[PATCH 4/4] riscv: Enable perf counters user access only through perf
Emil Renner Berthing
emil.renner.berthing at canonical.com
Tue May 9 05:24:50 PDT 2023
On Wed, 26 Apr 2023 at 15:19, Alexandre Ghiti <alexghiti at rivosinc.com> wrote:
> On Wed, Apr 26, 2023 at 2:57 PM Andrew Jones <ajones at ventanamicro.com> wrote:
> >
> > On Thu, Apr 13, 2023 at 06:17:25PM +0200, Alexandre Ghiti wrote:
> > > We used to unconditionnally expose the cycle and instret csrs to
> > > userspace, which gives rise to security concerns.
> > >
> > > So only allow access to hw counters from userspace through the perf
> > > framework which will handle context switchs, per-task events...etc. But
> > > as we cannot break userspace, we give the user the choice to go back to
> > > the previous behaviour by setting the sysctl perf_user_access.
> > >
> > > We also introduce a means to directly map the hardware counters to
> > > userspace, thus avoiding the need for syscalls whenever an application
> > > wants to access counters values.
> > >
> > > Note that arch_perf_update_userpage is a copy of arm64 code.
> > >
> > > Signed-off-by: Alexandre Ghiti <alexghiti at rivosinc.com>
> > > ---
> > > Documentation/admin-guide/sysctl/kernel.rst | 23 +++-
> > > arch/riscv/include/asm/perf_event.h | 3 +
> > > arch/riscv/kernel/Makefile | 2 +-
> > > arch/riscv/kernel/perf_event.c | 65 +++++++++++
> > > drivers/perf/riscv_pmu.c | 42 ++++++++
> > > drivers/perf/riscv_pmu_legacy.c | 17 +++
> > > drivers/perf/riscv_pmu_sbi.c | 113 ++++++++++++++++++--
> > > include/linux/perf/riscv_pmu.h | 3 +
> > > tools/lib/perf/mmap.c | 65 +++++++++++
> > > 9 files changed, 322 insertions(+), 11 deletions(-)
> > > create mode 100644 arch/riscv/kernel/perf_event.c
> > >
> > > diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst
> > > index 4b7bfea28cd7..02b2a40a3647 100644
> > > --- a/Documentation/admin-guide/sysctl/kernel.rst
> > > +++ b/Documentation/admin-guide/sysctl/kernel.rst
> > > @@ -941,16 +941,31 @@ enabled, otherwise writing to this file will return ``-EBUSY``.
> > > The default value is 8.
> > >
> > >
> > > -perf_user_access (arm64 only)
> > > -=================================
> > > +perf_user_access (arm64 and riscv only)
> > > +=======================================
> > > +
> > > +Controls user space access for reading perf event counters.
> > >
> > > -Controls user space access for reading perf event counters. When set to 1,
> > > -user space can read performance monitor counter registers directly.
> > > +arm64
> > > +=====
> > >
> > > The default value is 0 (access disabled).
> > > +When set to 1, user space can read performance monitor counter registers
> > > +directly.
> > >
> > > See Documentation/arm64/perf.rst for more information.
> > >
> > > +riscv
> > > +=====
> > > +
> > > +When set to 0, user access is disabled.
> > > +
> > > +When set to 1, user space can read performance monitor counter registers
> > > +directly only through perf, any direct access without perf intervention will
> > > +trigger an illegal instruction.
> > > +
> > > +The default value is 2, it enables the legacy mode, that is user space has
> > > +direct access to cycle, time and insret CSRs only.
> >
> > I think this default value should be a Kconfig symbol, allowing kernels to
> > be built with a secure default.
>
> Actually I was more in favor of having the default to 1 (ie the secure
> option) and let the distros deal with the legacy mode (via a sysctl
> parameter on the command line) as long as user-space has not been
> fixed: does that make sense?
With the Linux policy of not breaking userspace I wouldn't think
having anything but 2 as the default is ok. Is there a reason we can't
have a mode that allows both the legacy and perf interface?
> > >
> > > pid_max
> > > =======
> > > diff --git a/arch/riscv/include/asm/perf_event.h b/arch/riscv/include/asm/perf_event.h
> > > index d42c901f9a97..9fdfdd9dc92d 100644
> > > --- a/arch/riscv/include/asm/perf_event.h
> > > +++ b/arch/riscv/include/asm/perf_event.h
> > > @@ -9,5 +9,8 @@
> > > #define _ASM_RISCV_PERF_EVENT_H
> > >
> > > #include <linux/perf_event.h>
> > > +
> > > +#define PERF_EVENT_FLAG_LEGACY 1
> > > +
> > > #define perf_arch_bpf_user_pt_regs(regs) (struct user_regs_struct *)regs
> > > #endif /* _ASM_RISCV_PERF_EVENT_H */
> > > diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
> > > index aa22f87faeae..9ae951b07847 100644
> > > --- a/arch/riscv/kernel/Makefile
> > > +++ b/arch/riscv/kernel/Makefile
> > > @@ -70,7 +70,7 @@ obj-$(CONFIG_DYNAMIC_FTRACE) += mcount-dyn.o
> > >
> > > obj-$(CONFIG_TRACE_IRQFLAGS) += trace_irq.o
> > >
> > > -obj-$(CONFIG_PERF_EVENTS) += perf_callchain.o
> > > +obj-$(CONFIG_PERF_EVENTS) += perf_callchain.o perf_event.o
> > > obj-$(CONFIG_HAVE_PERF_REGS) += perf_regs.o
> > > obj-$(CONFIG_RISCV_SBI) += sbi.o
> > > ifeq ($(CONFIG_RISCV_SBI), y)
> > > diff --git a/arch/riscv/kernel/perf_event.c b/arch/riscv/kernel/perf_event.c
> > > new file mode 100644
> > > index 000000000000..4a75ab628bfb
> > > --- /dev/null
> > > +++ b/arch/riscv/kernel/perf_event.c
> > > @@ -0,0 +1,65 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +#include <linux/perf/riscv_pmu.h>
> > > +#include <linux/sched_clock.h>
> > > +
> > > +void arch_perf_update_userpage(struct perf_event *event,
> > > + struct perf_event_mmap_page *userpg, u64 now)
> > > +{
> > > + struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
> > > + struct clock_read_data *rd;
> > > + unsigned int seq;
> > > + u64 ns;
> > > +
> > > + userpg->cap_user_time = 0;
> > > + userpg->cap_user_time_zero = 0;
> > > + userpg->cap_user_time_short = 0;
> > > + userpg->cap_user_rdpmc =
> > > + !!(event->hw.flags & PERF_EVENT_FLAG_USER_READ_CNT);
> > > +
> > > + /*
> > > + * The counters are 64-bit but the priv spec doesn't mandate all the
> > > + * bits to be implemented: that's why, counter width can vary based on
> > > + * the cpu vendor.
> > > + */
> > > + userpg->pmc_width = rvpmu->ctr_get_width(event->hw.idx) + 1;
> > > +
> > > + do {
> > > + rd = sched_clock_read_begin(&seq);
> > > +
> > > + userpg->time_mult = rd->mult;
> > > + userpg->time_shift = rd->shift;
> > > + userpg->time_zero = rd->epoch_ns;
> > > + userpg->time_cycles = rd->epoch_cyc;
> > > + userpg->time_mask = rd->sched_clock_mask;
> > > +
> > > + /*
> > > + * Subtract the cycle base, such that software that
> > > + * doesn't know about cap_user_time_short still 'works'
> > > + * assuming no wraps.
> > > + */
> > > + ns = mul_u64_u32_shr(rd->epoch_cyc, rd->mult, rd->shift);
> > > + userpg->time_zero -= ns;
> > > +
> > > + } while (sched_clock_read_retry(seq));
> > > +
> > > + userpg->time_offset = userpg->time_zero - now;
> > > +
> > > + /*
> > > + * time_shift is not expected to be greater than 31 due to
> > > + * the original published conversion algorithm shifting a
> > > + * 32-bit value (now specifies a 64-bit value) - refer
> > > + * perf_event_mmap_page documentation in perf_event.h.
> > > + */
> > > + if (userpg->time_shift == 32) {
> > > + userpg->time_shift = 31;
> > > + userpg->time_mult >>= 1;
> > > + }
> > > +
> > > + /*
> > > + * Internal timekeeping for enabled/running/stopped times
> > > + * is always computed with the sched_clock.
> > > + */
> > > + userpg->cap_user_time = 1;
> > > + userpg->cap_user_time_zero = 1;
> > > + userpg->cap_user_time_short = 1;
> > > +}
> > > diff --git a/drivers/perf/riscv_pmu.c b/drivers/perf/riscv_pmu.c
> > > index ebca5eab9c9b..12675ee1123c 100644
> > > --- a/drivers/perf/riscv_pmu.c
> > > +++ b/drivers/perf/riscv_pmu.c
> > > @@ -171,6 +171,8 @@ int riscv_pmu_event_set_period(struct perf_event *event)
> > >
> > > local64_set(&hwc->prev_count, (u64)-left);
> > >
> > > + perf_event_update_userpage(event);
> > > +
> > > return overflow;
> > > }
> > >
> > > @@ -283,6 +285,43 @@ static int riscv_pmu_event_init(struct perf_event *event)
> > > return 0;
> > > }
> > >
> > > +static int riscv_pmu_event_idx(struct perf_event *event)
> > > +{
> > > + struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
> > > +
> > > + if (!(event->hw.flags & PERF_EVENT_FLAG_USER_READ_CNT))
> > > + return 0;
> > > +
> > > + /*
> > > + * cycle and instret can either be retrieved from their fixed counters
> > > + * or from programmable counters, the latter being the preferred way
> > > + * since cycle and instret counters do not support sampling.
> > > + */
> > > +
> > > + return rvpmu->csr_index(event) + 1;
> > > +}
> > > +
> > > +static void riscv_pmu_event_mapped(struct perf_event *event, struct mm_struct *mm)
> > > +{
> > > + /*
> > > + * The user mmapped the event to directly access it: this is where
> > > + * we determine based on sysctl_perf_user_access if we grant userspace
> > > + * the direct access to this event. That means that within the same
> > > + * task, some events may be directly accessible and some other may not,
> > > + * if the user changes the value of sysctl_perf_user_accesss in the
> > > + * meantime.
> > > + */
> > > + struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
> > > +
> > > + event->hw.flags |= rvpmu->event_flags(event);
> > > + perf_event_update_userpage(event);
> > > +}
> > > +
> > > +static void riscv_pmu_event_unmapped(struct perf_event *event, struct mm_struct *mm)
> > > +{
> > > + event->hw.flags &= ~PERF_EVENT_FLAG_USER_READ_CNT;
> > > +}
> > > +
> > > struct riscv_pmu *riscv_pmu_alloc(void)
> > > {
> > > struct riscv_pmu *pmu;
> > > @@ -307,6 +346,9 @@ struct riscv_pmu *riscv_pmu_alloc(void)
> > > }
> > > pmu->pmu = (struct pmu) {
> > > .event_init = riscv_pmu_event_init,
> > > + .event_mapped = riscv_pmu_event_mapped,
> > > + .event_unmapped = riscv_pmu_event_unmapped,
> > > + .event_idx = riscv_pmu_event_idx,
> > > .add = riscv_pmu_add,
> > > .del = riscv_pmu_del,
> > > .start = riscv_pmu_start,
> > > diff --git a/drivers/perf/riscv_pmu_legacy.c b/drivers/perf/riscv_pmu_legacy.c
> > > index 0d8c9d8849ee..35c4c9097a0f 100644
> > > --- a/drivers/perf/riscv_pmu_legacy.c
> > > +++ b/drivers/perf/riscv_pmu_legacy.c
> > > @@ -74,6 +74,21 @@ static void pmu_legacy_ctr_start(struct perf_event *event, u64 ival)
> > > local64_set(&hwc->prev_count, initial_val);
> > > }
> > >
> > > +static uint8_t pmu_legacy_csr_index(struct perf_event *event)
> > > +{
> > > + return event->hw.idx;
> > > +}
> > > +
> > > +static int pmu_legacy_event_flags(struct perf_event *event)
> > > +{
> > > + /* In legacy mode, the first 3 CSRs are available. */
> > > + if (event->attr.config != PERF_COUNT_HW_CPU_CYCLES &&
> > > + event->attr.config != PERF_COUNT_HW_INSTRUCTIONS)
> > > + return 0;
> > > +
> > > + return PERF_EVENT_FLAG_USER_READ_CNT;
> > > +}
> > > +
> > > /*
> > > * This is just a simple implementation to allow legacy implementations
> > > * compatible with new RISC-V PMU driver framework.
> > > @@ -94,6 +109,8 @@ static void pmu_legacy_init(struct riscv_pmu *pmu)
> > > pmu->ctr_get_width = NULL;
> > > pmu->ctr_clear_idx = NULL;
> > > pmu->ctr_read = pmu_legacy_read_ctr;
> > > + pmu->event_flags = pmu_legacy_event_flags;
> > > + pmu->csr_index = pmu_legacy_csr_index;
> > >
> > > perf_pmu_register(&pmu->pmu, "cpu", PERF_TYPE_RAW);
> > > }
> > > diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
> > > index 70cb50fd41c2..af7f3128b6b8 100644
> > > --- a/drivers/perf/riscv_pmu_sbi.c
> > > +++ b/drivers/perf/riscv_pmu_sbi.c
> > > @@ -24,6 +24,10 @@
> > > #include <asm/sbi.h>
> > > #include <asm/hwcap.h>
> > >
> > > +#define SYSCTL_NO_USER_ACCESS 0
> > > +#define SYSCTL_USER_ACCESS 1
> > > +#define SYSCTL_LEGACY 2
> > > +
> > > PMU_FORMAT_ATTR(event, "config:0-47");
> > > PMU_FORMAT_ATTR(firmware, "config:63");
> > >
> > > @@ -43,6 +47,9 @@ static const struct attribute_group *riscv_pmu_attr_groups[] = {
> > > NULL,
> > > };
> > >
> > > +/* Allow legacy access by default */
> > > +static int sysctl_perf_user_access __read_mostly = SYSCTL_LEGACY;
> > > +
> > > /*
> > > * RISC-V doesn't have heterogeneous harts yet. This need to be part of
> > > * per_cpu in case of harts with different pmu counters
> > > @@ -301,6 +308,11 @@ int riscv_pmu_get_hpm_info(u32 *hw_ctr_width, u32 *num_hw_ctr)
> > > }
> > > EXPORT_SYMBOL_GPL(riscv_pmu_get_hpm_info);
> > >
> > > +static uint8_t pmu_sbi_csr_index(struct perf_event *event)
> > > +{
> > > + return pmu_ctr_list[event->hw.idx].csr - CSR_CYCLE;
> > > +}
> > > +
> > > static unsigned long pmu_sbi_get_filter_flags(struct perf_event *event)
> > > {
> > > unsigned long cflags = 0;
> > > @@ -329,18 +341,30 @@ static int pmu_sbi_ctr_get_idx(struct perf_event *event)
> > > struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events);
> > > struct sbiret ret;
> > > int idx;
> > > - uint64_t cbase = 0;
> > > + uint64_t cbase = 0, cmask = rvpmu->cmask;
> > > unsigned long cflags = 0;
> > >
> > > cflags = pmu_sbi_get_filter_flags(event);
> > > +
> > > + /* In legacy mode, we have to force the fixed counters for those events */
> > > + if (hwc->flags & PERF_EVENT_FLAG_LEGACY) {
> > > + if (event->attr.config == PERF_COUNT_HW_CPU_CYCLES) {
> > > + cflags |= SBI_PMU_CFG_FLAG_SKIP_MATCH;
> > > + cmask = 1;
> > > + } else if (event->attr.config == PERF_COUNT_HW_INSTRUCTIONS) {
> > > + cflags |= SBI_PMU_CFG_FLAG_SKIP_MATCH;
> > > + cmask = 1UL << (CSR_INSTRET - CSR_CYCLE);
> > > + }
> > > + }
> > > +
> > > /* retrieve the available counter index */
> > > #if defined(CONFIG_32BIT)
> > > ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase,
> > > - rvpmu->cmask, cflags, hwc->event_base, hwc->config,
> > > + cmask, cflags, hwc->event_base, hwc->config,
> > > hwc->config >> 32);
> > > #else
> > > ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase,
> > > - rvpmu->cmask, cflags, hwc->event_base, hwc->config, 0);
> > > + cmask, cflags, hwc->event_base, hwc->config, 0);
> > > #endif
> > > if (ret.error) {
> > > pr_debug("Not able to find a counter for event %lx config %llx\n",
> > > @@ -490,6 +514,11 @@ static void pmu_sbi_ctr_start(struct perf_event *event, u64 ival)
> > > if (ret.error && (ret.error != SBI_ERR_ALREADY_STARTED))
> > > pr_err("Starting counter idx %d failed with error %d\n",
> > > hwc->idx, sbi_err_map_linux_errno(ret.error));
> > > +
> > > + if (!(event->hw.flags & PERF_EVENT_FLAG_LEGACY) &&
> > > + event->hw.flags & PERF_EVENT_FLAG_USER_READ_CNT)
> > > + csr_write(CSR_SCOUNTEREN,
> > > + csr_read(CSR_SCOUNTEREN) | (1 << pmu_sbi_csr_index(event)));
> > > }
> > >
> > > static void pmu_sbi_ctr_stop(struct perf_event *event, unsigned long flag)
> > > @@ -497,6 +526,11 @@ static void pmu_sbi_ctr_stop(struct perf_event *event, unsigned long flag)
> > > struct sbiret ret;
> > > struct hw_perf_event *hwc = &event->hw;
> > >
> > > + if (!(event->hw.flags & PERF_EVENT_FLAG_LEGACY) &&
> > > + event->hw.flags & PERF_EVENT_FLAG_USER_READ_CNT)
> > > + csr_write(CSR_SCOUNTEREN,
> > > + csr_read(CSR_SCOUNTEREN) & ~(1 << pmu_sbi_csr_index(event)));
> > > +
> > > ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, hwc->idx, 1, flag, 0, 0, 0);
> > > if (ret.error && (ret.error != SBI_ERR_ALREADY_STOPPED) &&
> > > flag != SBI_PMU_STOP_FLAG_RESET)
> > > @@ -704,10 +738,13 @@ static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node)
> > > struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events);
> > >
> > > /*
> > > - * Enable the access for CYCLE, TIME, and INSTRET CSRs from userspace,
> > > - * as is necessary to maintain uABI compatibility.
> > > + * We keep enabling userspace access to CYCLE, TIME and INSRET via the
> > > + * legacy option but that will be removed in the future.
> >
> > Will it? The documentation hunk didn't mention that value 2 was depreciated.
>
> You're right, I'll add that to the documentation too, thanks.
>
> >
> > > */
> > > - csr_write(CSR_SCOUNTEREN, 0x7);
> > > + if (sysctl_perf_user_access == SYSCTL_LEGACY)
> > > + csr_write(CSR_SCOUNTEREN, 0x7);
> > > + else
> > > + csr_write(CSR_SCOUNTEREN, 0x2);
> > >
> > > /* Stop all the counters so that they can be enabled from perf */
> > > pmu_sbi_stop_all(pmu);
> > > @@ -851,6 +888,66 @@ static void riscv_pmu_destroy(struct riscv_pmu *pmu)
> > > cpuhp_state_remove_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
> > > }
> > >
> > > +static int pmu_sbi_event_flags(struct perf_event *event)
> > > +{
> > > + if (sysctl_perf_user_access == SYSCTL_NO_USER_ACCESS)
> > > + return 0;
> > > +
> > > + /* In legacy mode, the first 3 CSRs are available. */
> > > + if (sysctl_perf_user_access == SYSCTL_LEGACY) {
> > > + int flags = PERF_EVENT_FLAG_LEGACY;
> > > +
> > > + if (event->attr.config == PERF_COUNT_HW_CPU_CYCLES ||
> > > + event->attr.config == PERF_COUNT_HW_INSTRUCTIONS)
> > > + flags |= PERF_EVENT_FLAG_USER_READ_CNT;
> > > +
> > > + return flags;
> > > + }
> > > +
> > > + return PERF_EVENT_FLAG_USER_READ_CNT;
> > > +}
> > > +
> > > +static void riscv_pmu_update_counter_access(void *info)
> > > +{
> > > + if (sysctl_perf_user_access == SYSCTL_LEGACY)
> > > + csr_write(CSR_SCOUNTEREN, 0x7);
> > > + else
> > > + csr_write(CSR_SCOUNTEREN, 0x2);
> > > +}
> > > +
> > > +static int riscv_pmu_proc_user_access_handler(struct ctl_table *table,
> > > + int write, void *buffer,
> > > + size_t *lenp, loff_t *ppos)
> > > +{
> > > + int prev = sysctl_perf_user_access;
> > > + int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
> > > +
> > > + /*
> > > + * Test against the previous value since we clear SCOUNTEREN when
> > > + * sysctl_perf_user_access is set to SYSCTL_USER_ACCESS, but we should
> > > + * not do that if that was already the case.
> > > + */
> > > + if (ret || !write || prev == sysctl_perf_user_access)
> > > + return ret;
> > > +
> > > + on_each_cpu(riscv_pmu_update_counter_access, (void *)&prev, 1);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static struct ctl_table sbi_pmu_sysctl_table[] = {
> > > + {
> > > + .procname = "perf_user_access",
> > > + .data = &sysctl_perf_user_access,
> > > + .maxlen = sizeof(unsigned int),
> > > + .mode = 0644,
> > > + .proc_handler = riscv_pmu_proc_user_access_handler,
> > > + .extra1 = SYSCTL_ZERO,
> > > + .extra2 = SYSCTL_TWO,
> > > + },
> > > + { }
> > > +};
> > > +
> > > static int pmu_sbi_device_probe(struct platform_device *pdev)
> > > {
> > > struct riscv_pmu *pmu = NULL;
> > > @@ -888,6 +985,8 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
> > > pmu->ctr_get_width = pmu_sbi_ctr_get_width;
> > > pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
> > > pmu->ctr_read = pmu_sbi_ctr_read;
> > > + pmu->event_flags = pmu_sbi_event_flags;
> > > + pmu->csr_index = pmu_sbi_csr_index;
> > >
> > > ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
> > > if (ret)
> > > @@ -901,6 +1000,8 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
> > > if (ret)
> > > goto out_unregister;
> > >
> > > + register_sysctl("kernel", sbi_pmu_sysctl_table);
> > > +
> > > return 0;
> > >
> > > out_unregister:
> > > diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h
> > > index 9f70d94942e0..ba19634d815c 100644
> > > --- a/include/linux/perf/riscv_pmu.h
> > > +++ b/include/linux/perf/riscv_pmu.h
> > > @@ -12,6 +12,7 @@
> > > #include <linux/perf_event.h>
> > > #include <linux/ptrace.h>
> > > #include <linux/interrupt.h>
> > > +#include <asm/perf_event.h>
> > >
> > > #ifdef CONFIG_RISCV_PMU
> > >
> > > @@ -55,6 +56,8 @@ struct riscv_pmu {
> > > void (*ctr_start)(struct perf_event *event, u64 init_val);
> > > void (*ctr_stop)(struct perf_event *event, unsigned long flag);
> > > int (*event_map)(struct perf_event *event, u64 *config);
> > > + int (*event_flags)(struct perf_event *event);
> > > + uint8_t (*csr_index)(struct perf_event *event);
> > >
> > > struct cpu_hw_events __percpu *hw_events;
> > > struct hlist_node node;
> > > diff --git a/tools/lib/perf/mmap.c b/tools/lib/perf/mmap.c
> > > index 0d1634cedf44..18f2abb1584a 100644
> > > --- a/tools/lib/perf/mmap.c
> > > +++ b/tools/lib/perf/mmap.c
> > > @@ -392,6 +392,71 @@ static u64 read_perf_counter(unsigned int counter)
> > >
> > > static u64 read_timestamp(void) { return read_sysreg(cntvct_el0); }
> > >
> > > +#elif defined(__riscv) && __riscv_xlen == 64
> >
> > It's enough to just check __riscv_xlen.
>
> Right, thanks
>
> >
> > > +
> > > +#define CSR_CYCLE 0xc00
> > > +#define CSR_TIME 0xc01
> > > +#define CSR_CYCLEH 0xc80
> > > +
> > > +#define csr_read(csr) \
> > > +({ \
> > > + register unsigned long __v; \
> > > + __asm__ __volatile__ ("csrr %0, " #csr \
> > > + : "=r" (__v) : \
> > > + : "memory"); \
> > > + __v; \
> > > +})
> > > +
> > > +static unsigned long csr_read_num(int csr_num)
> > > +{
> > > +#define switchcase_csr_read(__csr_num, __val) {\
> > > + case __csr_num: \
> > > + __val = csr_read(__csr_num); \
> > > + break; }
> > > +#define switchcase_csr_read_2(__csr_num, __val) {\
> > > + switchcase_csr_read(__csr_num + 0, __val) \
> > > + switchcase_csr_read(__csr_num + 1, __val)}
> > > +#define switchcase_csr_read_4(__csr_num, __val) {\
> > > + switchcase_csr_read_2(__csr_num + 0, __val) \
> > > + switchcase_csr_read_2(__csr_num + 2, __val)}
> > > +#define switchcase_csr_read_8(__csr_num, __val) {\
> > > + switchcase_csr_read_4(__csr_num + 0, __val) \
> > > + switchcase_csr_read_4(__csr_num + 4, __val)}
> > > +#define switchcase_csr_read_16(__csr_num, __val) {\
> > > + switchcase_csr_read_8(__csr_num + 0, __val) \
> > > + switchcase_csr_read_8(__csr_num + 8, __val)}
> > > +#define switchcase_csr_read_32(__csr_num, __val) {\
> > > + switchcase_csr_read_16(__csr_num + 0, __val) \
> > > + switchcase_csr_read_16(__csr_num + 16, __val)}
> > > +
> > > + unsigned long ret = 0;
> > > +
> > > + switch (csr_num) {
> > > + switchcase_csr_read_32(CSR_CYCLE, ret)
> > > + switchcase_csr_read_32(CSR_CYCLEH, ret)
> > > + default :
> > ^ extra space
> >
>
> Thanks
>
> > > + break;
> > > + }
> > > +
> > > + return ret;
> > > +#undef switchcase_csr_read_32
> > > +#undef switchcase_csr_read_16
> > > +#undef switchcase_csr_read_8
> > > +#undef switchcase_csr_read_4
> > > +#undef switchcase_csr_read_2
> > > +#undef switchcase_csr_read
> > > +}
> > > +
> > > +static u64 read_perf_counter(unsigned int counter)
> > > +{
> > > + return csr_read_num(CSR_CYCLE + counter);
> > > +}
> > > +
> > > +static u64 read_timestamp(void)
> > > +{
> > > + return csr_read_num(CSR_TIME);
> > > +}
> > > +
> > > #else
> > > static u64 read_perf_counter(unsigned int counter __maybe_unused) { return 0; }
> > > static u64 read_timestamp(void) { return 0; }
> > > --
> > > 2.37.2
> > >
> >
> > A lot going on this patch. It'd be easier to review if it was broken up a
> > bit. E.g. import of arm code, the tools/lib/perf/mmap.c hunk, and whatever
> > else makes sense.
>
> Ok, will do that in v2!
>
> >
> > Thanks,
> > drew
>
> Thanks,
>
> Alex
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
More information about the linux-arm-kernel
mailing list