[PATCH v3 1/2] phy: cadence: salvo: Add cdns,usb2-disconnect-threshold-microvolt property

Frank Li Frank.Li at nxp.com
Wed May 10 07:05:03 PDT 2023


Add cdns,usb2-disconnect-threshold-microvolt property to address fake USB
disconnection issue during enumeration or suspend state for difference
platform.

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
Change from v2 to v3
- add cdns prefix
Change from v1 to v2
- remove empty change before #include 
- Remove dts change from patch

 drivers/phy/cadence/phy-cadence-salvo.c | 29 +++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/phy/cadence/phy-cadence-salvo.c b/drivers/phy/cadence/phy-cadence-salvo.c
index 23be27a747a9..ab7eca515059 100644
--- a/drivers/phy/cadence/phy-cadence-salvo.c
+++ b/drivers/phy/cadence/phy-cadence-salvo.c
@@ -6,6 +6,7 @@
  * Copyright (c) 2019-2020 NXP
  */
 
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -91,9 +92,19 @@
 
 /* USB2 PHY register definition */
 #define UTMI_REG15				0xaf
+#define UTMI_AFE_RX_REG0			0x0d
 #define UTMI_AFE_RX_REG5			0x12
 #define UTMI_AFE_BC_REG4			0x29
 
+/* Align UTMI_AFE_RX_REG0 bit[7:6] define */
+enum usb2_disconn_threshold {
+	USB2_DISCONN_THRESHOLD_575 = 0x0,
+	USB2_DISCONN_THRESHOLD_610 = 0x1,
+	USB2_DISCONN_THRESHOLD_645 = 0x3,
+};
+
+#define RX_USB2_DISCONN_MASK			GENMASK(7, 6)
+
 /* TB_ADDR_TX_RCVDETSC_CTRL */
 #define RXDET_IN_P3_32KHZ			BIT(0)
 /*
@@ -125,6 +136,7 @@ struct cdns_salvo_phy {
 	struct clk *clk;
 	void __iomem *base;
 	struct cdns_salvo_data *data;
+	enum usb2_disconn_threshold usb2_disconn;
 };
 
 static const struct of_device_id cdns_salvo_phy_of_match[];
@@ -261,6 +273,12 @@ static int cdns_salvo_phy_init(struct phy *phy)
 
 	cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_RX_REG5,
 			 0x5);
+
+	value = cdns_salvo_read(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_RX_REG0);
+	value &= ~RX_USB2_DISCONN_MASK;
+	value = FIELD_PREP(RX_USB2_DISCONN_MASK, salvo_phy->usb2_disconn);
+	cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_RX_REG0, value);
+
 	udelay(10);
 
 	clk_disable_unprepare(salvo_phy->clk);
@@ -315,6 +333,7 @@ static int cdns_salvo_phy_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct cdns_salvo_phy *salvo_phy;
 	struct cdns_salvo_data *data;
+	u32 val;
 
 	data = (struct cdns_salvo_data *)of_device_get_match_data(dev);
 	salvo_phy = devm_kzalloc(dev, sizeof(*salvo_phy), GFP_KERNEL);
@@ -326,6 +345,16 @@ static int cdns_salvo_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(salvo_phy->clk))
 		return PTR_ERR(salvo_phy->clk);
 
+	if (of_property_read_u32(dev->of_node, "cdns,usb2-disconnect-threshold-microvolt", &val))
+		val = 575;
+
+	if (val < 610)
+		salvo_phy->usb2_disconn = USB2_DISCONN_THRESHOLD_575;
+	else if (val < 645)
+		salvo_phy->usb2_disconn = USB2_DISCONN_THRESHOLD_610;
+	else
+		salvo_phy->usb2_disconn = USB2_DISCONN_THRESHOLD_645;
+
 	salvo_phy->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(salvo_phy->base))
 		return PTR_ERR(salvo_phy->base);
-- 
2.34.1




More information about the linux-arm-kernel mailing list