[PATCH 3/3] arm64: dts: allwinner: h6: tanix-tx6: Add compatible bluetooth

Rudi Heitbaum rudi at heitbaum.com
Sun May 14 00:47:31 PDT 2023


Tanix TX6 comes either with RTL8822BS or RTL8822CS wifi+bt combo module.
Add compatible for RTL8822BS as it uses different firmware.

Signed-off-by: Rudi Heitbaum <rudi at heitbaum.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
index 9a38ff9b3fc7..9460ccbc247d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
@@ -21,7 +21,7 @@ &uart1 {
 	status = "okay";
 
 	bluetooth {
-		compatible = "realtek,rtl8822cs-bt";
+		compatible = "realtek,rtl8822bs-bt", "realtek,rtl8822cs-bt";
 		device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
 		host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
 		enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
-- 
2.25.1




More information about the linux-arm-kernel mailing list