[PATCH 44/89] i2c: mxs: Convert to platform remove callback returning void

[Uwe Kleine-König]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/i2c/busses/i2c-mxs.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index e0f3b3545cfe..1d76f1c4dc06 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -864,7 +864,7 @@ static int mxs_i2c_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int mxs_i2c_remove(struct platform_device *pdev)
+static void mxs_i2c_remove(struct platform_device *pdev)
 {
 	struct mxs_i2c_dev *i2c = platform_get_drvdata(pdev);
 
@@ -874,8 +874,6 @@ static int mxs_i2c_remove(struct platform_device *pdev)
 		dma_release_channel(i2c->dmach);
 
 	writel(MXS_I2C_CTRL0_SFTRST, i2c->regs + MXS_I2C_CTRL0_SET);
-
-	return 0;
 }
 
 static struct platform_driver mxs_i2c_driver = {
@@ -884,7 +882,7 @@ static struct platform_driver mxs_i2c_driver = {
 		   .of_match_table = mxs_i2c_dt_ids,
 		   },
 	.probe = mxs_i2c_probe,
-	.remove = mxs_i2c_remove,
+	.remove_new = mxs_i2c_remove,
 };
 
 static int __init mxs_i2c_init(void)
-- 
2.39.2