[PATCH V2 2/3] nvmem: brcm_nvram: add .read_post_process() for MACs
Srinivas Kandagatla
srinivas.kandagatla at linaro.org
Fri May 12 03:17:51 PDT 2023
On 21/04/2023 09:43, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal at milecki.pl>
>
> 1. Parse ASCII MAC format into byte based
> 2. Calculate relative addresses based on index argument
>
> Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
> ---
Applied thanks,
--srini
> drivers/nvmem/Kconfig | 1 +
> drivers/nvmem/brcm_nvram.c | 28 ++++++++++++++++++++++++++++
> 2 files changed, 29 insertions(+)
>
> diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
> index b291b27048c7..688b70ba4826 100644
> --- a/drivers/nvmem/Kconfig
> +++ b/drivers/nvmem/Kconfig
> @@ -55,6 +55,7 @@ config NVMEM_BRCM_NVRAM
> tristate "Broadcom's NVRAM support"
> depends on ARCH_BCM_5301X || COMPILE_TEST
> depends on HAS_IOMEM
> + select GENERIC_NET_UTILS
> help
> This driver provides support for Broadcom's NVRAM that can be accessed
> using I/O mapping.
> diff --git a/drivers/nvmem/brcm_nvram.c b/drivers/nvmem/brcm_nvram.c
> index 39aa27942f28..4567c597c87f 100644
> --- a/drivers/nvmem/brcm_nvram.c
> +++ b/drivers/nvmem/brcm_nvram.c
> @@ -4,6 +4,8 @@
> */
>
> #include <linux/bcm47xx_nvram.h>
> +#include <linux/etherdevice.h>
> +#include <linux/if_ether.h>
> #include <linux/io.h>
> #include <linux/mod_devicetable.h>
> #include <linux/module.h>
> @@ -42,6 +44,25 @@ static int brcm_nvram_read(void *context, unsigned int offset, void *val,
> return 0;
> }
>
> +static int brcm_nvram_read_post_process_macaddr(void *context, const char *id, int index,
> + unsigned int offset, void *buf, size_t bytes)
> +{
> + u8 mac[ETH_ALEN];
> +
> + if (bytes != 3 * ETH_ALEN - 1)
> + return -EINVAL;
> +
> + if (!mac_pton(buf, mac))
> + return -EINVAL;
> +
> + if (index)
> + eth_addr_add(mac, index);
> +
> + ether_addr_copy(buf, mac);
> +
> + return 0;
> +}
> +
> static int brcm_nvram_add_cells(struct brcm_nvram *priv, uint8_t *data,
> size_t len)
> {
> @@ -75,6 +96,13 @@ static int brcm_nvram_add_cells(struct brcm_nvram *priv, uint8_t *data,
> priv->cells[idx].offset = value - (char *)data;
> priv->cells[idx].bytes = strlen(value);
> priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name);
> + if (!strcmp(var, "et0macaddr") ||
> + !strcmp(var, "et1macaddr") ||
> + !strcmp(var, "et2macaddr")) {
> + priv->cells[idx].raw_len = strlen(value);
> + priv->cells[idx].bytes = ETH_ALEN;
> + priv->cells[idx].read_post_process = brcm_nvram_read_post_process_macaddr;
> + }
> }
>
> return 0;
More information about the linux-arm-kernel
mailing list