[PATCH 1/2] ARM: dts: BCM5301X: Relicense Hauke's code to the GPL 2.0+ / MIT
Rafał Miłecki
zajec5 at gmail.com
Mon May 15 08:19:20 PDT 2023
From: Rafał Miłecki <rafal at milecki.pl>
Move code added by Hauke to the bcm-ns.dtsi which uses dual licensing.
That syncs more Northstar code to be based on the same licensing schema.
Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
Cc: Hauke Mehrtens <hauke at hauke-m.de>
---
arch/arm/boot/dts/bcm-ns.dtsi | 90 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm5301x.dtsi | 85 -------------------------------
2 files changed, 90 insertions(+), 85 deletions(-)
diff --git a/arch/arm/boot/dts/bcm-ns.dtsi b/arch/arm/boot/dts/bcm-ns.dtsi
index cc977bbc142b..58c30e3a142f 100644
--- a/arch/arm/boot/dts/bcm-ns.dtsi
+++ b/arch/arm/boot/dts/bcm-ns.dtsi
@@ -1,4 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2013-2014 Hauke Mehrtens <hauke at hauke-m.de>
+ */
#include <dt-bindings/clock/bcm-nsp.h>
#include <dt-bindings/gpio/gpio.h>
@@ -7,6 +10,81 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chipcommon-a-bus at 18000000 {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x18000000 0x00001000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: serial at 300 {
+ compatible = "ns16550";
+ reg = <0x0300 0x100>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>;
+ status = "disabled";
+ };
+
+ uart1: serial at 400 {
+ compatible = "ns16550";
+ reg = <0x0400 0x100>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_uart1>;
+ status = "disabled";
+ };
+ };
+
+ mpcore-bus at 19000000 {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x19000000 0x00023000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scu at 20000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x20000 0x100>;
+ };
+
+ timer at 20200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x20200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&periph_clk>;
+ };
+
+ timer at 20600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x20600 0x20>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_EDGE_RISING)>;
+ clocks = <&periph_clk>;
+ };
+
+ gic: interrupt-controller at 21000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x21000 0x1000>,
+ <0x20100 0x100>;
+ };
+
+ L2: cache-controller at 22000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x22000 0x1000>;
+ cache-unified;
+ arm,shared-override;
+ prefetch-data = <1>;
+ prefetch-instr = <1>;
+ cache-level = <2>;
+ };
+ };
+
axi at 18000000 {
compatible = "brcm,bus-axi";
reg = <0x18000000 0x1000>;
@@ -216,6 +294,18 @@ thermal: thermal at 2c0 {
};
};
+ nand_controller: nand-controller at 18028000 {
+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
+ reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
+ reg-names = "nand", "iproc-idm", "iproc-ext";
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brcm,nand-has-wp;
+ };
+
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index bc36edc24510..d6c31ead0398 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -11,41 +11,7 @@
#include "bcm-ns.dtsi"
/ {
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&gic>;
-
- chipcommon-a-bus at 18000000 {
- compatible = "simple-bus";
- ranges = <0x00000000 0x18000000 0x00001000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- uart0: serial at 300 {
- compatible = "ns16550";
- reg = <0x0300 0x100>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&iprocslow>;
- status = "disabled";
- };
-
- uart1: serial at 400 {
- compatible = "ns16550";
- reg = <0x0400 0x100>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&iprocslow>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinmux_uart1>;
- status = "disabled";
- };
- };
-
mpcore-bus at 19000000 {
- compatible = "simple-bus";
- ranges = <0x00000000 0x19000000 0x00023000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
a9pll: arm_clk at 0 {
#clock-cells = <0>;
compatible = "brcm,nsp-armpll";
@@ -53,26 +19,6 @@ a9pll: arm_clk at 0 {
reg = <0x00000 0x1000>;
};
- scu at 20000 {
- compatible = "arm,cortex-a9-scu";
- reg = <0x20000 0x100>;
- };
-
- timer at 20200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x20200 0x100>;
- interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
- clocks = <&periph_clk>;
- };
-
- timer at 20600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x20600 0x20>;
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_EDGE_RISING)>;
- clocks = <&periph_clk>;
- };
-
watchdog at 20620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0x20620 0x20>;
@@ -80,25 +26,6 @@ watchdog at 20620 {
IRQ_TYPE_EDGE_RISING)>;
clocks = <&periph_clk>;
};
-
- gic: interrupt-controller at 21000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x21000 0x1000>,
- <0x20100 0x100>;
- };
-
- L2: cache-controller at 22000 {
- compatible = "arm,pl310-cache";
- reg = <0x22000 0x1000>;
- cache-unified;
- arm,shared-override;
- prefetch-data = <1>;
- prefetch-instr = <1>;
- cache-level = <2>;
- };
};
pmu {
@@ -301,18 +228,6 @@ genpll: clock-controller at 140 {
};
};
- nand_controller: nand-controller at 18028000 {
- compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
- reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
- reg-names = "nand", "iproc-idm", "iproc-ext";
- interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- brcm,nand-has-wp;
- };
-
spi at 18029200 {
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
reg = <0x18029200 0x184>,
--
2.35.3
More information about the linux-arm-kernel
mailing list