[syzbot] upstream boot error: BUG: unable to handle kernel paging request in gpiod_set_value

Tue May 2 03:51:09 PDT 2023

On Tue, 2 May 2023 at 11:52, syzbot
<syzbot+5e3c3df60302959ef641 at syzkaller.appspotmail.com> wrote:
>
> Hello,
>
> syzbot found the following issue on:
>
> HEAD commit:    865fdb08197e Merge tag 'input-for-v6.4-rc0' of git://git.k..
> git tree:       upstream
> console output: https://syzkaller.appspot.com/x/log.txt?x=16481bf8280000
> kernel config:  https://syzkaller.appspot.com/x/.config?x=d43eae746231feb3
> dashboard link: https://syzkaller.appspot.com/bug?extid=5e3c3df60302959ef641
> compiler:       arm-linux-gnueabi-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
> userspace arch: arm
>
> IMPORTANT: if you fix the issue, please add the following tag to the commit:
> Reported-by: syzbot+5e3c3df60302959ef641 at syzkaller.appspotmail.com

+arm mailing list

Kernel started falling apart on arm during boot in various strange ways.

#syz set subsystems: arm

> Movable zone start for each node
> Early memory node ranges
>   node   0: [mem 0x0000000080000000-0x00000000ffffffff]
> Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
> percpu: Embedded 19 pages/cpu s47048 r8192 d22584 u77824
> Kernel command line: root=/dev/vda console=ttyAMA0  earlyprintk=serial net.ifnames=0 sysctl.kernel.hung_task_all_cpu_backtrace=1 ima_policy=tcb nf-conntrack-ftp.ports=20000 nf-conntrack-tftp.ports=20000 nf-conntrack-sip.ports=20000 nf-conntrack-irc.ports=20000 nf-conntrack-sane.ports=20000 binder.debug_mask=0 rcupdate.rcu_expedited=1 rcupdate.rcu_cpu_stall_cputime=1 no_hash_pointers page_owner=on sysctl.vm.nr_hugepages=4 sysctl.vm.nr_overcommit_hugepages=4 secretmem.enable=1 sysctl.max_rcu_stall_to_panic=1 msr.allow_writes=off coredump_filter=0xffff root=/dev/vda console=ttyAMA0 vmalloc=512M smp.csd_lock_timeout=300000 watchdog_thresh=165 workqueue.watchdog_thresh=420 sysctl.net.core.netdev_unregister_timeout_secs=420 dummy_hcd.num=2 panic_on_warn=1
> Unknown kernel command line parameters "earlyprintk=serial page_owner=on", will be passed to user space.
> Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes, linear)
> Inode-cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
> Built 1 zonelists, mobility grouping on.  Total pages: 520868
> allocated 2097152 bytes of page_ext
> mem auto-init: stack:off, heap alloc:on, heap free:off
> software IO TLB: area num 2.
> software IO TLB: mapped [mem 0x00000000d9a47000-0x00000000dda47000] (64MB)
> Memory: 1952316K/2097152K available (24576K kernel code, 2364K rwdata, 8404K rodata, 2048K init, 868K bss, 128452K reserved, 16384K cma-reserved, 524288K highmem)
> SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
> trace event string verifier disabled
> rcu: Preemptible hierarchical RCU implementation.
> rcu:    RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
> rcu:    RCU callback double-/use-after-free debug is enabled.
>         All grace periods are expedited (rcu_expedited).
>         Trampoline variant of Tasks RCU enabled.
>         Tracing variant of Tasks RCU enabled.
> rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
> rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
> NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> GIC physical location is 0x2c001000
> rcu: srcu_init: Setting srcu_struct sizes based on contention.
> sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
> clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
> arch_timer: cp15 timer(s) running at 62.50MHz (virt).
> clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
> sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns
> Switching to timer-based delay loop, resolution 16ns
> Console: colour dummy device 80x30
> Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
> pid_max: default: 32768 minimum: 301
> LSM: initializing lsm=lockdown,capability,landlock,yama,safesetid,tomoyo,selinux,bpf,integrity
> landlock: Up and running.
> Yama: becoming mindful.
> TOMOYO Linux initialized
> SELinux:  Initializing.
> LSM support for eBPF active
> stackdepot: allocating hash table of 131072 entries via kvcalloc
> Mount-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
> Mountpoint-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
> CPU: Testing write buffer coherency: ok
> CPU0: Spectre BHB: enabling loop workaround for all CPUs
> CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> 8<--- cut here ---
> Unable to handle kernel paging request at virtual address 000c01f3 when read
> [000c01f3] *pgd=80000080004003, *pmd=00000000
> Internal error: Oops: 206 [#1] PREEMPT SMP ARM
> Modules linked in:
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.3.0-syzkaller #0
> Hardware name: ARM-Versatile Express
> PC is at gpiod_set_value+0x38/0xc0 drivers/gpio/gpiolib.c:3222
> LR is at gpio_led_set+0x5c/0x60 drivers/leds/leds-gpio.c:54
> pc : [<80891a24>]    lr : [<8107f408>]    psr: 20000113
> sp : 82601e90  ip : 82601ea8  fp : 82601ea4
> r10: 00000000  r9 : 827e16e6  r8 : 00000001
> r7 : dddd1798  r6 : 000000ff  r5 : 00000001  r4 : 835c27a8
> r3 : 000c0193  r2 : 8107f3ac  r1 : 00000001  r0 : 83194800
> Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
> Control: 30c5387d  Table: 80003000  DAC: fffffffd
> Register r0 information: slab kmalloc-1k start 83194800 pointer offset 0 size 1024
> Register r1 information: non-paged memory
> Register r2 information: non-slab/vmalloc memory
> Register r3 information: non-paged memory
> Register r4 information: slab kmalloc-192 start 835c2780 pointer offset 40 size 192
> Register r5 information: non-paged memory
> Register r6 information: non-paged memory
> Register r7 information:
> 8<--- cut here ---
> Unable to handle kernel paging request at virtual address df943ff8 when read
> [df943ff8] *pgd=80000080007003, *pmd=83093003, *pte=802160e880216664
> Internal error: Oops: 207 [#2] PREEMPT SMP ARM
> Modules linked in:
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.3.0-syzkaller #0
> Hardware name: ARM-Versatile Express
> PC is at __find_vmap_area mm/vmalloc.c:841 [inline]
> PC is at find_vmap_area mm/vmalloc.c:1862 [inline]
> PC is at find_vm_area mm/vmalloc.c:2623 [inline]
> PC is at vmalloc_dump_obj+0x38/0xb4 mm/vmalloc.c:4221
> LR is at __raw_spin_lock include/linux/spinlock_api_smp.h:132 [inline]
> LR is at _raw_spin_lock+0x18/0x58 kernel/locking/spinlock.c:154
> pc : [<8047a1f0>]    lr : [<818016fc>]    psr: a0000193
> sp : 82601cf8  ip : 82601ce0  fp : 82601d0c
> r10: 8261ae40  r9 : 8261c9a4  r8 : 8285041c
> r7 : 60000113  r6 : 00000008  r5 : dddd2000  r4 : df944000
> r3 : 00000000  r2 : 0000215b  r1 : 00000000  r0 : 00000001
> Flags: NzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
> Control: 30c5387d  Table: 80003000  DAC: fffffffd
>
>
> ---
> This report is generated by a bot. It may contain errors.
> See https://goo.gl/tpsmEJ for more information about syzbot.
> syzbot engineers can be reached at syzkaller at googlegroups.com.
>
> syzbot will keep track of this issue. See:
> https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
>
> If the bug is already fixed, let syzbot know by replying with:
> #syz fix: exact-commit-title
>
> If you want to change bug's subsystems, reply with:
> #syz set subsystems: new-subsystem
> (See the list of subsystem names on the web dashboard)
>
> If the bug is a duplicate of another bug, reply with:
> #syz dup: exact-subject-of-another-report
>
> If you want to undo deduplication, reply with:
> #syz undup
>
> --
> You received this message because you are subscribed to the Google Groups "syzkaller-bugs" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to syzkaller-bugs+unsubscribe at googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/syzkaller-bugs/00000000000065594605fab2e72c%40google.com.