[PATCH 3/3] drm: sun4i: calculate proper DCLK rate for DSI
Roman Beranek
me at crly.cz
Fri Mar 31 04:02:45 PDT 2023
In DSI mode, TCON0's data clock is required to run at 1/4 the per-lane
bit rate.
Signed-off-by: Roman Beranek <me at crly.cz>
---
drivers/gpu/drm/sun4i/sun4i_tcon.c | 36 +++++++++++++++++-------------
1 file changed, 21 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index eec26b1faa4b..b263de7a8237 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -291,18 +291,6 @@ static int sun4i_tcon_get_clk_delay(const struct drm_display_mode *mode,
return delay;
}
-static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
- const struct drm_display_mode *mode)
-{
- /* Configure the dot clock */
- clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
-
- /* Set the resolution */
- regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
- SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
- SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
-}
-
static void sun4i_tcon0_mode_set_dithering(struct sun4i_tcon *tcon,
const struct drm_connector *connector)
{
@@ -367,10 +355,18 @@ static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
u32 block_space, start_delay;
u32 tcon_div;
+ /*
+ * dclk is required to run at 1/4 the DSI per-lane bit rate.
+ */
tcon->dclk_min_div = SUN6I_DSI_TCON_DIV;
tcon->dclk_max_div = SUN6I_DSI_TCON_DIV;
+ clk_set_rate(tcon->dclk, mode->crtc_clock * 1000 * (bpp / lanes)
+ / SUN6I_DSI_TCON_DIV);
- sun4i_tcon0_mode_set_common(tcon, mode);
+ /* Set the resolution */
+ regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
+ SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
+ SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
/* Set dithering if needed */
sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
@@ -438,7 +434,12 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon,
tcon->dclk_min_div = 7;
tcon->dclk_max_div = 7;
- sun4i_tcon0_mode_set_common(tcon, mode);
+ clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
+
+ /* Set the resolution */
+ regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
+ SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
+ SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
/* Set dithering if needed */
sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
@@ -515,7 +516,12 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
tcon->dclk_min_div = tcon->quirks->dclk_min_div;
tcon->dclk_max_div = 127;
- sun4i_tcon0_mode_set_common(tcon, mode);
+ clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
+
+ /* Set the resolution */
+ regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
+ SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
+ SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
/* Set dithering if needed */
sun4i_tcon0_mode_set_dithering(tcon, connector);
--
2.32.0 (Apple Git-132)
More information about the linux-arm-kernel
mailing list