[PATCH v4 07/11] arm64: dts: mediatek: add usb controller support for mt8365-evk

Alexandre Mergnat amergnat at baylibre.com
Fri Mar 31 10:54:51 PDT 2023


This patch add support for SuperSpeed USB, in OTG mode, on micro connector.
It also add support for the Extensible Host Controller Interface USB.

Signed-off-by: Alexandre Mergnat <amergnat at baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
index 1c36d8f19525..9760f181eb34 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
@@ -314,6 +314,28 @@ &pwm {
 	status = "okay";
 };
 
+&ssusb {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+	pinctrl-0 = <&usb_pins>;
+	pinctrl-names = "default";
+	usb-role-switch;
+	vusb33-supply = <&mt6357_vusb33_reg>;
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		id-gpios = <&pio 17 GPIO_ACTIVE_HIGH>;
+		type = "micro";
+		vbus-supply = <&usb_otg_vbus>;
+	};
+};
+
+&usb_host {
+	vusb33-supply = <&mt6357_vusb33_reg>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-0 = <&uart0_pins>;
 	pinctrl-names = "default";

-- 
2.25.1




More information about the linux-arm-kernel mailing list