[PATCH 2/6] arm64: dts: qcom: sm8450: add ports subnodes in usb1 qmpphy node

[Neil Armstrong]

Add the USB3+DP Combo QMP PHY port subnodes in the SM8450 SoC DTSI
to avoid duplication in the devices DTs.

Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 595533aeafc4..207afd48788f 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2044,6 +2044,32 @@ usb_1_qmpphy: phy at 88e8000 {
 			#phy-cells = <1>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {
+					};
+				};
+
+				port at 1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint at 0 {
+						reg = <0>;
+					};
+
+					usb_1_qmpphy_dp_in: endpoint at 1 {
+						reg = <1>;
+					};
+				};
+			};
 		};
 
 		remoteproc_slpi: remoteproc at 2400000 {

-- 
2.34.1