[PATCH V4 5/6] ARM: dts: imx6ull: Add chargebyte Tarragon support
Stefan Wahren
stefan.wahren at chargebyte.com
Fri Mar 31 14:08:39 PDT 2023
This adds the support for chargebyte Tarragon, which is an Electrical
Vehicle Supply Equipment (EVSE) for AC charging stations
(according to IEC 61851, ISO 15118).
The Tarragon board is based on an i.MX6ULL SoC and is available in
4 variants (Master, Slave, SlaveXT, Micro), which provide more or
less peripherals.
Supported features:
* 512 MB DDR RAM
* eMMC
* Debug UART
* 100 Mbit Ethernet
* USB 2.0 Host interface
* Powerline communication (QCA700x)
* 2x RS485
* Digital in- and outputs (12 V)
* One-Wire master for external temp sensors
* 2x relay outputs
* 2x motor interfaces
Link: https://chargebyte.com/products/charging-station-communication/charge-control-c
Signed-off-by: Stefan Wahren <stefan.wahren at chargebyte.com>
---
arch/arm/boot/dts/Makefile | 4 +
.../arm/boot/dts/imx6ull-tarragon-common.dtsi | 852 ++++++++++++++++++
arch/arm/boot/dts/imx6ull-tarragon-master.dts | 82 ++
arch/arm/boot/dts/imx6ull-tarragon-micro.dts | 10 +
arch/arm/boot/dts/imx6ull-tarragon-slave.dts | 32 +
.../arm/boot/dts/imx6ull-tarragon-slavext.dts | 64 ++
6 files changed, 1044 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6ull-tarragon-common.dtsi
create mode 100644 arch/arm/boot/dts/imx6ull-tarragon-master.dts
create mode 100644 arch/arm/boot/dts/imx6ull-tarragon-micro.dts
create mode 100644 arch/arm/boot/dts/imx6ull-tarragon-slave.dts
create mode 100644 arch/arm/boot/dts/imx6ull-tarragon-slavext.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index fd4f7230cb55..404e6f5a1cc7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -760,6 +760,10 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ull-phytec-segin-lc-rdk-nand.dtb \
imx6ull-phytec-tauri-emmc.dtb \
imx6ull-phytec-tauri-nand.dtb \
+ imx6ull-tarragon-master.dtb \
+ imx6ull-tarragon-micro.dtb \
+ imx6ull-tarragon-slave.dtb \
+ imx6ull-tarragon-slavext.dtb \
imx6ull-tqma6ull2-mba6ulx.dtb \
imx6ull-tqma6ull2l-mba6ulx.dtb \
imx6ulz-14x14-evk.dtb \
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi b/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi
new file mode 100644
index 000000000000..3fdece5bd31f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi
@@ -0,0 +1,852 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx6ull.dtsi"
+
+/ {
+ aliases {
+ mmc0 = &usdhc2; /* eMMC */
+ };
+
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ pinctrl-0 = <&pinctrl_emmc_rst>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_dcdc_3v3: regulator-dcdc-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "dcdc-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "ldo-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_status_leds>;
+
+ led-1 {
+ function = LED_FUNCTION_BOOT;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "timer";
+ };
+
+ led-2 {
+ function = LED_FUNCTION_PROGRAMMING;
+ color = <LED_COLOR_ID_YELLOW>;
+ gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-3 {
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&adc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc_motor
+ &pinctrl_adc_cp
+ &pinctrl_adc_pp>;
+ vref-supply = <&vgen1_reg>;
+ status = "okay";
+};
+
+&cpu0 {
+ clock-frequency = <792000000>;
+};
+
+&ecspi2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ num-cs = <3>;
+ cs-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH
+ &gpio3 2 GPIO_ACTIVE_HIGH
+ &gpio3 4 GPIO_ACTIVE_HIGH>;
+};
+
+&ecspi4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi4>;
+ num-cs = <1>;
+ cs-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1
+ &pinctrl_enet1_phy_rst
+ &pinctrl_enet_mdio>;
+ phy-supply = <®_dcdc_3v3>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <25>;
+ phy-handle = <ðphy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy at 0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1_phy_int>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ interrupts-extended = <&gpio2 7 IRQ_TYPE_EDGE_FALLING>;
+ clocks = <&clks IMX6UL_CLK_ENET_REF>;
+ clock-names = "rmii-ref";
+ max-speed = <100>;
+ smsc,disable-energy-detect;
+ };
+ };
+};
+
+&gpio1 {
+ gpio-line-names = "", /* 0 */
+ "",
+ "",
+ "",
+ "",
+ "", /* 5 */
+ "",
+ "",
+ "",
+ "",
+ "", /* 10 */
+ "",
+ "",
+ "CP_INVERT",
+ "",
+ "", /* 15 */
+ "",
+ "",
+ "",
+ "MOTOR_1_FAULT_N",
+ "", /* 20 */
+ "",
+ "ROTARY_SWITCH_1_2_N",
+ "ROTARY_SWITCH_1_4_N",
+ "ROTARY_SWITCH_1_8_N",
+ "MOTOR_2_FAULT_N"; /* 25 */
+};
+
+&gpio3 {
+ gpio-line-names = "", /* 0 */
+ "",
+ "",
+ "",
+ "",
+ "", /* 5 */
+ "EXT_GPIO",
+ "MOTOR_1_DRIVER_IN1_N",
+ "MOTOR_1_DRIVER_IN2",
+ "MOTOR_2_DRIVER_IN1",
+ "STM32_BOOT0", /* 10 */
+ "STM32_RST_N",
+ "RELAY_1_ENABLE",
+ "RELAY_2_ENABLE",
+ "",
+ "", /* 15 */
+ "QCA700X_MAINS_BOOTLOADER_N",
+ "QCA700X_CP_RST_N",
+ "QCA700X_CP_BOOTLOADER_N",
+ "",
+ "DIGITAL_OUT_1", /* 20 */
+ "DIGITAL_OUT_2",
+ "DIGITAL_OUT_3",
+ "DIGITAL_OUT_4",
+ "DIGITAL_OUT_5",
+ "DIGITAL_OUT_6", /* 25 */
+ "ROTARY_SWITCH_2_8_N",
+ "ROTARY_SWITCH_2_4_N",
+ "ROTARY_SWITCH_2_2_N";
+};
+
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+
+ gpio-line-names = "", /* 0 */
+ "",
+ "",
+ "",
+ "",
+ "", /* 5 */
+ "",
+ "",
+ "",
+ "",
+ "", /* 10 */
+ "",
+ "",
+ "BOARD_VARIANT_1",
+ "BOARD_VARIANT_2",
+ "BOARD_VARIANT_0", /* 15 */
+ "BOARD_VARIANT_3",
+ "",
+ "ROTARY_SWITCH_2_1_N",
+ "",
+ "DIGITAL_IN_5", /* 20 */
+ "",
+ "",
+ "DIGITAL_IN_6",
+ "",
+ "DIGITAL_IN_1", /* 25 */
+ "DIGITAL_IN_2",
+ "DIGITAL_IN_4",
+ "DIGITAL_IN_3";
+
+ pmic-int-hog {
+ gpio-hog;
+ gpios = <19 0>;
+ input;
+ };
+};
+
+&gpio5 {
+ gpio-line-names = "ROTARY_SWITCH_1_1_N", /* 0 */
+ "",
+ "RELAY_2_SENSE",
+ "RELAY_1_SENSE",
+ "",
+ "", /* 5 */
+ "",
+ "QCA700X_MAINS_RST_N",
+ "MOTOR_2_DRIVER_IN2",
+ "",
+ "CP_POSITIVE_PEAK_RST", /* 10 */
+ "CP_NEGATIVE_PEAK_RST";
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_gpio>;
+ scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ pfuze3001: pmic at 8 {
+ compatible = "fsl,pfuze3001";
+ reg = <0x08>;
+
+ regulators {
+ sw1_reg: sw1 {
+ regulator-name = "SW1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-name = "SW2";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: sw3 {
+ regulator-name = "SW3";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-name = "VSNVS";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-name = "VLDO1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-name = "VLDO2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-name = "VCCSD";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-name = "V33";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-name = "VLDO3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-name = "VLDO4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ onewire at 18 {
+ compatible = "maxim,ds2484";
+ reg = <0x18>;
+ };
+
+ accelerometer at 19 {
+ compatible = "st,iis328dq", "st,h3lis331dl-accel";
+ reg = <0x19>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_accelerometer_int1_snvs>;
+ vdd-supply = <®_dcdc_3v3>;
+ vddio-supply = <®_dcdc_3v3>;
+ st,drdy-int-pin = <1>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_board_var
+ &pinctrl_digital_input
+ &pinctrl_digital_output
+ &pinctrl_gpio_motor
+ &pinctrl_hog_pins
+ &pinctrl_rotary_switch1
+ &pinctrl_rotary_switch2>;
+
+ pinctrl_adc_cp: adc-cpgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
+ >;
+ };
+
+ pinctrl_adc_motor: adc-motorgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0xb0
+ MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
+ >;
+ };
+
+ pinctrl_adc_pp: adc-ppgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0xb0
+ >;
+ };
+
+ pinctrl_board_var: board-vargrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_CLE__GPIO4_IO15 0xb0
+ MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0xb0
+ MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0xb0
+ MX6UL_PAD_NAND_DQS__GPIO4_IO16 0xb0
+ >;
+ };
+
+ pinctrl_digital_input: digital-inputgrp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0xb0
+ MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0xb0
+ MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0xb0
+ MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0xb0
+ MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0xb0
+ MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0xb0
+ >;
+ };
+
+ pinctrl_digital_output: digital-outputgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x400000b0
+ MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x400000b0
+ MX6UL_PAD_LCD_DATA17__GPIO3_IO22 0x400000b0
+ MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x400000b0
+ MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x400000b0
+ MX6UL_PAD_LCD_DATA20__GPIO3_IO25 0x400000b0
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x10b0
+ MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0xb0
+ MX6UL_PAD_LCD_RESET__GPIO3_IO04 0xb0
+ MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x10b0
+ MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x10b0
+ MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x10b0
+ >;
+ };
+
+ pinctrl_ecspi4: ecspi4grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x10b0
+ MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK 0x10b0
+ MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO 0x10b0
+ MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI 0x10b0
+ >;
+ };
+
+ pinctrl_emmc_rst: emmc-rstgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x400010b0
+ >;
+ };
+
+ pinctrl_enet_mdio: enet-mdiogrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x10b0
+ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x10b0
+ >;
+ };
+
+ pinctrl_enet1_phy_int: enet1-phy-intgrp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x10b0
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x100b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x100b0
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x100b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x400000b1
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0xb0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0xb0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0xb0
+ >;
+ };
+
+ pinctrl_ext_uart: ext-uartgrp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX 0xb0
+ MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX 0xb0
+ >;
+ };
+
+ pinctrl_fan_enable: fan-enablegrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x400000b0
+ >;
+ };
+
+ pinctrl_gpio_motor: gpio-motorgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x400000b0
+ MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x400000b0
+ MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x400000b0
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0xb0
+ MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0xb0
+ >;
+ };
+
+ pinctrl_hog_pins: hog-pinsgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x400000b0
+ MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x400000b0
+ MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x400070a0
+ MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x400000b0
+ MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x400000b0
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x400008b0
+ MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x400008b0
+ >;
+ };
+
+ pinctrl_i2c4_gpio: i2c4-gpiogrp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x400008b0
+ MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x400008b0
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT 0x70b1
+ MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0xb0
+ >;
+ };
+
+ pinctrl_pwm_cp: pinctrl-pwm-cpgrp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x60a0
+ >;
+ };
+
+ pinctrl_pwm_digital_input_ref: pwm-digital-input-refgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0xb0
+ >;
+ };
+
+ pinctrl_pwm_fan: pwm-fangrp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x60a0
+ >;
+ };
+
+ pinctrl_qca700x_cp_btld: qca700x-cp-btldgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x400000b0
+ >;
+ };
+
+ pinctrl_qca700x_cp_int: qca700x-cp-intgrp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x10b0
+ >;
+ };
+
+ pinctrl_qca700x_cp_rst: qca700x-cp-rstgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x400000b0
+ >;
+ };
+
+ pinctrl_qca700x_mains_btld: qca700x-mains-btldgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x400000b0
+ >;
+ };
+
+ pinctrl_rotary_switch1: rotary-switch1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0xb0
+ MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0xb0
+ MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0xb0
+ >;
+ };
+
+ pinctrl_rotary_switch2: rotary-switch2grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0xb0
+ MX6UL_PAD_LCD_DATA23__GPIO3_IO28 0xb0
+ MX6UL_PAD_LCD_DATA22__GPIO3_IO27 0xb0
+ MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0xb0
+ >;
+ };
+
+ pinctrl_rs485_1: rs485-1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0xb0
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0xb0
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0xb0
+ >;
+ };
+
+ pinctrl_rs485_2: rs485-2grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x10b0
+ MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x10b0
+ MX6UL_PAD_CSI_DATA00__UART5_DCE_TX 0x10b0
+ >;
+ };
+
+ pinctrl_status_leds: status-ledsgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0xb0
+ MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0xb0
+ MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0xb0
+ >;
+ };
+
+ pinctrl_stm32: stm32grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX 0x10b0
+ MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX 0x10b0
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__UART4_DTE_RX 0xb0
+ MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX 0xb0
+ >;
+ };
+
+ pinctrl_usb: usbgrp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CLK__USB_OTG1_OC 0x70b0
+ MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID 0x70b0
+ >;
+ };
+
+ pinctrl_usb_pwr: usb-pwrgrp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USB_OTG1_PWR 0xb0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x7071
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x7071
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x7071
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x7071
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x7071
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x7071
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x7071
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x7071
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x7071
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x7071
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x70b1
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x70b1
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x70b1
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x70b1
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x70b1
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x70b1
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x70b1
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x70b1
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x70b1
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x70b1
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x70f1
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x70f1
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x70f1
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x70f1
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x70f1
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x70f1
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x70f1
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x70f1
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x70f1
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x70f1
+ >;
+ };
+
+ pinctrl_wdog2: wdoggrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B 0x10b0
+ >;
+ };
+};
+
+&iomuxc_snvs {
+ pinctrl-names = "default_snvs";
+ pinctrl-0 = <&pinctrl_cp_peak_snvs
+ &pinctrl_gpio_motor_snvs
+ &pinctrl_relay_sense_snvs
+ &pinctrl_rotary_switch1_snvs>;
+
+ pinctrl_accelerometer_int1_snvs: accelerometer-int1-snvsgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x130a0
+ >;
+ };
+
+ pinctrl_cp_peak_snvs: cp-peak-snvsgrp {
+ fsl,pins = <
+ MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x130a0
+ MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0
+ >;
+ };
+
+ pinctrl_enet1_phy_rst: enet1-phy-rstgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x100a0
+ >;
+ };
+
+ pinctrl_fan_sense_snvs: fan-sense-snvsgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x100a0
+ >;
+ };
+
+ pinctrl_gpio_motor_snvs: gpio-motor-snvsgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x110a0
+ >;
+ };
+
+ pinctrl_qca700x_mains_int: qca700x-mains-intgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x130a0
+ >;
+ };
+
+ pinctrl_qca700x_mains_rst: qca700x-mains-rstgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x400100a0
+ >;
+ };
+
+ pinctrl_relay_sense_snvs: relay-sense-snvsgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x100a0
+ MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x100a0
+ >;
+ };
+
+ pinctrl_rotary_switch1_snvs: rotary-switch1-snvsgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x110a0
+ >;
+ };
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm_digital_input_ref>;
+ status = "okay";
+};
+
+&pwm8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm_cp>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rs485_1>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ fsl,dte-mode;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rs485_2>;
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_stm32>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ext_uart>;
+ status = "okay";
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb
+ &pinctrl_usb_pwr>;
+ dr_mode = "host";
+ power-active-high;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbphy1 {
+ fsl,tx-cal-45-dn-ohms = <35>;
+ fsl,tx-cal-45-dp-ohms = <35>;
+};
+
+&usbphy2 {
+ fsl,tx-cal-45-dn-ohms = <35>;
+ fsl,tx-cal-45-dp-ohms = <35>;
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ vmmc-supply = <&sw2_reg>;
+ vqmmc-supply = <®_1v8>;
+ mmc-pwrseq = <&emmc_pwrseq>;
+ bus-width = <8>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ status = "okay";
+};
+
+&wdog1 {
+ status = "disabled";
+};
+
+&wdog2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog2>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-master.dts b/arch/arm/boot/dts/imx6ull-tarragon-master.dts
new file mode 100644
index 000000000000..67007ce383e3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tarragon-master.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+ model = "chargebyte Tarragon Master";
+ compatible = "chargebyte,imx6ull-tarragon-master", "fsl,imx6ull";
+
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fan_sense_snvs>;
+ fan-supply = <®_fan>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ reg_fan: regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "fan-supply";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fan_enable>;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+};
+
+&ecspi2 {
+ status = "okay";
+
+ qca700x_cp: ethernet at 0 {
+ reg = <0x0>;
+ compatible = "qca,qca7000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qca700x_cp_int
+ &pinctrl_qca700x_cp_rst
+ &pinctrl_qca700x_cp_btld>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+ spi-cpha;
+ spi-cpol;
+ spi-max-frequency = <16000000>;
+ };
+};
+
+&ecspi4 {
+ status = "okay";
+
+ qca700x_mains: ethernet at 0 {
+ reg = <0x0>;
+ compatible = "qca,qca7000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qca700x_mains_int
+ &pinctrl_qca700x_mains_rst
+ &pinctrl_qca700x_mains_btld>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+ spi-cpha;
+ spi-cpol;
+ spi-max-frequency = <16000000>;
+ };
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&pwm7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm_fan>;
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-micro.dts b/arch/arm/boot/dts/imx6ull-tarragon-micro.dts
new file mode 100644
index 000000000000..e471c2005bee
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tarragon-micro.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+ model = "chargebyte Tarragon Micro";
+ compatible = "chargebyte,imx6ull-tarragon-micro", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-slave.dts b/arch/arm/boot/dts/imx6ull-tarragon-slave.dts
new file mode 100644
index 000000000000..cee223b5f8e1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tarragon-slave.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+ model = "chargebyte Tarragon Slave";
+ compatible = "chargebyte,imx6ull-tarragon-slave", "fsl,imx6ull";
+};
+
+&ecspi2 {
+ status = "okay";
+
+ qca700x_cp: ethernet at 0 {
+ reg = <0x0>;
+ compatible = "qca,qca7000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qca700x_cp_int
+ &pinctrl_qca700x_cp_rst
+ &pinctrl_qca700x_cp_btld>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+ spi-cpha;
+ spi-cpol;
+ spi-max-frequency = <16000000>;
+ };
+};
+
+&fec1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts b/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts
new file mode 100644
index 000000000000..7fd53b7a4372
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+ model = "chargebyte Tarragon SlaveXT";
+ compatible = "chargebyte,imx6ull-tarragon-slavext", "fsl,imx6ull";
+
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fan_sense_snvs>;
+ fan-supply = <®_fan>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ reg_fan: regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "fan-supply";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fan_enable>;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+};
+
+&ecspi2 {
+ status = "okay";
+
+ qca700x_cp: ethernet at 0 {
+ reg = <0x0>;
+ compatible = "qca,qca7000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qca700x_cp_int
+ &pinctrl_qca700x_cp_rst
+ &pinctrl_qca700x_cp_btld>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+ spi-cpha;
+ spi-cpol;
+ spi-max-frequency = <16000000>;
+ };
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&pwm7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm_fan>;
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
--
2.17.1
More information about the linux-arm-kernel
mailing list