[PATCH net-next 3/8] net: phy: realtek: use genphy_soft_reset for 2.5G PHYs

Daniel Golle daniel at makrotopia.org
Wed May 10 15:57:42 PDT 2023


Some vendor bootloaders do weird things with those PHYs which result in
link modes being reported wrongly. Start from a clean sheet by resetting
the PHY.

Reported-by: Yevhen Kolomeiko <jarvis2709 at gmail.com>
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
 drivers/net/phy/realtek.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 4a2c1ad02d48..0cf7846c9812 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -1038,6 +1038,7 @@ static struct phy_driver realtek_drvs[] = {
 		.write_page	= rtl821x_write_page,
 		.read_mmd	= rtl822x_read_mmd,
 		.write_mmd	= rtl822x_write_mmd,
+		.soft_reset     = genphy_soft_reset,
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc840),
 		.name		= "RTL8226B_RTL8221B 2.5Gbps PHY",
@@ -1051,6 +1052,7 @@ static struct phy_driver realtek_drvs[] = {
 		.write_page	= rtl821x_write_page,
 		.read_mmd	= rtl822x_read_mmd,
 		.write_mmd	= rtl822x_write_mmd,
+		.soft_reset     = genphy_soft_reset,
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc838),
 		.name           = "RTL8226-CG 2.5Gbps PHY",
@@ -1061,6 +1063,7 @@ static struct phy_driver realtek_drvs[] = {
 		.resume         = rtlgen_resume,
 		.read_page      = rtl821x_read_page,
 		.write_page     = rtl821x_write_page,
+		.soft_reset     = genphy_soft_reset,
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc848),
 		.name           = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
@@ -1072,6 +1075,7 @@ static struct phy_driver realtek_drvs[] = {
 		.resume         = rtlgen_resume,
 		.read_page      = rtl821x_read_page,
 		.write_page     = rtl821x_write_page,
+		.soft_reset     = genphy_soft_reset,
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc849),
 		.name           = "RTL8221B-VB-CG 2.5Gbps PHY",
@@ -1083,6 +1087,7 @@ static struct phy_driver realtek_drvs[] = {
 		.resume         = rtlgen_resume,
 		.read_page      = rtl821x_read_page,
 		.write_page     = rtl821x_write_page,
+		.soft_reset     = genphy_soft_reset,
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc84a),
 		.name           = "RTL8221B-VM-CG 2.5Gbps PHY",
@@ -1094,6 +1099,7 @@ static struct phy_driver realtek_drvs[] = {
 		.resume         = rtlgen_resume,
 		.read_page      = rtl821x_read_page,
 		.write_page     = rtl821x_write_page,
+		.soft_reset     = genphy_soft_reset,
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc961),
 		.name		= "RTL8366RB Gigabit Ethernet",
-- 
2.40.0




More information about the linux-arm-kernel mailing list