[PATCH v4 04/13] dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Sat May 13 11:32:04 PDT 2023


On 12/05/2023 15:11, Neil Armstrong wrote:
> The Amlogic G12A, G12B & SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a),
> with a custom glue managing the IP resets, clock and data input similar to the DW-HDMI Glue
> on the same Amlogic SoCs.

Please wrap commit message according to Linux coding style / submission
process (neither too early nor over the limit):
https://elixir.bootlin.com/linux/v5.18-rc4/source/Documentation/process/submitting-patches.rst#L586

Subject: drop second/last, redundant "bindings". The "dt-bindings"
prefix is already stating that these are bindings.

> 
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
> ---
>  .../display/amlogic,meson-g12a-dw-mipi-dsi.yaml    | 117 +++++++++++++++++++++
>  1 file changed, 117 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml
> new file mode 100644
> index 000000000000..8169c7e93ff5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml
> @@ -0,0 +1,117 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2020 BayLibre, SAS
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/amlogic,meson-g12a-dw-mipi-dsi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic specific extensions to the Synopsys Designware MIPI DSI Host Controller
> +
> +maintainers:
> +  - Neil Armstrong <neil.armstrong at linaro.org>
> +
> +description: |
> +  The Amlogic Meson Synopsys Designware Integration is composed of
> +  - A Synopsys DesignWare MIPI DSI Host Controller IP
> +  - A TOP control block controlling the Clocks & Resets of the IP
> +
> +allOf:
> +  - $ref: dsi-controller.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - amlogic,meson-g12a-dw-mipi-dsi
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 3

Missing maxItems

> +
> +  clock-names:
> +    minItems: 3
> +    items:
> +      - const: pclk
> +      - const: bit_clk
> +      - const: px_clk
> +      - const: meas_clk

Drop _clk suffixes. pclk can stay, it's a bit odd but recently Rob
clarified that suffix with underscore should not be there.

> +
> +  resets:
> +    minItems: 1

maxItems instead

> +
> +  reset-names:
> +    items:
> +      - const: top
> +
> +  phys:
> +    minItems: 1

Ditto

> +
> +  phy-names:
> +    items:
> +      - const: dphy
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port at 0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Input node to receive pixel data.
> +
> +      port at 1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: DSI output node to panel.
> +
> +    required:
> +      - port at 0
> +      - port at 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - phys
> +  - phy-names
> +  - ports
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    dsi at 7000 {
> +          compatible = "amlogic,meson-g12a-dw-mipi-dsi";
> +          reg = <0x6000 0x400>;

Your reg does not match unit address. The dt_binding_check should
actually complain about it.

Best regards,
Krzysztof




More information about the linux-arm-kernel mailing list