[PATCH v2 2/4] dt-bindings: net: can: Add poll-interval for MCAN

[Mendez, Judith]

Hello Krzysztof,

On 5/1/2023 2:16 AM, Krzysztof Kozlowski wrote:
> On 28/04/2023 18:17, Mendez, Judith wrote:
>> Hello Rob,
>>
>> On 4/24/2023 7:13 PM, Rob Herring wrote:
>>>
>>> On Mon, 24 Apr 2023 14:54:00 -0500, Judith Mendez wrote:
>>>> On AM62x SoC, MCANs on MCU domain do not have hardware interrupt
>>>> routed to A53 Linux, instead they will use software interrupt by
>>>> hrtimer. To enable timer method, interrupts should be optional so
>>>> remove interrupts property from required section and introduce
>>>> poll-interval property.
>>>>
>>>> Signed-off-by: Judith Mendez <jm at ti.com>
>>>> ---
>>>> Changelog:
>>>> v2:
>>>>     1. Add poll-interval property to enable timer polling method
>>>>     2. Add example using poll-interval property
>>>>
>>>>    .../bindings/net/can/bosch,m_can.yaml         | 26 ++++++++++++++++---
>>>>    1 file changed, 23 insertions(+), 3 deletions(-)
>>>>
>>>
>>> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
>>> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>>>
>>> yamllint warnings/errors:
>>>
>>> dtschema/dtc warnings/errors:
>>> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml: 'example with interrupts' is not one of ['$id', '$schema', 'title', 'description', 'examples', 'required', 'allOf', 'anyOf', 'oneOf', 'definitions', '$defs', 'additionalProperties', 'dependencies', 'dependentRequired', 'dependentSchemas', 'patternProperties', 'properties', 'not', 'if', 'then', 'else', 'unevaluatedProperties', 'deprecated', 'maintainers', 'select', '$ref']
>>> 	from schema $id: http://devicetree.org/meta-schemas/base.yaml#
>>> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml: 'example with timer polling' is not one of ['$id', '$schema', 'title', 'description', 'examples', 'required', 'allOf', 'anyOf', 'oneOf', 'definitions', '$defs', 'additionalProperties', 'dependencies', 'dependentRequired', 'dependentSchemas', 'patternProperties', 'properties', 'not', 'if', 'then', 'else', 'unevaluatedProperties', 'deprecated', 'maintainers', 'select', '$ref']
>>> 	from schema $id: http://devicetree.org/meta-schemas/base.yaml#
>>>
>>> doc reference errors (make refcheckdocs):
>>>
>>> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230424195402.516-3-jm@ti.com
>>>
>>> The base for the series is generally the latest rc1. A different dependency
>>> should be noted in *this* patch.
>>>
>>> If you already ran 'make dt_binding_check' and didn't see the above
>>> error(s), then make sure 'yamllint' is installed and dt-schema is up to
>>> date:
>>>
>>> pip3 install dtschema --upgrade
>>>
>>> Please check and re-submit after running the above command yourself. Note
>>> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
>>> your schema. However, it must be unset to test all examples with your schema.
>>
>> Thanks Rob, I was not getting the errors, but I have fixed now. Thanks.
> 
> There is no way your code have worked, so either you did not test it or
> your setup misses something. In both cases you would see errors, so
> please check what went wrong.

Will do, thanks for taking the time to check the patch for errors.

regards,
Judith