[PATCH V7 3/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver
Yu Tu
yu.tu at amlogic.com
Thu May 4 02:19:29 PDT 2023
On 2023/4/27 17:11, Dmitry Rokosov wrote:
> [ EXTERNAL EMAIL ]
>
> On Thu, Apr 27, 2023 at 04:38:20PM +0800, Yu Tu wrote:
>>
>>
>> On 2023/4/26 19:13, Dmitry Rokosov wrote:
>>> [Some people who received this message don't often get email from ddrokosov at sberdevices.ru. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>>>
>>> [ EXTERNAL EMAIL ]
>>>
>>> On Mon, Apr 17, 2023 at 02:50:04PM +0800, Yu Tu wrote:
>>>> Add the S4 PLL clock controller driver in the s4 SoC family.
>>>>
>>>> Signed-off-by: Yu Tu <yu.tu at amlogic.com>
>>>> ---
>>>> drivers/clk/meson/Kconfig | 13 +
>>>> drivers/clk/meson/Makefile | 1 +
>>>> drivers/clk/meson/s4-pll.c | 902 +++++++++++++++++++++++++++++++++++++
>>>> drivers/clk/meson/s4-pll.h | 87 ++++
>>>> 4 files changed, 1003 insertions(+)
>>>> create mode 100644 drivers/clk/meson/s4-pll.c
>>>> create mode 100644 drivers/clk/meson/s4-pll.h
>>>>
>>>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>>>> index fc002c155bc3..a663c90a3f3b 100644
>>>> --- a/drivers/clk/meson/Kconfig
>>>> +++ b/drivers/clk/meson/Kconfig
>>>> @@ -115,4 +115,17 @@ config COMMON_CLK_G12A
>>>> help
>>>> Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
>>>> devices, aka g12a. Say Y if you want peripherals to work.
>>>> +
>>>> +config COMMON_CLK_S4_PLL
>>>> + tristate "S4 SoC PLL clock controllers support"
>>>> + depends on ARM64
>>>> + default y
>>>> + select COMMON_CLK_MESON_MPLL
>>>> + select COMMON_CLK_MESON_PLL
>>>> + select COMMON_CLK_MESON_REGMAP
>>>> + help
>>>> + Support for the pll clock controller on Amlogic S805X2 and S905Y4 devices,
>>>> + aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229.
>>>> + Say Y if you want the board to work, because plls are the parent of most
>>>> + peripherals.
>>>> endmenu
>>>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>>>> index 6eca2a406ee3..376f49cc13f1 100644
>>>> --- a/drivers/clk/meson/Makefile
>>>> +++ b/drivers/clk/meson/Makefile
>>>> @@ -19,3 +19,4 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
>>>> obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
>>>> obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
>>>> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
>>>> +obj-$(CONFIG_COMMON_CLK_S4_PLL) += s4-pll.o
>>>> diff --git a/drivers/clk/meson/s4-pll.c b/drivers/clk/meson/s4-pll.c
>>>> new file mode 100644
>>>> index 000000000000..5a34d304adf7
>>>> --- /dev/null
>>>> +++ b/drivers/clk/meson/s4-pll.c
>>>> @@ -0,0 +1,902 @@
>>>> +// SPDX-License-Identifier: GPL-2.0+
>>>> +/*
>>>> + * Amlogic Meson-S4 PLL Clock Controller Driver
>>>> + *
>>>> + * Copyright (c) 2021 Amlogic, inc.
>>>> + * Author: Yu Tu <yu.tu at amlogic.com>
>>>> + */
>>>> +
>>>> +#include <linux/clk-provider.h>
>>>> +#include <linux/of_device.h>
>>>> +#include <linux/platform_device.h>
>>>> +
>>>> +#include "clk-mpll.h"
>>>> +#include "clk-pll.h"
>>>> +#include "clk-regmap.h"
>>>> +#include "s4-pll.h"
>>>> +
>>>> +static DEFINE_SPINLOCK(meson_clk_lock);
>>>> +
>>>> +static struct clk_regmap s4_fixed_pll_dco = {
>>>> + .data = &(struct meson_clk_pll_data){
>>>> + .en = {
>>>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>>>> + .shift = 28,
>>>> + .width = 1,
>>>> + },
>>>> + .m = {
>>>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>>>> + .shift = 0,
>>>> + .width = 8,
>>>> + },
>>>> + .n = {
>>>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>>>> + .shift = 10,
>>>> + .width = 5,
>>>> + },
>>>> + .frac = {
>>>> + .reg_off = ANACTRL_FIXPLL_CTRL1,
>>>> + .shift = 0,
>>>> + .width = 17,
>>>> + },
>>>> + .l = {
>>>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>>>> + .shift = 31,
>>>> + .width = 1,
>>>> + },
>>>> + .rst = {
>>>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>>>> + .shift = 29,
>>>> + .width = 1,
>>>> + },
>>>> + },
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "fixed_pll_dco",
>>>> + /*
>>>> + * This clock is a fixed value (4GHz) that is initialized by ROMcode.
>>>> + * This clock won't ever change at runtime.
>>>> + * The chip design determines that this clock cannot be changed after
>>>> + * initialization. To prevent system crash caused by changing
>>>> + * fixed related register in kernel phase. This register is not
>>>> + * writable in the kernel phase.
>>>> + * So we use ro_ops.
>>>> + */
>>>> + .ops = &meson_clk_pll_ro_ops,
>>>> + .parent_data = (const struct clk_parent_data []) {
>>>> + { .fw_name = "xtal", }
>>>> + },
>>>> + .num_parents = 1,
>>>> + },
>>>> +};
>>>> +
>>>> +static struct clk_regmap s4_fixed_pll = {
>>>> + .data = &(struct clk_regmap_div_data){
>>>> + .offset = ANACTRL_FIXPLL_CTRL0,
>>>> + .shift = 16,
>>>> + .width = 2,
>>>> + .flags = CLK_DIVIDER_POWER_OF_TWO,
>>>> + },
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "fixed_pll",
>>>> + /*
>>>> + * This clock is a fixed value (2GHz) that is initialized by ROMcode.
>>>> + * This clock won't ever change at runtime.
>>>> + * The chip design determines that this clock cannot be changed after
>>>> + * initialization. To prevent system crash caused by changing
>>>> + * fixed related register in kernel phase. This register is not
>>>> + * writable in the kernel phase.
>>>> + * So we use ro_ops.
>>>> + */
>>>> + .ops = &clk_regmap_divider_ro_ops,
>>>> + .parent_hws = (const struct clk_hw *[]) {
>>>> + &s4_fixed_pll_dco.hw
>>>> + },
>>>> + .num_parents = 1,
>>>> + /*
>>>> + * This clock won't ever change at runtime so
>>>> + * CLK_SET_RATE_PARENT is not required
>>>> + */
>>>> + },
>>>> +};
>>>> +
>>>> +static struct clk_fixed_factor s4_fclk_div2_div = {
>>>> + .mult = 1,
>>>> + .div = 2,
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "fclk_div2_div",
>>>> + .ops = &clk_fixed_factor_ops,
>>>> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
>>>> + .num_parents = 1,
>>>> + },
>>>> +};
>>>> +
>>>> +static struct clk_regmap s4_fclk_div2 = {
>>>> + .data = &(struct clk_regmap_gate_data){
>>>> + .offset = ANACTRL_FIXPLL_CTRL1,
>>>> + .bit_idx = 24,
>>>> + },
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "fclk_div2",
>>>> + /*
>>>> + * This clock is a fixed value (1GHz) that is initialized by ROMcode.
>>>> + * This clock won't ever ungate at runtime.
>>>> + * The chip design determines that this clock cannot be changed after
>>>> + * initialization. To prevent system crash caused by changing
>>>> + * fixed related register in kernel phase. This register is not
>>>> + * writable in the kernel phase.
>>>> + * So we use ro_ops.
>>>> + */
>>>
>>> The above comment has been copied and pasted many times.
>>> Please collapse it and refer to it from specific locations.
>>
>> Just three times. The goal is to make it clear to the viewer.
>>
>
> I think, reference to one time mentioned comment is clear for viewer too.
> Also Jerome has pointed to this problem for the A1 driver as well:
>
> https://lore.kernel.org/all/1jtty6o5so.fsf@starbuckisacylon.baylibre.com/
I will refer to your way in A1.
>
>>>
>>>> + .ops = &clk_regmap_gate_ro_ops,
>>>> + .parent_hws = (const struct clk_hw *[]) {
>>>> + &s4_fclk_div2_div.hw
>>>> + },
>>>> + .num_parents = 1,
>>>> + },
>>>> +};
>>>> +
>>>> +static struct clk_fixed_factor s4_fclk_div3_div = {
>>>> + .mult = 1,
>>>> + .div = 3,
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "fclk_div3_div",
>>>> + .ops = &clk_fixed_factor_ops,
>>>> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
>>>> + .num_parents = 1,
>>>> + },
>>>> +};
>>>> +
>>>> +static struct clk_regmap s4_fclk_div3 = {
>>>> + .data = &(struct clk_regmap_gate_data){
>>>> + .offset = ANACTRL_FIXPLL_CTRL1,
>>>> + .bit_idx = 20,
>>>> + },
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "fclk_div3",
>>>> + .ops = &clk_regmap_gate_ro_ops,
>>>> + .parent_hws = (const struct clk_hw *[]) {
>>>> + &s4_fclk_div3_div.hw
>>>> + },
>>>> + .num_parents = 1,
>>>> + },
>>>> +};
>>>> +
>>>> +static struct clk_fixed_factor s4_fclk_div4_div = {
>>>> + .mult = 1,
>>>> + .div = 4,
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "fclk_div4_div",
>>>> + .ops = &clk_fixed_factor_ops,
>>>> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
>>>> + .num_parents = 1,
>>>> + },
>>>> +};
>>>> +
>>>> +static struct clk_regmap s4_fclk_div4 = {
>>>> + .data = &(struct clk_regmap_gate_data){
>>>> + .offset = ANACTRL_FIXPLL_CTRL1,
>>>> + .bit_idx = 21,
>>>> + },
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "fclk_div4",
>>>> + .ops = &clk_regmap_gate_ro_ops,
>>>> + .parent_hws = (const struct clk_hw *[]) {
>>>> + &s4_fclk_div4_div.hw
>>>> + },
>>>> + .num_parents = 1,
>>>> + },
>>>> +};
>>>> +
>>>> +static struct clk_fixed_factor s4_fclk_div5_div = {
>>>> + .mult = 1,
>>>> + .div = 5,
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "fclk_div5_div",
>>>> + .ops = &clk_fixed_factor_ops,
>>>> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
>>>> + .num_parents = 1,
>>>> + },
>>>> +};
>>>> +
>>>> +static struct clk_regmap s4_fclk_div5 = {
>>>> + .data = &(struct clk_regmap_gate_data){
>>>> + .offset = ANACTRL_FIXPLL_CTRL1,
>>>> + .bit_idx = 22,
>>>> + },
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "fclk_div5",
>>>> + .ops = &clk_regmap_gate_ro_ops,
>>>> + .parent_hws = (const struct clk_hw *[]) {
>>>> + &s4_fclk_div5_div.hw
>>>> + },
>>>> + .num_parents = 1,
>>>> + },
>>>> +};
>>>> +
>>>> +static struct clk_fixed_factor s4_fclk_div7_div = {
>>>> + .mult = 1,
>>>> + .div = 7,
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "fclk_div7_div",
>>>> + .ops = &clk_fixed_factor_ops,
>>>> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
>>>> + .num_parents = 1,
>>>> + },
>>>> +};
>>>> +
>>>> +static struct clk_regmap s4_fclk_div7 = {
>>>> + .data = &(struct clk_regmap_gate_data){
>>>> + .offset = ANACTRL_FIXPLL_CTRL1,
>>>> + .bit_idx = 23,
>>>> + },
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "fclk_div7",
>>>> + .ops = &clk_regmap_gate_ro_ops,
>>>> + .parent_hws = (const struct clk_hw *[]) {
>>>> + &s4_fclk_div7_div.hw
>>>> + },
>>>> + .num_parents = 1,
>>>> + },
>>>> +};
>>>> +
>>>> +static struct clk_fixed_factor s4_fclk_div2p5_div = {
>>>> + .mult = 2,
>>>> + .div = 5,
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "fclk_div2p5_div",
>>>> + .ops = &clk_fixed_factor_ops,
>>>> + .parent_hws = (const struct clk_hw *[]) {
>>>> + &s4_fixed_pll.hw
>>>> + },
>>>> + .num_parents = 1,
>>>> + },
>>>> +};
>>>> +
>>>> +static struct clk_regmap s4_fclk_div2p5 = {
>>>> + .data = &(struct clk_regmap_gate_data){
>>>> + .offset = ANACTRL_FIXPLL_CTRL1,
>>>> + .bit_idx = 25,
>>>> + },
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "fclk_div2p5",
>>>> + .ops = &clk_regmap_gate_ro_ops,
>>>> + .parent_hws = (const struct clk_hw *[]) {
>>>> + &s4_fclk_div2p5_div.hw
>>>> + },
>>>> + .num_parents = 1,
>>>> + },
>>>> +};
>>>> +
>>>> +static const struct pll_mult_range s4_gp0_pll_mult_range = {
>>>> + .min = 125,
>>>> + .max = 250,
>>>> +};
>>>> +
>>>> +/*
>>>> + * Internal gp0 pll emulation configuration parameters
>>>> + */
>>>> +static const struct reg_sequence s4_gp0_init_regs[] = {
>>>> + { .reg = ANACTRL_GP0PLL_CTRL1, .def = 0x00000000 },
>>>> + { .reg = ANACTRL_GP0PLL_CTRL2, .def = 0x00000000 },
>>>> + { .reg = ANACTRL_GP0PLL_CTRL3, .def = 0x48681c00 },
>>>> + { .reg = ANACTRL_GP0PLL_CTRL4, .def = 0x88770290 },
>>>> + { .reg = ANACTRL_GP0PLL_CTRL5, .def = 0x39272000 },
>>>> + { .reg = ANACTRL_GP0PLL_CTRL6, .def = 0x56540000 }
>>>
>>> Please ensure that the initialization sequence values do not overlap
>>> with the below pll_data bits that are managed during runtime.
>>>
>>
>> That's right. There is a timing requirement for PLL initialization.
>>
>
> Okay, we have already discussed this in another patch series for A1 clock
> drivers, and some overlaps were found.
> I just want to help you find potential problems.
>
> You can find the discussion here:
>
> https://lore.kernel.org/linux-amlogic/1jr0u2azfi.fsf@starbuckisacylon.baylibre.com/ >
>>>> +};
>>>> +
>>>> +static struct clk_regmap s4_gp0_pll_dco = {
>>>> + .data = &(struct meson_clk_pll_data){
>>>> + .en = {
>>>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>>>> + .shift = 28,
>>>> + .width = 1,
>>>> + },
>>>> + .m = {
>>>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>>>> + .shift = 0,
>>>> + .width = 8,
>>>> + },
>>>> + .n = {
>>>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>>>> + .shift = 10,
>>>> + .width = 5,
>>>> + },
>>>> + .frac = {
>>>> + .reg_off = ANACTRL_GP0PLL_CTRL1,
>>>> + .shift = 0,
>>>> + .width = 17,
>>>> + },
>>>> + .l = {
>>>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>>>> + .shift = 31,
>>>> + .width = 1,
>>>> + },
>>>> + .rst = {
>>>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>>>> + .shift = 29,
>>>> + .width = 1,
>>>> + },
>>>> + .range = &s4_gp0_pll_mult_range,
>>>> + .init_regs = s4_gp0_init_regs,
>>>> + .init_count = ARRAY_SIZE(s4_gp0_init_regs),
>>>> + },
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "gp0_pll_dco",
>>>> + .ops = &meson_clk_pll_ops,
>>>> + .parent_data = (const struct clk_parent_data []) {
>>>> + { .fw_name = "xtal", }
>>>> + },
>>>> + .num_parents = 1,
>>>> + },
>>>> +};
>>>> +
>>>> +static struct clk_regmap s4_gp0_pll = {
>>>> + .data = &(struct clk_regmap_div_data){
>>>> + .offset = ANACTRL_GP0PLL_CTRL0,
>>>> + .shift = 16,
>>>> + .width = 3,
>>>> + .flags = (CLK_DIVIDER_POWER_OF_TWO |
>>>> + CLK_DIVIDER_ROUND_CLOSEST),
>>>> + },
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "gp0_pll",
>>>> + .ops = &clk_regmap_divider_ops,
>>>> + .parent_hws = (const struct clk_hw *[]) {
>>>> + &s4_gp0_pll_dco.hw
>>>> + },
>>>> + .num_parents = 1,
>>>> + .flags = CLK_SET_RATE_PARENT,
>>>> + },
>>>> +};
>>>> +
>>>> +/*
>>>> + * Internal hifi pll emulation configuration parameters
>>>> + */
>>>> +static const struct reg_sequence s4_hifi_init_regs[] = {
>>>> + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x00010e56 },
>>>> + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00000000 },
>>>> + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x6a285c00 },
>>>> + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x65771290 },
>>>> + { .reg = ANACTRL_HIFIPLL_CTRL5, .def = 0x39272000 },
>>>> + { .reg = ANACTRL_HIFIPLL_CTRL6, .def = 0x56540000 }
>>>> +};
>>>
>>> Please ensure that the initialization sequence values do not overlap
>>> with the below pll_data bits that are managed during runtime.
>>
>> [...]
>>
>>>
>>>> +
>>>> +static struct clk_regmap s4_hifi_pll_dco = {
>>>> + .data = &(struct meson_clk_pll_data){
>>>> + .en = {
>>>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>>>> + .shift = 28,
>>>> + .width = 1,
>>>> + },
>>>> + .m = {
>>>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>>>> + .shift = 0,
>>>> + .width = 8,
>>>> + },
>>>> + .n = {
>>>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>>>> + .shift = 10,
>>>> + .width = 5,
>>>> + },
>>>> + .frac = {
>>>> + .reg_off = ANACTRL_HIFIPLL_CTRL1,
>>>> + .shift = 0,
>>>> + .width = 17,
>>>> + },
>>>> + .l = {
>>>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>>>> + .shift = 31,
>>>> + .width = 1,
>>>> + },
>>>> + .rst = {
>>>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>>>> + .shift = 29,
>>>> + .width = 1,
>>>> + },
>>>> + .range = &s4_gp0_pll_mult_range,
>>>> + .init_regs = s4_hifi_init_regs,
>>>> + .init_count = ARRAY_SIZE(s4_hifi_init_regs),
>>>> + .flags = CLK_MESON_PLL_ROUND_CLOSEST,
>>>> + },
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "hifi_pll_dco",
>>>> + .ops = &meson_clk_pll_ops,
>>>> + .parent_data = (const struct clk_parent_data []) {
>>>> + { .fw_name = "xtal", }
>>>> + },
>>>> + .num_parents = 1,
>>>> + },
>>>> +};
>>>> +
>>>> +static struct clk_regmap s4_hifi_pll = {
>>>> + .data = &(struct clk_regmap_div_data){
>>>> + .offset = ANACTRL_HIFIPLL_CTRL0,
>>>> + .shift = 16,
>>>> + .width = 2,
>>>> + .flags = (CLK_DIVIDER_POWER_OF_TWO |
>>>> + CLK_DIVIDER_ROUND_CLOSEST),
>>>> + },
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "hifi_pll",
>>>> + .ops = &clk_regmap_divider_ops,
>>>> + .parent_hws = (const struct clk_hw *[]) {
>>>> + &s4_hifi_pll_dco.hw
>>>> + },
>>>> + .num_parents = 1,
>>>> + .flags = CLK_SET_RATE_PARENT,
>>>> + },
>>>> +};
>>>> +
>>>
>>> [...]
>>>
>>>> +static int meson_s4_pll_probe(struct platform_device *pdev)
>>>> +{
>>>> + struct device *dev = &pdev->dev;
>>>> + struct regmap *regmap;
>>>> + void __iomem *base;
>>>> + int ret, i;
>>>> +
>>>> + base = devm_platform_ioremap_resource(pdev, 0);
>>>> + if (IS_ERR(base))
>>>> + return PTR_ERR(base);
>>>> +
>>>> + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config);
>>>> + if (IS_ERR(regmap))
>>>> + return PTR_ERR(regmap);
>>>> +
>>>> + ret = regmap_multi_reg_write(regmap, s4_init_regs, ARRAY_SIZE(s4_init_regs));
>>>> + if (ret) {
>>>> + dev_err(dev, "Failed to init registers\n");
>>>
>>> dev_err_probe()
>>
>> Clock drivers are the foundation on which other drivers run. There is no
>> need to EPROBE_DEFER. Also use EPROBE_DEFER as long as it is better to use
>> when getting the resource.
>>
>
> At least you are requesting the ioremap resource, right? :-)
> And clock driver has tristate config, so can be built as module.
I took a look at where you suggested using dev_err_probe. Neither
regmap_multi_reg_write nor devm_clk_hw_register will return
-EPROBE_DEFER. So is it unreasonable for you to use this in A1.
>
>>>
>>>> + return ret;
>>>> + }
>>>> +
>>>> + /* Populate regmap for the regmap backed clocks */
>>>> + for (i = 0; i < ARRAY_SIZE(s4_pll_clk_regmaps); i++)
>>>> + s4_pll_clk_regmaps[i]->map = regmap;
>>>> +
>>>> + for (i = 0; i < s4_pll_hw_onecell_data.num; i++) {
>>>> + /* array might be sparse */
>>>> + if (!s4_pll_hw_onecell_data.hws[i])
>>>> + continue;
>>>> +
>>>> + ret = devm_clk_hw_register(dev, s4_pll_hw_onecell_data.hws[i]);
>>>> + if (ret) {
>>>> + dev_err(dev, "Clock registration failed\n");
>>>
>>> dev_err_probe()
>>
>> [...]
>>
>>>
>>>> + return ret;
>>>> + }
>>>> + }
>>>> +
>>>> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
>>>> + &s4_pll_hw_onecell_data);
>>>> +}
>>>> +
>>>> +static const struct of_device_id clkc_match_table[] = {
>>>> + {
>>>> + .compatible = "amlogic,s4-pll-clkc",
>>>> + },
>>>> + {}
>>>> +};
>>>> +
>>>> +static struct platform_driver s4_driver = {
>>>> + .probe = meson_s4_pll_probe,
>>>> + .driver = {
>>>> + .name = "s4-pll-clkc",
>>>> + .of_match_table = clkc_match_table,
>>>> + },
>>>> +};
>>>> +
>>>> +module_platform_driver(s4_driver);
>>>> +MODULE_LICENSE("GPL");
>>>> diff --git a/drivers/clk/meson/s4-pll.h b/drivers/clk/meson/s4-pll.h
>>>> new file mode 100644
>>>> index 000000000000..1fb5bececf5f
>>>> --- /dev/null
>>>> +++ b/drivers/clk/meson/s4-pll.h
>>>> @@ -0,0 +1,87 @@
>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
>>>> +/*
>>>> + * Copyright (c) 2021 Amlogic, inc.
>>>> + * Author: Yu Tu <yu.tu at amlogic.com>
>>>> + */
>>>> +
>>>> +#ifndef __MESON_S4_PLL_H__
>>>> +#define __MESON_S4_PLL_H__
>>>> +
>>>> +/* ANA_CTRL - Registers */
>>>> +
>>>> +#define ANACTRL_FIXPLL_CTRL0 0x040
>>>> +#define ANACTRL_FIXPLL_CTRL1 0x044
>>>> +#define ANACTRL_FIXPLL_CTRL2 0x048
>>>> +#define ANACTRL_FIXPLL_CTRL3 0x04c
>>>> +#define ANACTRL_FIXPLL_CTRL4 0x050
>>>> +#define ANACTRL_FIXPLL_CTRL5 0x054
>>>> +#define ANACTRL_FIXPLL_CTRL6 0x058
>>>> +#define ANACTRL_FIXPLL_STS 0x05c
>>>> +#define ANACTRL_GP0PLL_CTRL0 0x080
>>>> +#define ANACTRL_GP0PLL_CTRL1 0x084
>>>> +#define ANACTRL_GP0PLL_CTRL2 0x088
>>>> +#define ANACTRL_GP0PLL_CTRL3 0x08c
>>>> +#define ANACTRL_GP0PLL_CTRL4 0x090
>>>> +#define ANACTRL_GP0PLL_CTRL5 0x094
>>>> +#define ANACTRL_GP0PLL_CTRL6 0x098
>>>> +#define ANACTRL_GP0PLL_STS 0x09c
>>>> +#define ANACTRL_HIFIPLL_CTRL0 0x100
>>>> +#define ANACTRL_HIFIPLL_CTRL1 0x104
>>>> +#define ANACTRL_HIFIPLL_CTRL2 0x108
>>>> +#define ANACTRL_HIFIPLL_CTRL3 0x10c
>>>> +#define ANACTRL_HIFIPLL_CTRL4 0x110
>>>> +#define ANACTRL_HIFIPLL_CTRL5 0x114
>>>> +#define ANACTRL_HIFIPLL_CTRL6 0x118
>>>> +#define ANACTRL_HIFIPLL_STS 0x11c
>>>> +#define ANACTRL_MPLL_CTRL0 0x180
>>>> +#define ANACTRL_MPLL_CTRL1 0x184
>>>> +#define ANACTRL_MPLL_CTRL2 0x188
>>>> +#define ANACTRL_MPLL_CTRL3 0x18c
>>>> +#define ANACTRL_MPLL_CTRL4 0x190
>>>> +#define ANACTRL_MPLL_CTRL5 0x194
>>>> +#define ANACTRL_MPLL_CTRL6 0x198
>>>> +#define ANACTRL_MPLL_CTRL7 0x19c
>>>> +#define ANACTRL_MPLL_CTRL8 0x1a0
>>>> +#define ANACTRL_MPLL_STS 0x1a4
>>>> +#define ANACTRL_HDMIPLL_CTRL0 0x1c0
>>>> +#define ANACTRL_HDMIPLL_CTRL1 0x1c4
>>>> +#define ANACTRL_HDMIPLL_CTRL2 0x1c8
>>>> +#define ANACTRL_HDMIPLL_CTRL3 0x1cc
>>>> +#define ANACTRL_HDMIPLL_CTRL4 0x1d0
>>>> +#define ANACTRL_HDMIPLL_CTRL5 0x1d4
>>>> +#define ANACTRL_HDMIPLL_CTRL6 0x1d8
>>>> +#define ANACTRL_HDMIPLL_STS 0x1dc
>>>> +#define ANACTRL_HDMIPLL_VLOCK 0x1e4
>>>> +
>>>> +/*
>>>> + * CLKID index values
>>>> + *
>>>> + * These indices are entirely contrived and do not map onto the hardware.
>>>> + * It has now been decided to expose everything by default in the DT header:
>>>> + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
>>>
>>> axg-clkc.h?
>>
>> I will correct.
>>
>>>
>>>> + * to expose, such as the internal muxes and dividers of composite clocks,
>>>> + * will remain defined here.
>>>> + */
>>>> +#define CLKID_FIXED_PLL_DCO 0
>>>> +#define CLKID_FCLK_DIV2_DIV 2
>>>> +#define CLKID_FCLK_DIV3_DIV 4
>>>> +#define CLKID_FCLK_DIV4_DIV 6
>>>> +#define CLKID_FCLK_DIV5_DIV 8
>>>> +#define CLKID_FCLK_DIV7_DIV 10
>>>> +#define CLKID_FCLK_DIV2P5_DIV 12
>>>> +#define CLKID_GP0_PLL_DCO 14
>>>> +#define CLKID_HIFI_PLL_DCO 16
>>>> +#define CLKID_HDMI_PLL_DCO 18
>>>> +#define CLKID_HDMI_PLL_OD 19
>>>> +#define CLKID_MPLL_50M_DIV 21
>>>> +#define CLKID_MPLL_PREDIV 23
>>>> +#define CLKID_MPLL0_DIV 24
>>>> +#define CLKID_MPLL1_DIV 26
>>>> +#define CLKID_MPLL2_DIV 28
>>>> +#define CLKID_MPLL3_DIV 30
>>>> +
>>>> +#define NR_PLL_CLKS 32
>>>> +/* include the CLKIDs that have been made part of the DT binding */
>>>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
>>>> +
>>>> +#endif /* __MESON_S4_PLL_H__ */
>>>> --
>>>> 2.33.1
>>>>
>>>>
>>>> _______________________________________________
>>>> linux-amlogic mailing list
>>>> linux-amlogic at lists.infradead.org
>>>> http://lists.infradead.org/mailman/listinfo/linux-amlogic
>>>
>>> --
>>> Thank you,
>>> Dmitry
>
> --
> Thank you,
> Dmitry
More information about the linux-arm-kernel
mailing list