[PATCH 09/23] arm64: zynqmp: Add dmas, dp, rtc, watchdogs and opp nodes for SOM

[Michal Simek]

There are couple of IPs which are enabled in origin HW design which are
missing in SOM dt. Add them to match default setup.

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 .../boot/dts/xilinx/zynqmp-sm-k26-revA.dts    | 95 +++++++++++++++++++
 1 file changed, 95 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index dcc17e3ea961..3862168fa026 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -288,6 +288,101 @@ &gpio {
 			  "", "", "", ""; /* 170 - 173 */
 };
 
+&zynqmp_dpsub {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&lpd_dma_chan1 {
+	status = "okay";
+};
+
+&lpd_dma_chan2 {
+	status = "okay";
+};
+
+&lpd_dma_chan3 {
+	status = "okay";
+};
+
+&lpd_dma_chan4 {
+	status = "okay";
+};
+
+&lpd_dma_chan5 {
+	status = "okay";
+};
+
+&lpd_dma_chan6 {
+	status = "okay";
+};
+
+&lpd_dma_chan7 {
+	status = "okay";
+};
+
+&lpd_dma_chan8 {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
 };
+
+&lpd_watchdog {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&cpu_opp_table {
+	opp00 {
+		opp-hz = /bits/ 64 <1333333333>;
+	};
+	opp01 {
+		opp-hz = /bits/ 64 <666666666>;
+	};
+	opp02 {
+		opp-hz = /bits/ 64 <444444444>;
+	};
+	opp03 {
+		opp-hz = /bits/ 64 <333333333>;
+	};
+};
-- 
2.36.1