll_dco = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = ANACTRL_HDMIPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_HDMIPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = ANACTRL_HDMIPLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = ANACTRL_HDMIPLL_CTRL1,
+ .shift = 0,
+ .width = 17,
+ },
+ .l = {
+ .reg_off = ANACTRL_HDMIPLL_CTRL0,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = ANACTRL_HDMIPLL_CTRL0,
+ .shift = 29,
+ .width = 1,
+ },
+ .range = &s4_gp0_pll_mult_range,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hdmi_pll_dco",
+ .ops = &meson_clk_pll_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", }
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_hdmi_pll_od = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = ANACTRL_HDMIPLL_CTRL0,
+ .shift = 16,
+ .width = 4,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hdmi_pll_od",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_hdmi_pll_dco.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap s4_hdmi_pll = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = ANACTRL_HDMIPLL_CTRL0,
+ .shift = 20,
+ .width = 2,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "hdmi_pll",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_hdmi_pll_od.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_fixed_factor s4_mpll_50m_div = {
+ .mult = 1,
+ .div = 80,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll_50m_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_fixed_pll_dco.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_mpll_50m = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = ANACTRL_FIXPLL_CTRL3,
+ .mask = 0x1,
+ .shift = 5,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll_50m",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", },
+ { .hw = &s4_mpll_50m_div.hw },
+ },
+ .num_parents = 2,
+ },
+};
+
+static struct clk_fixed_factor s4_mpll_prediv = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll_prediv",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_fixed_pll_dco.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static const struct reg_sequence s4_mpll0_init_regs[] = {
+ { .reg = ANACTRL_MPLL_CTRL2, .def = 0x40000033 }
+};
+
+static struct clk_regmap s4_mpll0_div = {
+ .data = &(struct meson_clk_mpll_data){
+ .sdm = {
+ .reg_off = ANACTRL_MPLL_CTRL1,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = ANACTRL_MPLL_CTRL1,
+ .shift = 30,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = ANACTRL_MPLL_CTRL1,
+ .shift = 20,
+ .width = 9,
+ },
+ .ssen = {
+ .reg_off = ANACTRL_MPLL_CTRL1,
+ .shift = 29,
+ .width = 1,
+ },
+ .lock = &meson_clk_lock,
+ .init_regs = s4_mpll0_init_regs,
+ .init_count = ARRAY_SIZE(s4_mpll0_init_regs),
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll0_div",
+ .ops = &meson_clk_mpll_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_mpll_prediv.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_mpll0 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_MPLL_CTRL1,
+ .bit_idx = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_mpll0_div.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct reg_sequence s4_mpll1_init_regs[] = {
+ { .reg = ANACTRL_MPLL_CTRL4, .def = 0x40000033 }
+};
+
+static struct clk_regmap s4_mpll1_div = {
+ .data = &(struct meson_clk_mpll_data){
+ .sdm = {
+ .reg_off = ANACTRL_MPLL_CTRL3,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = ANACTRL_MPLL_CTRL3,
+ .shift = 30,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = ANACTRL_MPLL_CTRL3,
+ .shift = 20,
+ .width = 9,
+ },
+ .ssen = {
+ .reg_off = ANACTRL_MPLL_CTRL3,
+ .shift = 29,
+ .width = 1,
+ },
+ .lock = &meson_clk_lock,
+ .init_regs = s4_mpll1_init_regs,
+ .init_count = ARRAY_SIZE(s4_mpll1_init_regs),
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll1_div",
+ .ops = &meson_clk_mpll_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_mpll_prediv.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_mpll1 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_MPLL_CTRL3,
+ .bit_idx = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll1",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_mpll1_div.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct reg_sequence s4_mpll2_init_regs[] = {
+ { .reg = ANACTRL_MPLL_CTRL6, .def = 0x40000033 }
+};
+
+static struct clk_regmap s4_mpll2_div = {
+ .data = &(struct meson_clk_mpll_data){
+ .sdm = {
+ .reg_off = ANACTRL_MPLL_CTRL5,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = ANACTRL_MPLL_CTRL5,
+ .shift = 30,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = ANACTRL_MPLL_CTRL5,
+ .shift = 20,
+ .width = 9,
+ },
+ .ssen = {
+ .reg_off = ANACTRL_MPLL_CTRL5,
+ .shift = 29,
+ .width = 1,
+ },
+ .lock = &meson_clk_lock,
+ .init_regs = s4_mpll2_init_regs,
+ .init_count = ARRAY_SIZE(s4_mpll2_init_regs),
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll2_div",
+ .ops = &meson_clk_mpll_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_mpll_prediv.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_mpll2 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_MPLL_CTRL5,
+ .bit_idx = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll2",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_mpll2_div.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct reg_sequence s4_mpll3_init_regs[] = {
+ { .reg = ANACTRL_MPLL_CTRL8, .def = 0x40000033 }
+};
+
+static struct clk_regmap s4_mpll3_div = {
+ .data = &(struct meson_clk_mpll_data){
+ .sdm = {
+ .reg_off = ANACTRL_MPLL_CTRL7,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = ANACTRL_MPLL_CTRL7,
+ .shift = 30,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = ANACTRL_MPLL_CTRL7,
+ .shift = 20,
+ .width = 9,
+ },
+ .ssen = {
+ .reg_off = ANACTRL_MPLL_CTRL7,
+ .shift = 29,
+ .width = 1,
+ },
+ .lock = &meson_clk_lock,
+ .init_regs = s4_mpll3_init_regs,
+ .init_count = ARRAY_SIZE(s4_mpll3_init_regs),
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll3_div",
+ .ops = &meson_clk_mpll_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &s4_mpll_prediv.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap s4_mpll3 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_MPLL_CTRL7,
+ .bit_idx = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll3",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &s4_mpll3_div.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* Array of all clocks provided by this provider */
+static struct clk_hw_onecell_data s4_pll_hw_onecell_data = {
+ .hws = {
+ [CLKID_FIXED_PLL_DCO] = &s4_fixed_pll_dco.hw,
+ [CLKID_FIXED_PLL] = &s4_fixed_pll.hw,
+ [CLKID_FCLK_DIV2_DIV] = &s4_fclk_div2_div.hw,
+ [CLKID_FCLK_DIV2] = &s4_fclk_div2.hw,
+ [CLKID_FCLK_DIV3_DIV] = &s4_fclk_div3_div.hw,
+ [CLKID_FCLK_DIV3] = &s4_fclk_div3.hw,
+ [CLKID_FCLK_DIV4_DIV] = &s4_fclk_div4_div.hw,
+ [CLKID_FCLK_DIV4] = &s4_fclk_div4.hw,
+ [CLKID_FCLK_DIV5_DIV] = &s4_fclk_div5_div.hw,
+ [CLKID_FCLK_DIV5] = &s4_fclk_div5.hw,
+ [CLKID_FCLK_DIV7_DIV] = &s4_fclk_div7_div.hw,
+ [CLKID_FCLK_DIV7] = &s4_fclk_div7.hw,
+ [CLKID_FCLK_DIV2P5_DIV] = &s4_fclk_div2p5_div.hw,
+ [CLKID_FCLK_DIV2P5] = &s4_fclk_div2p5.hw,
+ [CLKID_GP0_PLL_DCO] = &s4_gp0_pll_dco.hw,
+ [CLKID_GP0_PLL] = &s4_gp0_pll.hw,
+ [CLKID_HIFI_PLL_DCO] = &s4_hifi_pll_dco.hw,
+ [CLKID_HIFI_PLL] = &s4_hifi_pll.hw,
+ [CLKID_HDMI_PLL_DCO] = &s4_hdmi_pll_dco.hw,
+ [CLKID_HDMI_PLL_OD] = &s4_hdmi_pll_od.hw,
+ [CLKID_HDMI_PLL] = &s4_hdmi_pll.hw,
+ [CLKID_MPLL_50M_DIV] = &s4_mpll_50m_div.hw,
+ [CLKID_MPLL_50M] = &s4_mpll_50m.hw,
+ [CLKID_MPLL_PREDIV] = &s4_mpll_prediv.hw,
+ [CLKID_MPLL0_DIV] = &s4_mpll0_div.hw,
+ [CLKID_MPLL0] = &s4_mpll0.hw,
+ [CLKID_MPLL1_DIV] = &s4_mpll1_div.hw,
+ [CLKID_MPLL1] = &s4_mpll1.hw,
+ [CLKID_MPLL2_DIV] = &s4_mpll2_div.hw,
+ [CLKID_MPLL2] = &s4_mpll2.hw,
+ [CLKID_MPLL3_DIV] = &s4_mpll3_div.hw,
+ [CLKID_MPLL3] = &s4_mpll3.hw,
+ [NR_PLL_CLKS] = NULL
+ },
+ .num = NR_PLL_CLKS,
+};
+
+static struct clk_regmap *const s4_pll_clk_regmaps[] = {
+ &s4_fixed_pll_dco,
+ &s4_fixed_pll,
+ &s4_fclk_div2,
+ &s4_fclk_div3,
+ &s4_fclk_div4,
+ &s4_fclk_div5,
+ &s4_fclk_div7,
+ &s4_fclk_div2p5,
+ &s4_gp0_pll_dco,
+ &s4_gp0_pll,
+ &s4_hifi_pll_dco,
+ &s4_hifi_pll,
+ &s4_hdmi_pll_dco,
+ &s4_hdmi_pll_od,
+ &s4_hdmi_pll,
+ &s4_mpll_50m,
+ &s4_mpll0_div,
+ &s4_mpll0,
+ &s4_mpll1_div,
+ &s4_mpll1,
+ &s4_mpll2_div,
+ &s4_mpll2,
+ &s4_mpll3_div,
+ &s4_mpll3,
+};
+
+static const struct reg_sequence s4_init_regs[] = {
+ { .reg = ANACTRL_MPLL_CTRL0, .def = 0x00000543 },
+};
+
+static struct regmap_config clkc_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+static int meson_s4_pll_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ void __iomem *base;
+ int ret, i;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ ret = regmap_multi_reg_write(regmap, s4_init_regs, ARRAY_SIZE(s4_init_regs));
+ if (ret) {
+ dev_err(dev, "Failed to init registers\n");
+ return ret;
+ }
+
+ /* Populate regmap for the regmap backed clocks */
+ for (i = 0; i < ARRAY_SIZE(s4_pll_clk_regmaps); i++)
+ s4_pll_clk_regmaps[i]->map = regmap;
+
+ for (i = 0; i < s4_pll_hw_onecell_data.num; i++) {
+ /* array might be sparse */
+ if (!s4_pll_hw_onecell_data.hws[i])
+ continue;
+
+ ret = devm_clk_hw_register(dev, s4_pll_hw_onecell_data.hws[i]);
+ if (ret) {
+ dev_err(dev, "Clock registration failed\n");
+ return ret;
+ }
+ }
+
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ &s4_pll_hw_onecell_data);
+}
+
+static const struct of_device_id clkc_match_table[] = {
+ {
+ .compatible = "amlogic,s4-pll-clkc",
+ },
+ {}
+};
+
+static struct platform_driver s4_driver = {
+ .probe = meson_s4_pll_probe,
+ .driver = {
+ .name = "s4-pll-clkc",
+ .of_match_table = clkc_match_table,
+ },
+};
+
+module_platform_driver(s4_driver);
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/s4-pll.h b/drivers/clk/meson/s4-pll.h
new file mode 100644
index 000000000000..021d9f8b2b30
--- /dev/null
+++ b/drivers/clk/meson/s4-pll.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2021 Amlogic, inc.
+ * Author: Yu Tu <yu.tu at amlogic.com>
+ */
+
+#ifndef __MESON_S4_PLL_H__
+#define __MESON_S4_PLL_H__
+
+/* ANA_CTRL - Registers */
+
+#define ANACTRL_FIXPLL_CTRL0 0x040
+#define ANACTRL_FIXPLL_CTRL1 0x044
+#define ANACTRL_FIXPLL_CTRL2 0x048
+#define ANACTRL_FIXPLL_CTRL3 0x04c
+#define ANACTRL_FIXPLL_CTRL4 0x050
+#define ANACTRL_FIXPLL_CTRL5 0x054
+#define ANACTRL_FIXPLL_CTRL6 0x058
+#define ANACTRL_FIXPLL_STS 0x05c
+#define ANACTRL_GP0PLL_CTRL0 0x080
+#define ANACTRL_GP0PLL_CTRL1 0x084
+#define ANACTRL_GP0PLL_CTRL2 0x088
+#define ANACTRL_GP0PLL_CTRL3 0x08c
+#define ANACTRL_GP0PLL_CTRL4 0x090
+#define ANACTRL_GP0PLL_CTRL5 0x094
+#define ANACTRL_GP0PLL_CTRL6 0x098
+#define ANACTRL_GP0PLL_STS 0x09c
+#define ANACTRL_HIFIPLL_CTRL0 0x100
+#define ANACTRL_HIFIPLL_CTRL1 0x104
+#define ANACTRL_HIFIPLL_CTRL2 0x108
+#define ANACTRL_HIFIPLL_CTRL3 0x10c
+#define ANACTRL_HIFIPLL_CTRL4 0x110
+#define ANACTRL_HIFIPLL_CTRL5 0x114
+#define ANACTRL_HIFIPLL_CTRL6 0x118
+#define ANACTRL_HIFIPLL_STS 0x11c
+#define ANACTRL_MPLL_CTRL0 0x180
+#define ANACTRL_MPLL_CTRL1 0x184
+#define ANACTRL_MPLL_CTRL2 0x188
+#define ANACTRL_MPLL_CTRL3 0x18c
+#define ANACTRL_MPLL_CTRL4 0x190
+#define ANACTRL_MPLL_CTRL5 0x194
+#define ANACTRL_MPLL_CTRL6 0x198
+#define ANACTRL_MPLL_CTRL7 0x19c
+#define ANACTRL_MPLL_CTRL8 0x1a0
+#define ANACTRL_MPLL_STS 0x1a4
+#define ANACTRL_HDMIPLL_CTRL0 0x1c0
+#define ANACTRL_HDMIPLL_CTRL1 0x1c4
+#define ANACTRL_HDMIPLL_CTRL2 0x1c8
+#define ANACTRL_HDMIPLL_CTRL3 0x1cc
+#define ANACTRL_HDMIPLL_CTRL4 0x1d0
+#define ANACTRL_HDMIPLL_CTRL5 0x1d4
+#define ANACTRL_HDMIPLL_CTRL6 0x1d8
+#define ANACTRL_HDMIPLL_STS 0x1dc
+#define ANACTRL_HDMIPLL_VLOCK 0x1e4
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/amlogic,s4-pll-clkc.h. Only the clocks ids we don't
+ * want to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_FIXED_PLL_DCO 0
+#define CLKID_FCLK_DIV2_DIV 2
+#define CLKID_FCLK_DIV3_DIV 4
+#define CLKID_FCLK_DIV4_DIV 6
+#define CLKID_FCLK_DIV5_DIV 8
+#define CLKID_FCLK_DIV7_DIV 10
+#define CLKID_FCLK_DIV2P5_DIV 12
+#define CLKID_GP0_PLL_DCO 14
+#define CLKID_HIFI_PLL_DCO 16
+#define CLKID_HDMI_PLL_DCO 18
+#define CLKID_HDMI_PLL_OD 19
+#define CLKID_MPLL_50M_DIV 21
+#define CLKID_MPLL_PREDIV 23
+#define CLKID_MPLL0_DIV 24
+#define CLKID_MPLL1_DIV 26
+#define CLKID_MPLL2_DIV 28
+#define CLKID_MPLL3_DIV 30
+
+#define NR_PLL_CLKS 32
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
+
+#endif /* __MESON_S4_PLL_H__ */
--
2.33.1
More information about the linux-arm-kernel
mailing list