[PATCH V6 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
Souradeep Chowdhury
quic_schowdhu at quicinc.com
Tue May 9 05:26:56 PDT 2023
On 5/9/2023 5:09 PM, Dmitry Baryshkov wrote:
> On Tue, 9 May 2023 at 13:53, Souradeep Chowdhury
> <quic_schowdhu at quicinc.com> wrote:
>>
>> All of Qualcomm's proprietary Android boot-loaders capture boot time
>> stats, like the time when the bootloader started execution and at what
>> point the bootloader handed over control to the kernel etc. in the IMEM
>> region. This information is captured in a specific format by this driver
>> by mapping a structure to the IMEM memory region and then accessing the
>> members of the structure to show the information within debugfs file.
>> This information is useful in verifying if the existing boot KPIs have
>> regressed or not. The information is shown in milliseconds, a sample
>> log from sm8450(waipio) device is as follows:-
>>
>> /sys/kernel/debug/qcom_boot_stats # cat abl_time
>> 17898 ms
>> /sys/kernel/debug/qcom_boot_stats # cat pre_abl_time
>> 2879 ms
>>
>> The Module Power Manager(MPM) sleep counter starts ticking at the PBL
>> stage and the timestamp generated by the sleep counter is logged by
>> the Qualcomm proprietary bootloader(ABL) at two points-> First when it
>> starts execution which is logged here as "pre_abl_time" and the second
>> when it is about to load the kernel logged as "abl_time". Documentation
>> details are also added in Documentation/ABI/testing/debugfs-driver-bootstat
>>
>> Signed-off-by: Souradeep Chowdhury <quic_schowdhu at quicinc.com>
>> ---
>> .../ABI/testing/debugfs-driver-bootstat | 17 +++
>> drivers/soc/qcom/Kconfig | 10 ++
>> drivers/soc/qcom/Makefile | 1 +
>> drivers/soc/qcom/boot_stats.c | 100 ++++++++++++++++++
>> 4 files changed, 128 insertions(+)
>> create mode 100644 Documentation/ABI/testing/debugfs-driver-bootstat
>> create mode 100644 drivers/soc/qcom/boot_stats.c
>>
>> diff --git a/Documentation/ABI/testing/debugfs-driver-bootstat b/Documentation/ABI/testing/debugfs-driver-bootstat
>> new file mode 100644
>> index 000000000000..7127d15d9f15
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/debugfs-driver-bootstat
>> @@ -0,0 +1,17 @@
>> +What: /sys/kernel/debug/qcom_boot_stats/pre_abl_time
>
> Could you please change these bindings to be generic?
>
> s/qcom_boot_stats/boot_stats/
> s/pre_abl_time/pre_bootloader_msec/
> s/abl_time/bootloader_msec/
>
> This way other platforms might also use the same file structure.
Ack
>
>> +Date: May 2023
>> +Contact: Souradeep Chowdhury <quic_schowdhu at quicinc.com>
>> +Description:
>> + This file is used to read the KPI value pre abl time.
>> + It shows the time in milliseconds from the starting
>> + point of PBL to the point when the control shifted
>> + to ABL(Qualcomm proprietary bootloader).
>> +
>> +What: /sys/kernel/debug/qcom_boot_stats/abl_time
>> +Date: May 2023
>> +Contact: Souradeep Chowdhury <quic_schowdhu at quicinc.com>
>> +Description:
>> + This file is used to read the KPI value abl time.
>> + It show the duration in milliseconds from the
>> + time control switched to ABL to the point when
>> + the linux kernel started getting loaded.
>> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
>> index a491718f8064..04141236dcdd 100644
>> --- a/drivers/soc/qcom/Kconfig
>> +++ b/drivers/soc/qcom/Kconfig
>> @@ -16,6 +16,16 @@ config QCOM_AOSS_QMP
>> subsystems as well as controlling the debug clocks exposed by the Always On
>> Subsystem (AOSS) using Qualcomm Messaging Protocol (QMP).
>>
>> +config QCOM_BOOTSTAT
>> + tristate "Qualcomm Technologies, Boot Stat driver"
>> + depends on ARCH_QCOM || COMPILE_TEST
>> + depends on DEBUG_FS
>> + help
>> + This option enables driver support for boot stats. Boot stat driver logs
>> + the kernel bootloader information by accessing the imem region. These
>> + information are exposed in the form of debugfs files. This is used to
>> + determine if there is any regression in boot timings.
>> +
>> config QCOM_COMMAND_DB
>> tristate "Qualcomm Command DB"
>> depends on ARCH_QCOM || COMPILE_TEST
>> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
>> index 0f43a88b4894..ae7bda96a539 100644
>> --- a/drivers/soc/qcom/Makefile
>> +++ b/drivers/soc/qcom/Makefile
>> @@ -1,6 +1,7 @@
>> # SPDX-License-Identifier: GPL-2.0
>> CFLAGS_rpmh-rsc.o := -I$(src)
>> obj-$(CONFIG_QCOM_AOSS_QMP) += qcom_aoss.o
>> +obj-$(CONFIG_QCOM_BOOTSTAT) += boot_stats.o
>> obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o
>> obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
>> obj-$(CONFIG_QCOM_CPR) += cpr.o
>> diff --git a/drivers/soc/qcom/boot_stats.c b/drivers/soc/qcom/boot_stats.c
>> new file mode 100644
>> index 000000000000..ca67b6b5d8eb
>> --- /dev/null
>> +++ b/drivers/soc/qcom/boot_stats.c
>> @@ -0,0 +1,100 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2013-2019, 2021 The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <linux/debugfs.h>
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/init.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/platform_device.h>
>> +
>> +#define TO_MS(timestamp) ((timestamp * 1000) / 32768)
>
> Quoting v4 question, which got no answer:
>
> Some of the platforms DTs define 32KHz clock instead of 32.768 KHz
> What should be the divisor in this case?
This is the standard divisor used to calculate the pre_abl and abl times
across most QCOM SoCs. Can you give an example where the sleep_stat
counter has a different frequency?
>
>> +
>> +/**
>> + * struct boot_stats - timestamp information related to boot stats
>> + * @abl_start: Time for the starting point of the abl
>> + * @abl_end: Time when the kernel starts loading from abl
>> + */
>> +struct boot_stats {
>> + u32 abl_start;
>> + u32 abl_end;
>> +} __packed;
>> +
>> +struct bs_data {
>> + struct boot_stats __iomem *b_stats;
>> + struct dentry *dbg_dir;
>> +};
>> +
>> +static void populate_boot_stats(char *abl_str, char *pre_abl_str, struct bs_data *drvdata)
>> +{
>> + u32 abl_time, pre_abl_time;
>> +
>> + abl_time = TO_MS(drvdata->b_stats->abl_end) - TO_MS(drvdata->b_stats->abl_start);
>> + sprintf(abl_str, "%u ms", abl_time);
>> +
>> + pre_abl_time = TO_MS(drvdata->b_stats->abl_start);
>> + sprintf(pre_abl_str, "%u ms", pre_abl_time);
>
> Another point from v4:
>
> It would be better to move the unit to the file name and include just
> the number.
Clarified from your first comment
>
>> +}
>> +
>> +static int boot_stats_probe(struct platform_device *pdev)
>> +{
>> + char abl_str[20], pre_abl_str[20], *abl, *pre_abl;
>> + struct device *bootstat_dev = &pdev->dev;
>> + struct bs_data *drvdata;
>> +
>> + drvdata = devm_kzalloc(bootstat_dev, sizeof(*drvdata), GFP_KERNEL);
>> + if (!drvdata)
>> + return dev_err_probe(bootstat_dev, -ENOMEM, "failed to allocate memory");
>> + platform_set_drvdata(pdev, drvdata);
>> +
>> + drvdata->b_stats = devm_of_iomap(bootstat_dev, bootstat_dev->of_node, 0, NULL);
>> + if (IS_ERR(drvdata->b_stats))
>> + return dev_err_probe(bootstat_dev, PTR_ERR(drvdata->b_stats),
>> + "failed to map imem region");
>> +
>> + drvdata->dbg_dir = debugfs_create_dir("qcom_boot_stats", NULL);
>> + if (IS_ERR(drvdata->dbg_dir))
>> + return dev_err_probe(bootstat_dev, PTR_ERR(drvdata->dbg_dir),
>> + "failed to create debugfs directory");
>> +
>> + populate_boot_stats(abl_str, pre_abl_str, drvdata);
>> + abl = abl_str;
>> + pre_abl = pre_abl_str;
>> +
>> + debugfs_create_str("pre_abl_time", 0400, drvdata->dbg_dir, (char **)&pre_abl);
>> + debugfs_create_str("abl_time", 0400, drvdata->dbg_dir, (char **)&abl);
>> +
>> + return 0;
>> +}
>> +
>> +void boot_stats_remove(struct platform_device *pdev)
>> +{
>> + struct bs_data *drvdata = platform_get_drvdata(pdev);
>> +
>> + debugfs_remove_recursive(drvdata->dbg_dir);
>> +}
>> +
>> +static const struct of_device_id boot_stats_dt_match[] = {
>> + { .compatible = "qcom,imem-bootstats" },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, boot_stats_dt_match);
>> +
>> +static struct platform_driver boot_stat_driver = {
>> + .probe = boot_stats_probe,
>> + .remove_new = boot_stats_remove,
>> + .driver = {
>> + .name = "qcom-boot-stats",
>> + .of_match_table = boot_stats_dt_match,
>> + },
>> +};
>> +module_platform_driver(boot_stat_driver);
>> +
>> +MODULE_DESCRIPTION("Qualcomm Technologies Inc. Boot Stat driver");
>> +MODULE_LICENSE("GPL");
>> --
>> 2.17.1
>>
>
>
More information about the linux-arm-kernel
mailing list