[PATCH 2/2] arm64: dts: ti: k3-am62-main: add sa3_secproxy in cbass_main

[Nitin Yadav]

Add sa3_secproxy node in k3-am62-main.dtsi to keep device tree
nodes in sync with u-boot nodes.

Signed-off-by: Nitin Yadav <n-yadav at ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index b3e4857bbbe4..7c2af5b0e022 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -42,6 +42,15 @@ gic_its: msi-controller at 1820000 {
 		};
 	};
 
+	sa3_secproxy: secproxy at 44880000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "rt", "scfg", "target_data";
+		reg = <0x00 0x44880000 0x00 0x20000>,
+		      <0x0 0x44860000 0x0 0x20000>,
+		      <0x0 0x43600000 0x0 0x10000>;
+	};
+
 	main_conf: syscon at 100000 {
 		compatible = "syscon", "simple-mfd";
 		reg = <0x00 0x00100000 0x00 0x20000>;
-- 
2.25.1