[PATCH v2 0/4] Add i.MX8MP-EVK USB Gadget Support

[Marco Felsch]

Hi all,

this adds the usb gadget support to the i.MX8MP-EVK. This Series is
based on [1] and therefore it is already a v2. Thanks to Li and Andreas
for the very useful feedback.

Patch1-3: Add the mssing support for USB-SS GPIO muxes. This is required
          to have proper USB-SS support on the EVK.

Patch4: Adds the devicetree integration.

[1] https://lore.kernel.org/all/20230323105826.2058003-1-m.felsch@pengutronix.de/

Regards,
  Marco

---
Marco Felsch (4):
      dt-bindings: usb: gpio-sbu-mux: add support for ss-data lanes mux
      usb: typec: mux: gpio-sbu-mux: add support for ss data lane muxing
      usb: typec: tcpci: clear the fault status bit
      arm64: dts: imx8mp-evk: add dual-role usb port1 support

 .../devicetree/bindings/usb/gpio-sbu-mux.yaml      | 82 +++++++++++++++++---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts       | 88 ++++++++++++++++++++++
 drivers/usb/typec/mux/Kconfig                      |  5 +-
 drivers/usb/typec/mux/gpio-sbu-mux.c               | 18 ++++-
 drivers/usb/typec/tcpm/tcpci.c                     |  5 ++
 include/linux/usb/tcpci.h                          |  1 +
 6 files changed, 185 insertions(+), 14 deletions(-)
---
base-commit: 457391b0380335d5e9a5babdec90ac53928b23b4
change-id: 20230504-b4-v6-3-topic-boards-imx8mp-evk-dual-role-usb-8dcf6274d9df

Best regards,
-- 
Marco Felsch <m.felsch at pengutronix.de>