[PATCH v2 4/5] ARM: dts: sun5i: Add port E pinmux settings for mmc2

[Jonathan McDowell]

These alternate pins for mmc2 are brought out to the 40 pin U14 header
on the C.H.I.P and can be used to add an external MMC device with a 4
bit interface. See

https://byteporter.com/ntc-chip-micro-sd-slot/

for further details on how.

Signed-off-by: Jonathan McDowell <noodles at earth.li>
---
 arch/arm/boot/dts/sun5i.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 250d6b87ab4d..ab7f675aeec4 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -517,6 +517,15 @@ mmc2_4bit_pc_pins: mmc2-4bit-pc-pins {
 				bias-pull-up;
 			};
 
+			/omit-if-no-ref/
+			mmc2_4bit_pe_pins: mmc2-4bit-pe-pins {
+				pins = "PE4", "PE5", "PE6", "PE7",
+				       "PE8", "PE9";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
 			mmc2_8bit_pins: mmc2-8bit-pins {
 				pins = "PC6", "PC7", "PC8", "PC9",
 				       "PC10", "PC11", "PC12", "PC13",
-- 
2.39.2