[PATCH 7/7] spi: stm32: add support for stm32h7 SPI slave underrun detection
Alain Volmat
alain.volmat at foss.st.com
Tue May 2 00:20:58 PDT 2023
Hi Valentin,
thanks.
On Fri, Apr 28, 2023 at 02:15:24PM +0200, Valentin Caron wrote:
> If stm32h7 SPI controller is in slave role and TX FIFO is abnormally empty
> during transaction, controller is able to automatically send either a
> pattern, the last transmitted data, or the last received data.
>
> Signed-off-by: Valentin Caron <valentin.caron at foss.st.com>
> ---
> drivers/spi/spi-stm32.c | 112 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 112 insertions(+)
>
> diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
> index 2db6f93654d7..0063c2f69265 100644
> --- a/drivers/spi/spi-stm32.c
> +++ b/drivers/spi/spi-stm32.c
> @@ -18,6 +18,7 @@
> #include <linux/pm_runtime.h>
> #include <linux/reset.h>
> #include <linux/spi/spi.h>
> +#include <dt-bindings/spi/spi-stm32.h>
>
> #define DRIVER_NAME "spi_stm32"
>
> @@ -84,6 +85,7 @@
> #define STM32H7_SPI_IFCR 0x18
> #define STM32H7_SPI_TXDR 0x20
> #define STM32H7_SPI_RXDR 0x30
> +#define STM32H7_SPI_UDRDR 0x4C
> #define STM32H7_SPI_I2SCFGR 0x50
>
> /* STM32H7_SPI_CR1 bit fields */
> @@ -101,6 +103,14 @@
> /* STM32H7_SPI_CFG1 bit fields */
> #define STM32H7_SPI_CFG1_DSIZE GENMASK(4, 0)
> #define STM32H7_SPI_CFG1_FTHLV GENMASK(8, 5)
> +#define STM32H7_SPI_CFG1_UDRDET GENMASK(12, 11)
> +#define STM32H7_SPI_CFG1_UDRDET_BEGIN 0
> +#define STM32H7_SPI_CFG1_UDRDET_LAST 1
> +#define STM32H7_SPI_CFG1_UDRDET_SS 2
> +#define STM32H7_SPI_CFG1_UDRCFG GENMASK(10, 9)
> +#define STM32H7_SPI_CFG1_UDRCFG_PTRN 0
> +#define STM32H7_SPI_CFG1_UDRCFG_LAST_R 1
> +#define STM32H7_SPI_CFG1_UDRCFG_LAST_T 2
> #define STM32H7_SPI_CFG1_RXDMAEN BIT(14)
> #define STM32H7_SPI_CFG1_TXDMAEN BIT(15)
> #define STM32H7_SPI_CFG1_MBR GENMASK(30, 28)
> @@ -126,6 +136,7 @@
> #define STM32H7_SPI_IER_DXPIE BIT(2)
> #define STM32H7_SPI_IER_EOTIE BIT(3)
> #define STM32H7_SPI_IER_TXTFIE BIT(4)
> +#define STM32H7_SPI_IER_UDRIE BIT(5)
> #define STM32H7_SPI_IER_OVRIE BIT(6)
> #define STM32H7_SPI_IER_MODFIE BIT(9)
> #define STM32H7_SPI_IER_ALL GENMASK(10, 0)
> @@ -134,6 +145,7 @@
> #define STM32H7_SPI_SR_RXP BIT(0)
> #define STM32H7_SPI_SR_TXP BIT(1)
> #define STM32H7_SPI_SR_EOT BIT(3)
> +#define STM32H7_SPI_SR_UDR BIT(5)
> #define STM32H7_SPI_SR_OVR BIT(6)
> #define STM32H7_SPI_SR_MODF BIT(9)
> #define STM32H7_SPI_SR_SUSP BIT(11)
> @@ -239,6 +251,8 @@ struct stm32_spi;
> * @baud_rate_div_max: maximum baud rate divisor
> * @has_fifo: boolean to know if fifo is used for driver
> * @flags: compatible specific SPI controller flags used at registration time
> + * @set_slave_udr: routine to configure registers to desired slave underrun
> + * behavior (if driver has this functionality)
> */
> struct stm32_spi_cfg {
> const struct stm32_spi_regspec *regs;
> @@ -260,6 +274,7 @@ struct stm32_spi_cfg {
> unsigned int baud_rate_div_max;
> bool has_fifo;
> u16 flags;
> + void (*set_slave_udr)(struct stm32_spi *spi);
> };
>
> /**
> @@ -288,6 +303,8 @@ struct stm32_spi_cfg {
> * @dma_rx: dma channel for RX transfer
> * @phys_addr: SPI registers physical base address
> * @slave_mode: the controller is configured as SPI slave
> + * @slave_udr_mode: slave underrun behavior
> + * @slave_udr_pattern: slave underrun pattern parameter
> */
> struct stm32_spi {
> struct device *dev;
> @@ -317,6 +334,8 @@ struct stm32_spi {
> dma_addr_t phys_addr;
>
> bool slave_mode;
> + u32 slave_udr_mode;
> + u32 slave_udr_pattern;
> };
>
> static const struct stm32_spi_regspec stm32f4_spi_regspec = {
> @@ -921,6 +940,14 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
> end = true;
> }
>
> + if (sr & STM32H7_SPI_SR_UDR) {
> + static DEFINE_RATELIMIT_STATE(rs,
> + DEFAULT_RATELIMIT_INTERVAL * 10,
> + 1);
> + if (__ratelimit(&rs))
> + dev_dbg_ratelimited(spi->dev, "Underrun detected\n");
> + }
> +
> if (sr & STM32H7_SPI_SR_EOT) {
> if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
> stm32h7_spi_read_rxfifo(spi);
> @@ -1178,6 +1205,9 @@ static int stm32h7_spi_transfer_one_irq(struct stm32_spi *spi)
> if (spi->tx_buf)
> stm32h7_spi_write_txfifo(spi);
>
> + if (STM32_SPI_SLAVE_MODE(spi) && spi->slave_udr_mode != SPI_NO_ACTION)
> + ier |= STM32H7_SPI_IER_UDRIE;
> +
> if (STM32_SPI_MASTER_MODE(spi))
> stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_CSTART);
>
> @@ -1222,6 +1252,9 @@ static void stm32h7_spi_transfer_one_dma_start(struct stm32_spi *spi)
> if (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX)
> ier |= STM32H7_SPI_IER_EOTIE | STM32H7_SPI_IER_TXTFIE;
>
> + if (STM32_SPI_SLAVE_MODE(spi) && spi->slave_udr_mode != SPI_NO_ACTION)
> + ier |= STM32H7_SPI_IER_UDRIE;
> +
> stm32_spi_set_bits(spi, STM32H7_SPI_IER, ier);
>
> stm32_spi_enable(spi);
> @@ -1530,6 +1563,53 @@ static int stm32h7_spi_number_of_data(struct stm32_spi *spi, u32 nb_words)
> return 0;
> }
>
> +/**
> + * stm32h7_spi_set_slave_udr - configure slave underrun detection and reaction
> + * @spi: pointer to the spi controller data structure
> + */
> +static void stm32h7_spi_set_slave_udr(struct stm32_spi *spi)
> +{
> + u32 max_udr_ptrn, udr_ptrn, cfg1_setb = 0;
> +
> + if (spi->slave_udr_mode == SPI_NO_ACTION)
> + return;
> +
> + switch (spi->slave_udr_mode) {
> + case SPI_SEND_PATTERN:
> + max_udr_ptrn = (1 << spi->cur_bpw) - 1;
> + if (spi->slave_udr_pattern > max_udr_ptrn) {
> + udr_ptrn = spi->slave_udr_pattern & max_udr_ptrn;
> + dev_warn(spi->dev,
> + "force slave underrun pattern to data width (> 0x%x, set 0x%x)\n",
> + max_udr_ptrn, udr_ptrn);
> + } else {
> + udr_ptrn = spi->slave_udr_pattern;
> + dev_dbg(spi->dev, "spi slave underrun: send pattern (0x%x)\n",
> + spi->slave_udr_pattern);
> + }
> + writel_relaxed(udr_ptrn, spi->base + STM32H7_SPI_UDRDR);
> + cfg1_setb |= FIELD_PREP(STM32H7_SPI_CFG1_UDRCFG, STM32H7_SPI_CFG1_UDRCFG_PTRN);
> + break;
> + case SPI_REPEAT_LAST_RECEIVED_DATA:
> + cfg1_setb |= FIELD_PREP(STM32H7_SPI_CFG1_UDRCFG, STM32H7_SPI_CFG1_UDRCFG_LAST_R);
> + dev_dbg(spi->dev, "spi slave underrun: repeat received data\n");
> + break;
> + case SPI_REPEAT_LAST_TRANSMITTED_DATA:
> + cfg1_setb |= FIELD_PREP(STM32H7_SPI_CFG1_UDRCFG, STM32H7_SPI_CFG1_UDRCFG_LAST_T);
> + dev_dbg(spi->dev, "spi slave underrun: repeat transmitted data\n");
> + break;
> + default:
> + dev_warn(spi->dev, "slave underrun detection disabled\n");
> + spi->slave_udr_mode = SPI_NO_ACTION;
> + }
> +
> + if (spi->slave_udr_mode != SPI_NO_ACTION) {
> + cfg1_setb |= FIELD_PREP(STM32H7_SPI_CFG1_UDRDET, STM32H7_SPI_CFG1_UDRDET_LAST);
> +
> + stm32_spi_set_bits(spi, STM32H7_SPI_CFG1, cfg1_setb);
> + }
> +}
> +
> /**
> * stm32_spi_transfer_one_setup - common setup to transfer a single
> * spi_transfer either using DMA or
> @@ -1591,6 +1671,9 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
> goto out;
> }
>
> + if (STM32_SPI_SLAVE_MODE(spi) && spi->cfg->set_slave_udr)
> + spi->cfg->set_slave_udr(spi);
> +
> dev_dbg(spi->dev, "transfer communication mode set to %d\n",
> spi->cur_comm);
> dev_dbg(spi->dev,
> @@ -1774,6 +1857,7 @@ static const struct stm32_spi_cfg stm32h7_spi_cfg = {
> .baud_rate_div_min = STM32H7_SPI_MBR_DIV_MIN,
> .baud_rate_div_max = STM32H7_SPI_MBR_DIV_MAX,
> .has_fifo = true,
> + .set_slave_udr = stm32h7_spi_set_slave_udr,
> };
>
> static const struct of_device_id stm32_spi_of_match[] = {
> @@ -1789,6 +1873,31 @@ static int stm32h7_spi_slave_abort(struct spi_controller *ctrl)
> return 0;
> }
>
> +static void stm32h7_spi_parse_slave_config(struct stm32_spi *spi, struct device_node *np)
> +{
> + u32 udr_configs[2] = { 0, 0 };
> + int count, ret;
> +
> + count = of_property_count_elems_of_size(np, "st,spi-slave-underrun", sizeof(u32));
> + if (count <= 0) {
> + if (count != -EINVAL)
> + dev_err(spi->dev, "Invalid st,spi-slave-underrun property\n");
> + return;
> + }
> +
> + ret = of_property_read_u32_array(np, "st,spi-slave-underrun", udr_configs, count);
> + if (ret)
> + return;
> +
> + spi->slave_udr_mode = udr_configs[0];
> + if (spi->slave_udr_mode == SPI_SEND_PATTERN) {
> + if (count > 1)
> + spi->slave_udr_pattern = udr_configs[1];
> + else
> + dev_warn(spi->dev, "Missing pattern in st,spi-slave-underrun property\n");
> + }
> +}
> +
> static int stm32_spi_probe(struct platform_device *pdev)
> {
> struct spi_controller *ctrl;
> @@ -1842,6 +1951,9 @@ static int stm32_spi_probe(struct platform_device *pdev)
> return ret;
> }
>
> + if (STM32_SPI_SLAVE_MODE(spi))
> + stm32h7_spi_parse_slave_config(spi, np);
> +
> spi->clk = devm_clk_get(&pdev->dev, NULL);
> if (IS_ERR(spi->clk)) {
> ret = PTR_ERR(spi->clk);
> --
> 2.25.1
>
Acked-by: Alain Volmat <alain.volmat at foss.st.com>
Regards,
Alain
More information about the linux-arm-kernel
mailing list