[PATCH v4 00/11] Improve the MT8365 SoC and EVK board support

[Kevin Hilman]

Alexandre Mergnat <amergnat at baylibre.com> writes:

> This commits are based on the Fabien Parent <fparent at baylibre.com> work.
>
> The purpose of this series is to add the following HWs / IPs support for
> the mt8365-evk board:
> - Watchdog
> - Power Management Integrated Circuit "PMIC" wrapper
>   - MT6357 PMIC
> - MultiMediaCard "MMC" & Secure Digital "SD" controller
> - USB controller
> - Ethernet MAC controller
>
> Add CPU Freq & IDLE support for this board.
>
> This series depends to anothers which add support for MT8365 EVK board
> [1] and the MT8365 I2C support [2]. Both are currently applied.
>
> The DTB check may failed/warn about pinctrl binding, but it should be
> fixed thanks to this serie [3]

It's not just the DTB check that that depends on the pinctrl binding
series.  Patch 2 of this series touches the pinctrl bindings, and does
not apply unless the pinctrl series is also applied.

IOW, I needed to apply [1], [2] and [3] to mainline in order to apply
this series.

After applying the dependencies, the kernel fails to build:

../arch/arm64/boot/dts/mediatek/mt8365-evk.dts:15:10: fatal error: mt6357.dtsi: No such file or directory
   15 | #include "mt6357.dtsi"
      |          ^~~~~~~~~~~~~
compilation terminated.                      

With lots of dependencies like this, it would be useful for you to push
a temporary branch on mainline where you've applied all the dependencies
so we can better see what the dependencies actually are.

Kevin