[PATCH v3 1/3] spi: s3c64xx: change polling mode to optional

[Jaewon Kim]

Previously, Polling mode was supported as quirk for SOC without DMA.
To provide more flexible support for polling mode, it changed to polling
mode when the 'dmas' property is not present in the devicetree, rather than
using a quirk.

Signed-off-by: Jaewon Kim <jaewon02.kim at samsung.com>
---
 drivers/spi/spi-s3c64xx.c                 | 4 ++--
 include/linux/platform_data/spi-s3c64xx.h | 1 +
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 71d324ec9a70..66ac94022a1b 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -19,7 +19,6 @@
 #include <linux/platform_data/spi-s3c64xx.h>
 
 #define MAX_SPI_PORTS		12
-#define S3C64XX_SPI_QUIRK_POLL		(1 << 0)
 #define S3C64XX_SPI_QUIRK_CS_AUTO	(1 << 1)
 #define AUTOSUSPEND_TIMEOUT	2000
 
@@ -116,7 +115,7 @@
 #define S3C64XX_SPI_TRAILCNT		S3C64XX_SPI_MAX_TRAILCNT
 
 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
-#define is_polling(x)	(x->port_conf->quirks & S3C64XX_SPI_QUIRK_POLL)
+#define is_polling(x)	(x->cntrlr_info->polling)
 
 #define RXBUSY    (1<<2)
 #define TXBUSY    (1<<3)
@@ -1068,6 +1067,7 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev)
 	}
 
 	sci->no_cs = of_property_read_bool(dev->of_node, "no-cs-readback");
+	sci->polling = !of_property_present(dev->of_node, "dmas");
 
 	return sci;
 }
diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h
index 5df1ace6d2c9..cb7b8ddc899f 100644
--- a/include/linux/platform_data/spi-s3c64xx.h
+++ b/include/linux/platform_data/spi-s3c64xx.h
@@ -35,6 +35,7 @@ struct s3c64xx_spi_info {
 	int src_clk_nr;
 	int num_cs;
 	bool no_cs;
+	bool polling;
 	int (*cfg_gpio)(void);
 };
 
-- 
2.17.1