[PATCH V10 3/4] arm64: dts: qcom: Add support for ipq9574 SoC and RDP433 variant
Devi Priya
quic_devipriy at quicinc.com
Fri Mar 31 05:22:51 PDT 2023
On 3/28/2023 4:09 PM, Dmitry Baryshkov wrote:
> On Tue, 28 Mar 2023 at 10:31, Devi Priya <quic_devipriy at quicinc.com> wrote:
>> On 3/27/2023 8:15 PM, Dmitry Baryshkov wrote:
>>> On Mon, 27 Mar 2023 at 16:28, Devi Priya <quic_devipriy at quicinc.com> wrote:
>>>>
>>>> Add initial device tree support for Qualcomm IPQ9574 SoC and
>>>> Reference Design Platform(RDP) 433 which is based on IPQ9574
>>>> family of SoCs
>>>>
>>>> Co-developed-by: Anusha Rao <quic_anusha at quicinc.com>
>>>> Signed-off-by: Anusha Rao <quic_anusha at quicinc.com>
>>>> Co-developed-by: Poovendhan Selvaraj <quic_poovendh at quicinc.com>
>>>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh at quicinc.com>
>>>> Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
>>>> ---
>>>> Changes in V10:
>>>> - Renamed the Board Device Tree Source to use the RDP numbers
>>>> - Updated the Makefile, subject and commit message accordingly
>>>>
>>>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>>>> arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 84 ++++++
>>>> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 270 ++++++++++++++++++++
>>>> 3 files changed, 355 insertions(+)
>>>> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>>>> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>>> index 1a29403400b7..52f1f92c5195 100644
>>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>>> @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
>>>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
>>>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
>>>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
>>>> +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb
>>>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb
>>>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
>>>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
>>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>>>> new file mode 100644
>>>> index 000000000000..2ce8e09e7565
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>>>> @@ -0,0 +1,84 @@
>>>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>>>> +/*
>>>> + * IPQ9574 RDP433 board device tree source
>>>> + *
>>>> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
>>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +/dts-v1/;
>>>> +
>>>> +#include "ipq9574.dtsi"
>>>> +
>>>> +/ {
>>>> + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
>>>> + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
>>>> +
>>>> + aliases {
>>>> + serial0 = &blsp1_uart2;
>>>> + };
>>>> +
>>>> + chosen {
>>>> + stdout-path = "serial0:115200n8";
>>>> + };
>>>> +};
>>>> +
>>>> +&blsp1_uart2 {
>>>> + pinctrl-0 = <&uart2_pins>;
>>>> + pinctrl-names = "default";
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&sdhc_1 {
>>>> + pinctrl-0 = <&sdc_default_state>;
>>>> + pinctrl-names = "default";
>>>> + mmc-ddr-1_8v;
>>>> + mmc-hs200-1_8v;
>>>> + mmc-hs400-1_8v;
>>>> + mmc-hs400-enhanced-strobe;
>>>> + max-frequency = <384000000>;
>>>> + bus-width = <8>;
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&sleep_clk {
>>>> + clock-frequency = <32000>;
>>>> +};
>>>> +
>>>> +&tlmm {
>>>> + sdc_default_state: sdc-default-state {
>>>> + clk-pins {
>>>> + pins = "gpio5";
>>>> + function = "sdc_clk";
>>>> + drive-strength = <8>;
>>>> + bias-disable;
>>>> + };
>>>> +
>>>> + cmd-pins {
>>>> + pins = "gpio4";
>>>> + function = "sdc_cmd";
>>>> + drive-strength = <8>;
>>>> + bias-pull-up;
>>>> + };
>>>> +
>>>> + data-pins {
>>>> + pins = "gpio0", "gpio1", "gpio2",
>>>> + "gpio3", "gpio6", "gpio7",
>>>> + "gpio8", "gpio9";
>>>> + function = "sdc_data";
>>>> + drive-strength = <8>;
>>>> + bias-pull-up;
>>>> + };
>>>> +
>>>> + rclk-pins {
>>>> + pins = "gpio10";
>>>> + function = "sdc_rclk";
>>>> + drive-strength = <8>;
>>>> + bias-pull-down;
>>>> + };
>>>> + };
>>>> +};
>>>> +
>>>> +&xo_board_clk {
>>>> + clock-frequency = <24000000>;
>>>> +};
>>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>>> new file mode 100644
>>>> index 000000000000..3bb7435f5e7f
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>>> @@ -0,0 +1,270 @@
>>>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>>>> +/*
>>>> + * IPQ9574 SoC device tree source
>>>> + *
>>>> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
>>>> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>>> +#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
>>>> +#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
>>>> +
>>>> +/ {
>>>> + interrupt-parent = <&intc>;
>>>> + #address-cells = <2>;
>>>> + #size-cells = <2>;
>>>> +
>>>> + clocks {
>>>> + bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
>>>> + compatible = "fixed-clock";
>>>> + clock-frequency = <353000000>;
>>>> + #clock-cells = <0>;
>>>> + };
>>>
>>> What is the source for this clock? With it clocking at 353 MHz, I
>>> doubt that it is an external clock.
>> bias_pll_ubi_nc_clk (353MHz)is a backup source
>> for Q6_AXIM2_CLK/PCIE2_AXIM_CLK/PCIE3_AXIM_CLK/SNOC-CLK
>> It is from the CMN_PLL, and is the same as that of PPE core clock.
>> Do you suggest to move its clock-frequency to Board DT similar to
>> xo/sleep clock?
>
> No, I suggest moving it to the device where it originates. If it comes
> from GCC, it should be provided by the GCC, not by the top-level fixed
> clock.Bias PLL is a fixed PLL on the SoC which provides 352MHz.
As it is just a backup source for PCIE2_AXIM_CLK, we would remove the
clock node as it is not being used.
>
>>>
>>>> +
>>>> + sleep_clk: sleep-clk {
>>>> + compatible = "fixed-clock";
>>>> + #clock-cells = <0>;
>>>> + };
>>>> +
>>>> + xo_board_clk: xo-board-clk {
>>>> + compatible = "fixed-clock";
>>>> + #clock-cells = <0>;
>>>> + };
>>>> + };
>>>
>>> [skipped the rest]
>>>
>> Regards,
>> Devi Priya
>
>
>
Regards,
Devi Priya
More information about the linux-arm-kernel
mailing list