[PATCH v3 1/2] dt-bindings: gpio: Add STMPE YAML DT schema

[Krzysztof Kozlowski]

On 07/05/2023 23:19, Linus Walleij wrote:
> This adds a schema for the STMPE GPIO that while it is used a
> lot in the kernel tree is anyway missing its bindings.
> 
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
> ---
> ChangeLog v2->v3:
> - Use a compact hog node schema backed by the standard hog
>   schema.
> ChangeLog v1->v2:
> - New patch split off from the MFD patch.
> ---
>  .../devicetree/bindings/gpio/st,stmpe-gpio.yaml    | 51 ++++++++++++++++++++++
>  1 file changed, 51 insertions(+)

This should be a conversion of
Documentation/devicetree/bindings/gpio/gpio-stmpe.txt:
1. Expressed in subject, commit msg,
2. With changes against original binding mentioned in commit msg,
3. With removal of old file.

> 
> diff --git a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
> new file mode 100644
> index 000000000000..41aa82b8b3eb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/st,stmpe-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectonics Port Expander (STMPE) GPIO Block
> +
> +description: STMicroelectronics Port Expander (STMPE) is a series of slow

If there is resend/new version, put blank line after description:

> +  bus controllers for various expanded peripherals such as GPIO, keypad,
> +  touchscreen, ADC, PWM or rotator. It can contain one or several different
> +  peripherals connected to SPI or I2C. These bindings pertain to the
> +  GPIO portions of these expanders.
> +
> +maintainers:
> +  - Linus Walleij <linus.walleij at linaro.org>
> +
> +properties:
> +  compatible:
> +    const: st,stmpe-gpio
> +
> +  "#gpio-cells":
> +    const: 2
> +
> +  "#interrupt-cells":
> +    const: 2
> +
> +  gpio-controller: true
> +
> +  interrupt-controller: true
> +
> +  st,norequest-mask:
> +    description: A bitmask of GPIO lines that cannot be requested because for
> +      for example not being connected to anything on the system

Here as well.

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +patternProperties:
> +  "^.+-hog(-[0-9]+)?$":
> +    type: object
> +
> +    required:
> +      - gpio-hog
> +
Best regards,
Krzysztof