[PATCH 2/4] arm64: dts: ti: k3-j721e-som: Describe QSPI flash partition info

[Vaishnav Achath]

Describe OSPI flash partition information through device tree, this
helps to remove passing partition information through the mtdparts
commandline parameter which requires maintaining the partition
information in a string format. J721E CPB has a MT25 64 MiB QSPI flash
with sector size of 128 KiB thus the size of the smallest partition is
chosen as 128 KiB, the partition names and offsets are chosen according
to the corresponding name and offsets in bootloader.

Signed-off-by: Vaishnav Achath <vaishnav.a at ti.com>
---
 .../dts/ti/k3-j721e-common-proc-board.dts     | 46 +++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 7db0603125aa..d6873402ee76 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -513,6 +513,52 @@
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition at 0 {
+				label = "qspi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition at 80000 {
+				label = "qspi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition at 280000 {
+				label = "qspi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition at 680000 {
+				label = "qspi.env";
+				reg = <0x680000 0x20000>;
+			};
+
+			partition at 6a0000 {
+				label = "qspi.env.backup";
+				reg = <0x6a0000 0x20000>;
+			};
+
+			partition at 6c0000 {
+				label = "qspi.sysfw";
+				reg = <0x6c0000 0x100000>;
+			};
+
+			partition at 800000 {
+				label = "qspi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition at 3fe0000 {
+				label = "qspi.phypattern";
+				reg = <0x3fe0000 0x20000>;
+			};
+		};
 	};
 };
 
-- 
2.17.1