[PATCH 71/89] i2c: sun6i-p2wi: Convert to platform remove callback returning void

[Uwe Kleine-König]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/i2c/busses/i2c-sun6i-p2wi.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-sun6i-p2wi.c b/drivers/i2c/busses/i2c-sun6i-p2wi.c
index 9e3483f507ff..3cff1afe0caa 100644
--- a/drivers/i2c/busses/i2c-sun6i-p2wi.c
+++ b/drivers/i2c/busses/i2c-sun6i-p2wi.c
@@ -313,20 +313,18 @@ static int p2wi_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int p2wi_remove(struct platform_device *dev)
+static void p2wi_remove(struct platform_device *dev)
 {
 	struct p2wi *p2wi = platform_get_drvdata(dev);
 
 	reset_control_assert(p2wi->rstc);
 	clk_disable_unprepare(p2wi->clk);
 	i2c_del_adapter(&p2wi->adapter);
-
-	return 0;
 }
 
 static struct platform_driver p2wi_driver = {
 	.probe	= p2wi_probe,
-	.remove	= p2wi_remove,
+	.remove_new = p2wi_remove,
 	.driver	= {
 		.name = "i2c-sunxi-p2wi",
 		.of_match_table = p2wi_of_match_table,
-- 
2.39.2