[Linux-stm32] [PATCH v8 00/10] ARM: stm32: add support for Phycore STM32MP1

[Steffen Trumtrar]

On 2023-04-11 at 10:30 +02, Steffen Trumtrar <s.trumtrar at pengutronix.de> wrote:

> Hi,
>
> this is the eighth installement of my series for adding support for the
> Phytec STM32MP1-based SoM and board.
>
> Phytec itself calls the board "Phycore STM32MP1-3" and has other
> endnumbers. I only have access to the "-3" and that's what this series
> adds.
>
>     Changes since v7:
>       - remove unused gpu_reservde memory range
>       - get rid of duplicate ethernet clock assignments
>       - remove secure-status for sdmmc
>
>     Changes since v6:
>       - rename mdio0->mdio
>
>     Changes since v5:
>       - add reviewed/acked-by
>       - cleanup dt_bindings_check warnings
>
>     Changes since v4:
>       - cleanup usage of "status = okay|disabled"
>       - fix remaining non-generic node names
>       - rework sai nodes to not duplicate the existing settings in stm32mp151.dtsi
>
>     Changes since v3:
>       - cleanup board-compatible
>       - cleanup aliases
>       - rename nodes according to schema
>       - use interrupt flag
>
> Steffen Trumtrar (10):
>   ARM: dts: stm32: Add alternate pinmux for ethernet
>   ARM: dts: stm32: Add alternate pinmux for sai2b
>   ARM: dts: stm32: Add new pinmux for sdmmc1_b4
>   ARM: dts: stm32: Add new pinmux for sdmmc2_d47
>   ARM: dts: stm32: Add pinmux for USART1 pins
>   ARM: dts: stm32: Add idle/sleep pinmux for USART3
>   ARM: dts: stm32: Add sleep pinmux for SPI1 pins_a
>   dt-bindings: arm: stm32: Add Phytec STM32MP1 board
>   ARM: dts: stm32: add STM32MP1-based Phytec SoM
>   ARM: dts: stm32: add STM32MP1-based Phytec board
>
>  .../devicetree/bindings/arm/stm32/stm32.yaml  |   6 +
>  arch/arm/boot/dts/Makefile                    |   3 +-
>  arch/arm/boot/dts/stm32mp15-pinctrl.dtsi      | 231 +++++++
>  .../dts/stm32mp157c-phycore-stm32mp1-3.dts    |  60 ++
>  .../stm32mp157c-phycore-stm32mp15-som.dtsi    | 577 ++++++++++++++++++
>  5 files changed, 876 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
>  create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi

Gentle ping. Anything I need to fix?

Best regards,
Steffen

--
Pengutronix e.K.                | Dipl.-Inform. Steffen Trumtrar |
Steuerwalder Str. 21            | https://www.pengutronix.de/    |
31137 Hildesheim, Germany       | Phone: +49-5121-206917-0       |
Amtsgericht Hildesheim, HRA 2686| Fax:   +49-5121-206917-5555    |