[PATCH v9 06/10] ARM: dts: stm32: Add idle/sleep pinmux for USART3

[Steffen Trumtrar]

Add idle and sleep mux option for the USART3 pins_a.

This is used on the Phycore STM32MP1.

Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
---
 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index c8490e5bea16..65a0bc72b174 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -2387,6 +2387,23 @@ pins2 {
 		};
 	};
 
+	usart3_idle_pins_a: usart3-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>; /* USART3_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			bias-disable;
+		};
+	};
+
+	usart3_sleep_pins_a: usart3-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
+		};
+	};
+
 	usart3_pins_b: usart3-1 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
-- 
2.39.1