[PATCH v2 5/5] ARM: dts: axp209: Add iio-hwmon node for internal temperature

[Jernej Škrabec]

Dne petek, 12. maj 2023 ob 12:30:32 CEST je Jonathan McDowell napisal(a):
> On Thu, May 11, 2023 at 06:11:49PM +0200, Jernej Škrabec wrote:
> > Dne sreda, 10. maj 2023 ob 14:02:28 CEST je Jonathan McDowell napisal(a):
> > > This adds a DT node to hook up the internal temperature ADC to the
> > > iio-hwmon driver. The various voltage + current ADCs are consumed and
> > > exposed by their respective drivers, but this is not and is always
> > > available. Naming chosen to match the axp20x_ prefix the power sensors
> > > use.
> > 
> > Sorry for maybe obvious thing, but where are other ADC channels exposed?
> 
> In the associated power drivers; e.g. axp20x_ac_power, axp20x_usb_power
> + axp20x_battery. The internal temperature is the only one that
> logically belongs to the chip as a whole rather than one of the
> subfunctions.
> 
> root at chip:~# sensors
> axp20x_battery-isa-0000
> Adapter: ISA adapter
> in0:           0.00 V
> curr1:         0.00 A
> 
> pmic_temp-isa-0000
> Adapter: ISA adapter
> temp1:        +42.5°C
> 
> axp20x_ac-isa-0000
> Adapter: ISA adapter
> in0:           0.00 V
> curr1:         0.00 A
> 
> axp20x_usb-isa-0000
> Adapter: ISA adapter
> in0:           4.93 V  (min =  +4.00 V)
> curr1:       330.00 mA (max =  +0.00 A)

Right.

Reviewed-by: Jernej Skrabec <jernej.skrabec at gmail.com>

Best regards,
Jernej

> 
> > > Signed-off-by: Jonathan McDowell <noodles at earth.li>
> > > ---
> > > 
> > >  arch/arm/boot/dts/axp209.dtsi | 7 +++++++
> > >  1 file changed, 7 insertions(+)
> > > 
> > > diff --git a/arch/arm/boot/dts/axp209.dtsi
> > > b/arch/arm/boot/dts/axp209.dtsi
> > > index ca240cd6f6c3..469d0f7d5185 100644
> > > --- a/arch/arm/boot/dts/axp209.dtsi
> > > +++ b/arch/arm/boot/dts/axp209.dtsi
> > > @@ -48,6 +48,13 @@
> > > 
> > >   * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
> > >   */
> > > 
> > > +/ {
> > > +	pmic-temp {
> > > +		compatible = "iio-hwmon";
> > > +		io-channels = <&axp_adc 4>; /* Internal temperature */
> > > +	};
> > > +};
> > > +
> > > 
> > >  &axp209 {
> > >  
> > >  	compatible = "x-powers,axp209";
> > >  	interrupt-controller;
> 
> J.