[PATCH v4 3/5] mtd: rawnand: meson: always read whole OOB bytes
Arseniy Krasnov
AVKrasnov at sberdevices.ru
Mon May 15 02:44:37 PDT 2023
This changes size of read access to OOB area by reading all bytes of
OOB (free bytes + ECC engine bytes).
Signed-off-by: Arseniy Krasnov <AVKrasnov at sberdevices.ru>
---
drivers/mtd/nand/raw/meson_nand.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 8526a6b87720..a31106c943d7 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -755,6 +755,30 @@ static int __meson_nfc_read_oob(struct nand_chip *nand, int page,
u32 oob_bytes;
u32 page_size;
int ret;
+ int i;
+
+ /* Read ECC codes and user bytes. */
+ for (i = 0; i < nand->ecc.steps; i++) {
+ u32 ecc_offs = nand->ecc.size * (i + 1) +
+ NFC_OOB_PER_ECC(nand) * i;
+
+ ret = nand_read_page_op(nand, page, 0, NULL, 0);
+ if (ret)
+ return ret;
+
+ /* Use temporary buffer, because 'nand_change_read_column_op()'
+ * seems work with some alignment, so we can't read data to
+ * 'oob_buf' directly.
+ */
+ ret = nand_change_read_column_op(nand, ecc_offs, meson_chip->oob_buf,
+ NFC_OOB_PER_ECC(nand), false);
+ if (ret)
+ return ret;
+
+ memcpy(oob_buf + i * NFC_OOB_PER_ECC(nand),
+ meson_chip->oob_buf,
+ NFC_OOB_PER_ECC(nand));
+ }
oob_bytes = meson_nfc_get_oob_bytes(nand);
--
2.35.0
More information about the linux-arm-kernel
mailing list