[PATCH net-next 14/15] net: dsa: mt7530: introduce driver for MT7988 built-in switch

[Arınç ÜNAL]

On 31.03.2023 16:18, Arınç ÜNAL wrote:
> On 31.03.2023 15:06, Arınç ÜNAL wrote:
>> On 31.03.2023 13:16, Daniel Golle wrote:
>>> On Fri, Mar 31, 2023 at 08:50:28AM +0300, Arınç ÜNAL wrote:
>>>> On 30.03.2023 18:23, Daniel Golle wrote:
>>>>> Add driver for the built-in Gigabit Ethernet switch which can be found
>>>>> in the MediaTek MT7988 SoC.
>>>>>
>>>>> The switch shares most of its design with MT7530 and MT7531, but has
>>>>> it's registers mapped into the SoCs register space rather than being
>>>>> connected externally or internally via MDIO.
>>>>>
>>>>> Introduce a new platform driver to support that.
>>>>>
>>>>> Signed-off-by: Daniel Golle <daniel at makrotopia.org>
>>>>> ---
>>>>>    MAINTAINERS                   |   2 +
>>>>>    drivers/net/dsa/Kconfig       |  12 ++++
>>>>>    drivers/net/dsa/Makefile      |   1 +
>>>>>    drivers/net/dsa/mt7530-mmio.c | 101 
>>>>> ++++++++++++++++++++++++++++++++++
>>>>>    drivers/net/dsa/mt7530.c      |  86 ++++++++++++++++++++++++++++-
>>>>>    drivers/net/dsa/mt7530.h      |  12 ++--
>>>>>    6 files changed, 206 insertions(+), 8 deletions(-)
>>>>>    create mode 100644 drivers/net/dsa/mt7530-mmio.c
>>>>>
>>>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>>>> index 14924aed15ca7..674673dbdfd8b 100644
>>>>> --- a/MAINTAINERS
>>>>> +++ b/MAINTAINERS
>>>>> @@ -13174,9 +13174,11 @@ MEDIATEK SWITCH DRIVER
>>>>>    M:    Sean Wang <sean.wang at mediatek.com>
>>>>>    M:    Landen Chao <Landen.Chao at mediatek.com>
>>>>>    M:    DENG Qingfang <dqfext at gmail.com>
>>>>> +M:    Daniel Golle <daniel at makrotopia.org>
>>>>>    L:    netdev at vger.kernel.org
>>>>>    S:    Maintained
>>>>>    F:    drivers/net/dsa/mt7530-mdio.c
>>>>> +F:    drivers/net/dsa/mt7530-mmio.c
>>>>>    F:    drivers/net/dsa/mt7530.*
>>>>>    F:    net/dsa/tag_mtk.c
>>>>> diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
>>>>> index c2551b13324c2..de4d86e37973f 100644
>>>>> --- a/drivers/net/dsa/Kconfig
>>>>> +++ b/drivers/net/dsa/Kconfig
>>>>> @@ -52,6 +52,18 @@ config NET_DSA_MT7530
>>>>>          Multi-chip module MT7530 in MT7621AT, MT7621DAT, MT7621ST and
>>>>>          MT7623AI SoCs is supported as well.
>>>>> +config NET_DSA_MT7988
>>>>> +    tristate "MediaTek MT7988 built-in Ethernet switch support"
>>>>> +    select NET_DSA_MT7530_COMMON
>>>>> +    depends on HAS_IOMEM
>>>>> +    help
>>>>> +      This enables support for the built-in Ethernet switch found
>>>>> +      in the MediaTek MT7988 SoC.
>>>>> +      The switch is a similar design as MT7531, however, unlike
>>>>> +      other MT7530 and MT7531 the switch registers are directly
>>>>> +      mapped into the SoCs register space rather than being 
>>>>> accessible
>>>>> +      via MDIO.
>>>>> +
>>>>>    config NET_DSA_MV88E6060
>>>>>        tristate "Marvell 88E6060 ethernet switch chip support"
>>>>>        select NET_DSA_TAG_TRAILER
>>>>> diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
>>>>> index 71250d7dd41af..103a33e20de4b 100644
>>>>> --- a/drivers/net/dsa/Makefile
>>>>> +++ b/drivers/net/dsa/Makefile
>>>>> @@ -8,6 +8,7 @@ endif
>>>>>    obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
>>>>>    obj-$(CONFIG_NET_DSA_MT7530_COMMON) += mt7530.o
>>>>>    obj-$(CONFIG_NET_DSA_MT7530)    += mt7530-mdio.o
>>>>> +obj-$(CONFIG_NET_DSA_MT7988)    += mt7530-mmio.o
>>>>
>>>> I'm not fond of this way. Wouldn't it be better if we split the mdio 
>>>> and
>>>> mmio drivers to separate modules and kept switch hardware support on
>>>> mt7530.c?
>>>
>>> You mean this in terms of Kconfig symbols?
>>> Because the way you describe is basically what I'm doing here:
>>>   * mt7530.c is the shared/common switch hardware driver
>>>   * mt7530-mdio.c contains the MDIO accessors and MDIO device drivers 
>>> for
>>>     MT7530, MT7531, MT7621, MT7623, ...
>>>   * mt7530-mmio.c contains the platform device driver for in-SoC 
>>> switches
>>>     which are accessed via MMIO, ie. MT7988 (and yes, this could be
>>>     extended to also support MT7620A/N).
>>
>> Ok great.
>>
>>>
>>> In early drafts I also named the Kconfig symbols
>>> CONFIG_NET_DSA_MT7530 for mt7530.c (ie. the common part)
>>> CONFIG_NET_DSA_MT7530_MDIO for the MDIO driver
>>> CONFIG_NET_DSA_MT7530_MMIO for the MMIO driver
>>>
>>> However, as existing kernel configurations expect 
>>> CONFIG_NET_DSA_MT7530 to
>>> select the MDIO driver, I decided it would be better to hide the 
>>> symbol of
>>> the common part and have CONFIG_NET_DSA_MT7530 select the MDIO driver 
>>> like
>>> it was before.
>>
>> You can "imply NET_DSA_MT7530_MDIO" from NET_DSA_MT7530 so the MDIO 
>> driver is also enabled when NET_DSA_MT7530 is selected. For example, 
>> on Realtek, both MDIO and SMI drivers are enabled by default when 
>> either of the main drivers are selected.
>>
>> config NET_DSA_MT7530
>>      tristate "MediaTek MT7530 and MT7531 Ethernet switch support"
>>      select NET_DSA_TAG_MTK
>>      select MEDIATEK_GE_PHY
>>      select PCS_MTK_LYNXI
>>      imply NET_DSA_MT7530_MDIO
>>      imply NET_DSA_MT7530_MMIO
> 
> The final kconfig should look like this:
> 
> config NET_DSA_MT7530
>      tristate "MediaTek MT7530 and MT7531 Ethernet switch support"
>      select NET_DSA_TAG_MTK
>      select MEDIATEK_GE_PHY
>      select PCS_MTK_LYNXI
>      imply NET_DSA_MT7530_MDIO
>      imply NET_DSA_MT7530_MMIO
>      help
>        This enables support for the MediaTek MT7530 and MT7531 Ethernet
>        switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT,
>        MT7621ST and MT7623AI SoCs, and built-in switch in MT7688 SoC is
>        supported.
> 
> config NET_DSA_MT7530_MDIO
>      tristate "MediaTek MT7530 MDIO interface driver"
>      default NET_DSA_MT7530

This is unnecessary.

Arınç