[PATCH 1/2] dt-bindings: nvmem: add binding doc for i.MX OCOTP/ELE
Peng Fan (OSS)
peng.fan at oss.nxp.com
Fri May 5 02:17:32 PDT 2023
From: Peng Fan <peng.fan at nxp.com>
There are two parts of i.MX93 OCOTP, with 1st part Fuse shadow block(fsb),
2nd part managed by ELE firmware. This binding doc supports both.
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
.../bindings/nvmem/imx-ocotp-ele.yaml | 65 +++++++++++++++++++
1 file changed, 65 insertions(+)
create mode 100644 Documentation/devicetree/bindings/nvmem/imx-ocotp-ele.yaml
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp-ele.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp-ele.yaml
new file mode 100644
index 000000000000..024594a2bcb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp-ele.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/imx-ocotp-ele.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX9 On-Chip OTP Controller (OCOTP)
+
+maintainers:
+ - Peng Fan <peng.fan at nxp.com>
+
+allOf:
+ - $ref: nvmem.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: fsl,imx93-ocotp-fsb
+ - const: syscon
+ - items:
+ - const: fsl,imx93-ocotp-ele
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx6sx-clock.h>
+
+ ocotp: efuse at 21bc000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,imx6sx-ocotp", "syscon";
+ reg = <0x021bc000 0x4000>;
+ clocks = <&clks IMX6SX_CLK_OCOTP>;
+
+ cpu_speed_grade: speed-grade at 10 {
+ reg = <0x10 4>;
+ };
+
+ tempmon_calib: calib at 38 {
+ reg = <0x38 4>;
+ };
+
+ tempmon_temp_grade: temp-grade at 20 {
+ reg = <0x20 4>;
+ };
+ };
+
+...
--
2.37.1
More information about the linux-arm-kernel
mailing list