[PATCH v6 08/19] clk: mediatek: Add MT8188 imgsys clock support

[Garmin Chang (張家銘)]

On Tue, 2023-03-14 at 10:10 +0100, AngeloGioacchino Del Regno wrote:
> Il 09/03/23 14:54, Garmin.Chang ha scritto:
> > Add MT8188 imgsys clock controllers which provide clock gate
> > control for image IP blocks.
> > 
> > Signed-off-by: Garmin.Chang <Garmin.Chang at mediatek.com>
> > ---
> >   drivers/clk/mediatek/Makefile         |   2 +-
> >   drivers/clk/mediatek/clk-mt8188-img.c | 110
> > ++++++++++++++++++++++++++
> >   2 files changed, 111 insertions(+), 1 deletion(-)
> >   create mode 100644 drivers/clk/mediatek/clk-mt8188-img.c
> > 
> > diff --git a/drivers/clk/mediatek/Makefile
> > b/drivers/clk/mediatek/Makefile
> > index fb66d25e98fd..935805632018 100644
> > --- a/drivers/clk/mediatek/Makefile
> > +++ b/drivers/clk/mediatek/Makefile
> > @@ -93,7 +93,7 @@ obj-$(CONFIG_COMMON_CLK_MT8186) += clk-mt8186-
> > mcu.o clk-mt8186-topckgen.o clk-mt
> >   				   clk-mt8186-cam.o clk-mt8186-mdp.o
> > clk-mt8186-ipe.o
> >   obj-$(CONFIG_COMMON_CLK_MT8188) += clk-mt8188-apmixedsys.o clk-
> > mt8188-topckgen.o \
> >   				   clk-mt8188-peri_ao.o clk-mt8188-
> > infra_ao.o \
> > -				   clk-mt8188-cam.o clk-mt8188-ccu.o
> > +				   clk-mt8188-cam.o clk-mt8188-ccu.o
> > clk-mt8188-img.o
> 
> imgsys can go under a different config option.
> 
> I won't send any more comments on the other 10 clocks for the same
> reason, so
> please split the clocks as needed. Check the others like MT8186,
> MT8192, MT8195.
> 
Thank you for your suggestions.

Ok, I will modify all mt8188 clocks about this in v7.


Thanks,
Best Regards,
Garmin