[PATCH v8 01/10] ARM: dts: stm32: Add alternate pinmux for ethernet

[Steffen Trumtrar]

On 2023-05-02 at 17:20 +02, Alexandre TORGUE <alexandre.torgue at foss.st.com> wrote:
> Hi Steffen
>
> On 4/11/23 10:30, Steffen Trumtrar wrote:
>> Add another option for the ethernet0 pins.
>> It is almost identical to ethernet0_rgmii_pins_c apart from TXD0/1.
>> This is used on the Phycore STM32MP1.
>> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
>> ---
>>   arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 50 ++++++++++++++++++++++++
>>   1 file changed, 50 insertions(+)
>> diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
>> b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
>> index a9d2bec990141..1c97db4dbfc6d 100644
>> --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
>> +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
>> @@ -341,6 +341,56 @@ pins1 {
>>   		};
>>   	};
>>   +	ethernet0_rgmii_pins_d: rgmii-3 {
>> +		pins1 {
>> +			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
>> +				 <STM32_PINMUX('G', 13, AF11)>,	/* ETH_RGMII_TXD0 */
>> +				 <STM32_PINMUX('G', 14, AF11)>,	/* ETH_RGMII_TXD1 */
>> +				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
>> +				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
>> +				 <STM32_PINMUX('B', 11, AF11)>,	/* ETH_RGMII_TX_CTL */
>> +				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
>> +			bias-disable;
>> +			drive-push-pull;
>> +			slew-rate = <2>;
>> +		};
>> +		pins2 {
>> +			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
>> +			bias-disable;
>> +			drive-push-pull;
>> +			slew-rate = <0>;
>> +		};
>> +		pins3 {
>> +			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
>> +				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
>> +				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
>> +				 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
>> +				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
>> +				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
>> +			bias-disable;
>> +		};
>> +	};
>> +
>> +	ethernet0_rgmii_sleep_pins_d: rgmii-sleep-8 {
>
> Mistake here, it should be rgmii-sleep-3

Meh, good catch. You're right of course, will send a v9.


Thanks,
Steffen

--
Pengutronix e.K.                | Dipl.-Inform. Steffen Trumtrar |
Steuerwalder Str. 21            | https://www.pengutronix.de/    |
31137 Hildesheim, Germany       | Phone: +49-5121-206917-0       |
Amtsgericht Hildesheim, HRA 2686| Fax:   +49-5121-206917-5555    |