[PATCH] Revert "arm64: dts: zynqmp: Add address-cells property to interrupt controllers"

[Laurent Pinchart]

Hi Michal,

Thank you for the patch.

On Tue, May 02, 2023 at 03:51:01PM +0200, Michal Simek wrote:
> This reverts commit c6badbd2d321c19d4f55ee56b0ef12bb3352feac.
> 
> Long time ago this was discussed with Rob at link below that there is no
> need to add address-cells to gpio and interrupt nodes that's why reverting
> this patch for ZynqMP.
> Also there is no visible DTC warning which was seen in past.
> 
> Link: https://lore.kernel.org/r/91e3405245c89f134676449cf3822285798d2ed2.1612189652.git.michal.simek@xilinx.com
> Signed-off-by: Michal Simek <michal.simek at amd.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> ---
> 
>  arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index 51b8349dcacd..2d564ba7e9e4 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -419,7 +419,6 @@ fpd_dma_chan8: dma-controller at fd570000 {
>  
>  		gic: interrupt-controller at f9010000 {
>  			compatible = "arm,gic-400";
> -			#address-cells = <0>;
>  			#interrupt-cells = <3>;
>  			reg = <0x0 0xf9010000 0x0 0x10000>,
>  			      <0x0 0xf9020000 0x0 0x20000>,
> @@ -633,7 +632,6 @@ gem3: ethernet at ff0e0000 {
>  		gpio: gpio at ff0a0000 {
>  			compatible = "xlnx,zynqmp-gpio-1.0";
>  			status = "disabled";
> -			#address-cells = <0>;
>  			#gpio-cells = <0x2>;
>  			gpio-controller;
>  			interrupt-parent = <&gic>;

-- 
Regards,

Laurent Pinchart