[PATCH 07/89] i2c: bcm-iproc: Convert to platform remove callback returning void

[Uwe Kleine-König]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/i2c/busses/i2c-bcm-iproc.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 85d8a6b04885..2d8342fdc25d 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -1107,7 +1107,7 @@ static int bcm_iproc_i2c_probe(struct platform_device *pdev)
 	return i2c_add_adapter(adap);
 }
 
-static int bcm_iproc_i2c_remove(struct platform_device *pdev)
+static void bcm_iproc_i2c_remove(struct platform_device *pdev)
 {
 	struct bcm_iproc_i2c_dev *iproc_i2c = platform_get_drvdata(pdev);
 
@@ -1123,8 +1123,6 @@ static int bcm_iproc_i2c_remove(struct platform_device *pdev)
 
 	i2c_del_adapter(&iproc_i2c->adapter);
 	bcm_iproc_i2c_enable_disable(iproc_i2c, false);
-
-	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -1260,7 +1258,7 @@ static struct platform_driver bcm_iproc_i2c_driver = {
 		.pm = BCM_IPROC_I2C_PM_OPS,
 	},
 	.probe = bcm_iproc_i2c_probe,
-	.remove = bcm_iproc_i2c_remove,
+	.remove_new = bcm_iproc_i2c_remove,
 };
 module_platform_driver(bcm_iproc_i2c_driver);
 
-- 
2.39.2